Navigation : EXPO21XX > FLUID 21XX > H12: Pneumatic Actuators, Motors and Cylinders > BETEX HYDRAULIC POWER
Videos
Loading the player ...
  • Offer Profile
  • Bega Special Tools was founded in 1978. Bega is manufacturer and distributor of Special Tools for safe, cost effective mounting and dismounting of bearings and transmission parts. The tools are used in production and maintenance departments in MRO and OEM companies. Bega exports to over 60 countries and serves all types of industries. With special solutions in for instance Wind, Rail, Mining and Steel industry.

    With our Special Tools we aim to improve the quality of maintenance and installation of rotating parts in machines, thus obtaining a longer lifespan.
Product Portfolio
  • Industrial Hydraulic Equipment (700-2800 bar)

  • BETEX® Hydraulic Power! Professional hydraulics for industrial use

    BETEX ®HYDRAULIC POWER! Is a growing range of high pressure workshop hydraulic equipment, developed by Bega Special Tools. Ideal for performing a wide variety of maintenance jobs in your workshop or production area. The products are produced and tested according to international standards (ISO 9001-2008). The maximum operating pressure is 700 bar standard.

    • Hydraulic cylinders, pumps, spreaders / lifting products, jacks, workshop presses and workbenches
    • Standard 700 bar
    • High pressure hand pumps in 1000, 1500 and 2800 bar
    • Compatible with major international brands
    • Supply from stock
      • Hydraulic cylinders 700 bar

          • JLLC cylinders, high tonnage, single acting, load return

          • CYLINDERS WITH LOCK NUT

            BETEX CYLINDERS JLLC series, high tonnage, single acting, load return


            Capacity : 50-1000 tons.
            Stroke : 50-300 mm.
            Max. working pressure : 10,000 psi / 700 bar

            • Single-acting, load return
            • Safety locknut for mechanical load holding
            • Stop ring for piston blow-out protection
            • Interchangeable, hardened, grooved saddle as standard
            • High flow coupler and dust cap included on all models
            • Rams inside roll-polished, outside blasted with black nitride finish
             
          • JLPC cylinders, high tonnage, single acting, load return, compact

          • CYLINDERS WITH LOCK NUT

            BETEX CYLINDERS JLPC SERIES, high tonnage, single acting, load return, compact


            Capacity : 60-1000 t
            Stroke : 50-300 mm
            Max force : 10,000 psi / 700 bar

            • Extremely low height for use in confined areas
            • Single-acting, load return
            • Safety locknut for mechanical load holding
            • Stop ring for piston blow-out protection
            • Interchangeable, hardened, grooved saddle as standard
            • High flow coupler and dust cap included on all models
            • Rams inside roll-polished, outside blasted with black nitride finish
          • ALNC cylinders, aluminium, single acting, load return

          • LIGHT WEIGHT ALUMINIUM CYLINDERS, WITH LOCK NUT

            BETEX ALNC series, single acting, load return


            Capacity : 50 - 100 tons
            Stroke : 50 - 250 mm
            Max force : 10,000 psi / 700 bar

            • Half the weight of steel cylinders
            • Locknuts offer extended load holding
            • Carrying handles standard on all models
            • Heavy duty spring for fast & full return
            • Cylinders inside are roll-polished
            • Black hard-anodized coating reduces wear and corrosion.
          • ACHC cylinders, aluminium, hollow, single acting

          • BETEX ACHC serie, hollow, single acting, spring return

            Capacity : 30 - 60 tons
            Stroke : 50 - 150 mm
            Max. force : 10,000 psi / 700 bar

            • Half the weight of steel cylinders
            • Heavy duty spring for fast & full return
            • Chrome plated centre hole for extra protection
            • Large bearing surfaces for side load protection
            • Carrying handles standard on all models
            • Hard-anodized coating reduces wear & corrosion
            • Stop rings for piston blow-out protection
            • Rod wiper protects inner cylinder from dirt
          • ADHC cylinders, hollow, double acting

          • BETEX ADHC series, hollow, double acting

            Capacity : 30-60 tons.
            Stroke : 50-250 mm.
            Max. working pressure : 10,000 psi / 700 bar

            • Half the weight of steel cylinders
            • Steel piston for protection against load damage
            • Chrome plated centre hole for extra protection
            • Carrying handles standard on all models
            • Hard-anodized coating reduces wear & corrosion
            • Stop rings for piston blow-out protection
            • Rod wiper protects inner cylinder from dirt
            • Rams inside roll-polished, the black hard-anodized coating reduces wear and corrosion.
          • NSSS cylinders, standard, single acting, spring return

          • BETEX NSSS series - single acting, spring return

            Capacity : 5 - 100 tons
            Stroke : 25.4 - 362 mm
            Max. working pressure : 700 Bar / 10,000 psi

            • All cylinders are single-acting with spring return
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish

            Pump and cylinder sets:
            All cylinders are available as sets (cylinder, gauge, couplers, hose and pump) for your ordering convenience
          • NSHS cylinders, hollow, single acting, spring return

          • BETEX NSHS series, center hollow, single acting, spring return

            Capacity : 12 - 100 tons
            Stroke : 8 - 158 mm
            Max. operating pressure : 700 bar / 10,000 psi

            • All rams are single-acting with spring return
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
          • NSLS cylinders, flat, single acting, spring return

          • BETEX NSLS Series, low height, spring return, single acting

            Capacity : 5 - 150 ton
            Stroke : 6 - 17 mm
            Max. operating pressure : 700 bar / 10.000 PSI

            • All rams are single acting with spring return
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
          • NSLS Telescopic cylinders, compact, load return, long stroke, single acting

          • BETEX NSLS-telescopic serie, load return, long stroke, single acting

            • Perfect for work in tight spaces in combination with large forces and a long stroke
            • 2 different tonnages: 10+5 and 20+10
            • The cylinders are single acting with load return
            • Hard chromed pistons
            • Rams inside roll-polished
            • Outside blasted with black nitride coating
          • NSCS cylinders, compact, short stroke, single acting, spring return

          • BETEX NSCS series, short stroke, single acting, spring return

            Capacity : 10 - 100 ton
            Stroke : 38 - 62 mm
            Max. operating pressure : 700 bar / 10.000 PSI

            • All rams are single acting with spring return
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
          • SSA cylinders, light weight aluminium, single acting, spring return

          • BETEX SSA-Series, single acting, spring return

            Custom stroke lengths and capacities are available

            • 8 standard models available for 50 to 100 tons
            • Up to 60% lighter than steel cylinders
            • Heavy duty spring for easy and full retraction
            • Large saddle surface for angle load protection
            • High-flow quality couplers
            • All models are provided with carry handles
            • Rod wiper protects inner rod from dirt
            • Hard-anodized housing and piston reduce wear and corrosion
            • Rams inside roll-polished, the black hard-anodized housing reduces wear and corrosion.
          • NDAC cylinders, double acting

          • BETEX NDAC Series - double acting

            Capacity : 10 - 100 tons
            Stroke : 150 - 470 mm
            Max operating pressure : 10,000 psi - 700 Bar

            • Perfect for construction, shipyards, utilities, mining and maintenance workshops
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
          • NDAH cylinders, hollow, double acting

          • BETEX NDAH Series, double acting

            Capacity : 30 - 100 ton
            Stroke : 76 - 257 mm
            Max operating pressure : 10,000 psi - 700 Bar

            • Perfect for construction, shipyards, utilities, mining and maintenance workshops
            • Hard chromed piston
            • Rams inside roll-polished, outside blasted with black nitride finish
        • Hydraulic hand and foot pump sets 700 bar

            • BETEX ALUMINIUM HAND PUMP SETS

            • All sets are ready-for-use, you can start working right away!

              All pumps are:
              • single acting (except AHP703, double-acting)
              • two-stage

              Our HAND PUMP SETS, include:
              • aluminium hand pump
              • T-adaptor
              • gauge
              • hose 1,8 mtr.
              • couplings
              • steel storage case
            • BETEX STEEL HAND PUMP SETS

            • BETEX STEEL HAND PUMP SETS

              All sets are ready-for-use, you can start working right away!

              All pumps are:
              • single acting
              • two-stage

              Our HAND PUMP SETS, include:
              • steel hand pump
              • T-adaptor
              • gauge
              • hose 1,8 mtr.
              • couplings
              • steel storage case
            • BETEX HIGH PRESSURE HAND PUMP SETS

            • BETEX HIGH PRESSURE HAND PUMP SETS

              All sets are ready-for-use, you can start working right away!

              All pumps are:
              • single acting
              • two-stage

              Our HAND PUMP SETS, include:
              • aluminium hand pump
              • T-adaptor
              • gauge
              • hose 1,8 mtr.
              • couplings
              • steel storage case
            • BETEX AP 1600S AIR-HYDRAULIC FOOT PUMP SET

            • BETEX HIGH PRESSURE HAND PUMP SETS

              The AP 1600S is new in our range of pump sets. This set is pre-mounted, you can get started right away!

              The pump is:
              • single acting
              • two-stage
              • 700 Bar

              This FOOT PUMP SET is supplied with:
              • Foot pump
              • T-adaptor
              • Pressure gauge
              • Hose 1,5 mtr.
              • Couplings
              • Steel storage case
          • Hydraulic hand pumps, 2-stage

              • AHP Light-Weight Aluminium hand pumps

              • BETEX AHP SERIES - ALUMINIUM HAND PUMPS, 700 BAR

                • Our 2-speed hand pumps are always characterized by their rugged construction and easy-operation handles.
                • Aluminium alloy construction and handy release knobs with locking mechanism are perfect for industrial applications and daily operations.
                • Special lightweight design with aluminium alloy construction makes for an easily portable and mobile unit.
                • Double-acting design on AHP703D is ideal for double-acting cylinders without the need for extra controlling valve and adaptors.
                • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
              • BETEX HP35 STEEL HAND PUMP HEAVY-DUTY

              • BETEX HP35 SERIES - STEEL HAND PUMPS, HEAVY-DUTY, 700 BAR

                • Our handpumps are always characterized by their rugged steel construction and easy-operation handles
                • The handy release knobs with locking mechanism are perfect for industrial applications and daily operations
                • Light weight design, easy to handle
                • Specially designed HP35D is for double-acting cylinders without the need for extra controlling valve and adapters
                • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
              • BETEX PB / HC-SERIE STEEL HAND PUMP HEAVY DUTY

              • BETEX PB / HC-SERIE STEEL HAND PUMPS, HEAVY DUTY, 700 BAR

                • High pressure (700 bar) hydraulic hand pumps for heavy work
                • 2-stage hand pumps for bringing the cylinder quickly under pressure
                • Little effort needed, easy operation
                • Automatic 10,000 psi overload-relief valve protects components in the hydraulic system and ensures safe operation
                • Our hand pumps are always characterized by their rugged construction and easy-operation handles
                • The professional choice for a large number of industrial applications and daily activities.
                • Handles for simple positioning
                • New in the range is the HC 2500 steel hand pump
              • BETEX HP80 STEEL HANDPUMP HEAVY-DUTY

              • BETEX HP80 SERIES - STEEL HAND PUMPS, HEAVY-DUTY, 700 BAR

                • Rugged construction made of steel
                • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                • New inlet/outlet design features slow deflation function reducing noise, and allows multidirectional operation
                • Two-speed pumps provide rapid pumping to load the cylinder quickly
                • Specially designed HP80D is for double-acting cylinders without the need for extra controlling valve and adapters
              • P 900 series Steel heavy duty hand pumps

              • BETEX P 900-SERIES - STEEL HAND PUMPS, HEAVY-DUTY 700 BAR

                • High pressure (700 bar) hydraulic hand pumps for heavy work
                • 2-stage hand pumps for bringing the cylinder quickly under pressure
                • Little effort needed, easy operation
                • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                • Our hand pumps are always characterized by their rugged construction and easy-operation handles
                • Handles for simple positioning
                • The professional choice for a large number of industrial applications and daily activities
                • P 904D is a double acting hand pump for use of a double-acting cylinder
              • P 350 / P 550 / P 1000 special hand pumps

              • BETEX P 350 / P 550 / P 1000 SPECIAL HAND PUMPS, WITH SEALED RESERVOIR 700 BAR

                • Special lightweight design with unique triangle hand-held base for easy handling and operation
                • The sealed aluminium oil reservoir allows the handpumps to be operated at all angles without the risk of air contamination and oil spills;


            • Betex Foot pumps

                  • Hydraulic foot pumps 700 bar

                  • BETEX FHB SERIES - FOOT PUMPS, 700 BAR

                    • Betex® innovative foot pumps are not only attractively designed, but are also durable and stable
                    • Foot-operated pump and release pedal, providing accurate control for operating in different conditions
                    • Spring-loaded foot pedal is convenient and easy to operate
                    • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
              • Hydraulic air pumps

                  • BETEX AP921 FOOT PUMP

                  • BETEX AP921 - AIR-HYDRAULIC FOOT PUMP, 700 BAR

                    • The air-driven hydraulic pump is designed for use with single-acting cylinders and tools like the Betex cylinder serie
                    • Rugged construction: most components are made of aluminium alloy and are built for long service life, easy operation and portability
                    • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                    • New inlet/outlet design features slow deflation function reducing noise, and allows multidirectional operation
                  • BETEX AP1600/3000 FOOT PUMPS

                  • BETEX AP1600/3000 SERIES AIR/HYDRAULIC PUMPS, 700 BAR

                    • The air-driven hydraulic pump is designed for use with single-acting cylinders and tools like the Betex cylinder serie
                    • Rugged construction: most components are made of aluminium alloy and are built for long service life, easy operation and portability
                    • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                    • New inlet/outlet design features slow deflation function reducing noise, and allows multidirectional operation
                    • The AP1600D + AP3000D-models are specially designed for double-acting cylinders without the need of an additional control valve and connecting pieces
                    • The AP1600S is also available in a complete set
                  • AP 13 air pumps

                  • BETEX AP 13 AIR PUMPS, single and double acting

                    • Two-speed operation
                    • 3 liter durable aluminium reservoir design
                    • Air motor capable of starting under full load
                    • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                    • AP 13S is single acting; the AP 13D models are specially designed for double-acting cylinders without the need of an additional control valve and connecting pieces
                  • AP 18 air pumps

                  • BETEX AP 18 AIR PUMPS, single and double acting

                    • Two-speed operation
                    • 8 liter durable aluminium reservoir design
                    • Air motor capable of starting under full load
                    • Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation
                    • AP 18S is single acting; the AP 18D models are specially designed for double-acting cylinders without the need of an additional control valve and connecting pieces
                • Electric pumps

                    • BETEX EP13 ELECTRIC PUMPS 3L

                    • BETEX EP13 SERIES - ELECTRIC HYDRAULIC PUMPS, 3L -
                      700 BAR


                      • Electric pump 400V, 5A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation
                      • Specially designed EP13D is for double-acting cylinders without the need for extra controlling valve and adapters
                    • BETEX EP18 ELECTRIC PUMPS 8L

                    • BETEX EP18 SERIES - ELECTRIC HYDRAULIC PUMPS, 8L
                      700 BAR

                      • Electric pump 230V, 10A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation
                      • Specially designed EP18D is for double-acting cylinders without the need for extra controlling valve and adapters
                      • Type EP18SS and EP18DS are fitted with a solenoid valve
                    • BETEX EP211 ELECTRIC PUMPS 11L

                    • BETEX EP211 SERIES - ELECTRIC HYDRAULIC PUMPS, 11L -
                      700 BAR

                      • Electric pump 230V, 12A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation
                      • Specially designed EP211D is for double-acting cylinders without the need for extra controlling valve and adapters
                      • Type EP211SS and EP211DS are fitted with a solenoid valve
                    • BETEX EP320 ELECTRIC PUMPS 20L

                    • BETEX EP320 SERIES - ELECTRIC HYDRAULIC PUMPS, 20L -
                      700 BAR

                      • Electric pump 400V, 5A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation
                      • Specially designed EP320D is for double-acting cylinders without the need for extra controlling valve and adapters
                    • BETEX EP420 ELECTRIC PUMPS 20L

                    • BETEX EP420 SERIES - ELECTRIC HYDRAULIC PUMPS, 20L -
                      700 BAR

                      • Electric pump 400V, 6A, 50/60 Hz universal induction motor, thermal protected
                      • Very quiet (about 80dBA at 700 Bar)
                      • Remote control incl cord (3m)
                      • Automatic overload-relief valve (700 bar) protects components in hydraulic systems and ensures safe operation
                      • Specially designed EP420D is for double-acting cylinders without the need for extra controlling valve and adapters
                  • Ultra High pressure pumps

                      • P 905 / AHP 704/5 / UHP 2800 ultra/high pressure hand pumps

                      • ALUMINIUM HAND PUMPS: 1000 / 1500 / 2800 BAR
                         
                        • AHP704: high working pressure up to 1000 / 1500 bar
                        • UHP2800 light weight model for ultra high working pressure of 2800 bar for special applications
                        • Automatic overload-relief valve protects components in hydraulic systems and ensures safe operation
                      • UHAP ultra high pressure air pumps 2800 BAR

                      • General purpose air driven ultra high pressure hydraulic pump suitable for pumping water and oil up to 2800 bar
                         
                        • Portable, Compact
                        • Single acting
                        • Max. driving pressure: 7 bar/100psi
                        • Max. output pressure: 2800 bar
                        • With easy to connect bayonet coupler and flexible hose (3 mtr)
                        • Automatic overload-relief valve
                        • Including air filter
                        • Optional: trolley
                    • Workshop presses

                        • BETEX SHOP PRESSES 10T

                        • BETEX WORK SHOP PRESSES 10 TONS

                          Professional workshop presses

                          • Tonnage: 10 ton, stroke: 250 mm
                          • Robust steel frame and steel crossbars ensure maximum stability and prevents bending when loaded
                          • Multiple working positions for press bed
                          • Includes gauge for precise control of the press force
                          • The single acting spring return cylinder is horizontally moveable on the upper frame
                          • Also available with hand- electric- or air-hydraulic pump
                          • Including adaptors and accessories
                          • Also available in following models: 25, 50 & 100 tons
                        • BETEX SHOP PRESSES 25T

                        • BETEX WORK SHOP PRESSES 25 TONS

                          Professional workshop presses

                          • Tonnage: 25 ton, stroke: 250 mm
                          • Robust steel frame and steel crossbars ensure maximum stability and prevents bending when loaded
                          • Multiple working positions for press bed
                          • Includes gauge for precise control of the press force
                          • The single acting spring return cylinder is horizontally moveable on the upper frame
                          • Also available with hand- electric- or air-hydraulic pump
                          • Including adaptors and accessories
                          • Also available in following models: 10, 50 & 100 tons
                        • BETEX WSPM SHOP PRESSES HAND OR FOOT OPERATED, 15, 30 AND 50 TON

                        • BETEX WSPM SHOP PRESSES HAND OR FOOT OPERATED, 15, 30 AND 50 TON

                          These robust hydraulic workshop presses are suited for professional assembly work, or for professional testing of a wide range of components. They are used for pressing, straightening, bending, punching, assembly, disassembly, etc.

                          The piston is easy to operate using the hand pump. While operating the press, operation can be switched from hand pump to foot pump.

                          • High quality! The robust steel frame is welded for maximum stability and a long life span.
                          • The worktable offers easy height adjustability.
                          • Extremely suitable for high-precision work.
                          • The 50-ton version of the press is equipped with a hoist.
                          • Chrome-plated piston with automatic return.
                          • Single-acting and spring-return cylinder can be moved horizontally on the upper frame.
                          • Includes gauge for exact press force readings.
                          • Includes a set of V adapters.
                        • BETEX WSPE SHOP PRESSES ELECTRIC, 30 - 300 TON

                        • BETEX WSPE SHOP PRESSES ELECTRIC, 30 - 300 TON

                          These electric hydraulic workshop presses are suited for general assembly work, straightening, and for testing a wide range of components.

                          Unique! You have a choice of two different piston speeds: as soon as the rapidly lowering piston detects counter pressure, it will automatically switch back to a lower speed.

                          • High quality! The robust steel frame is welded for maximum stability and a long life span.
                          • Extremely well suited for high-precision work, manual or electric operation.
                          • Work surface height is easy to adjust.
                          • Cylinder can be moved horizontally on the upper frame
                          • Two piston speeds, chrome-plated piston with removable piston head.
                          • Includes gauge for exact press force readings.
                          • Joystick for high-precision piston operation.
                          • Double-acting hand pump (except for 300-ton version) for high-precision piston operation.
                          • 220V CEE connector to connect a lamp or drill, if required.
                        • BETEX PFPE PORTAL PRESSES, MANUAL - 100 - 160 TON

                        • BETEX PFPE PORTAL PRESSES, ELECTRIC or MANUAL OPERATION, 100 - 160 TON

                          These robust hydraulic portal presses are made of high-grade steel and extremely suitable for the shaping, straightening, or bending of large sheets and heavy materials.

                          The frame can be moved lengthwise and the cylinder can be moved sideways, enabling access to the material from all sides. Frame and cylinder (double-acting) can be moved electrical.

                          All portal presses are equipped with a double-acting cylinder with a chrome-plated piston and anti-wear guideways to protect the cylinder. This press bushing has been designed especially so that different attachments can be fitted to it.
                          The piston stroke is easy to set using the dedicated switches.

                          The two-speed electric hydraulic pump automatically switches to the lower speed when it detects counter pressure.
                          The hydraulic pump is also equipped with a pressure controller and a gauge.
                          Made of ST-52 3 steel.
                        • BETEX PFPE Electric 150-300T

                        • BETEX PFPE PORTAL PRESSES, ELECTRIC OPERATION, 150 - 220 - 300 TON

                          These robust hydraulic portal presses are made of high-grade steel and extremely suitable for the shaping, straightening, or bending of large sheets and heavy materials.

                          The frame can be moved electrical in lengthwise and the cylinder can be moved electrical sideways, enabling access to the material from all sides.

                          All portal presses are equipped with a double-acting cylinder with a chrome-plated piston and anti-wear guideways to protect the cylinder. This press bushing has been designed especially so that different attachments can be fitted to it.
                          The piston stroke is easy to set using the dedicated switches.

                          The two-speed electric hydraulic pump automatically switches to the lower speed when it detects counter pressure.
                          The hydraulic pump is also equipped with a pressure controller and a gauge.

                          Made of ST-52 3 steel. The presses are supplied without oil. (Advice: Tellus 46)
                      • Hydraulic jacks

                          • BETEX TOE JACKS

                          • BETEX TOE JACKS

                            • heat-treated and chrome-plated hydraulic rod provides longer seal life and optimal performance
                            • internal safety valve prevents toe jack being used beyond its rated capacity
                            • leakages are prevented by welding the housing onto the forged base
                            • strong toe lift for long service life
                            • low toe heights for tight spaces
                            • swivel sockets for easy operation
                            • toe jacks can be operated quickly by hand without a load
                            • removable handle makes unit easier to operate
                          • BETEX CJ CYLINDERS

                          • BETEX CYLINDERS - CJ series

                            Capacity : 10 or 20 tons
                            Stroke: 41 mm
                            Max. working pressure: 10,000 psi / 700 bar

                            • Spring-loaded
                            • Piston hard chromed
                            • Ram inside roll-polished
                            • Perfect for jobs with limited space, like positioning machines, mounting tools or load tests
                        • Betex Nutsplitters

                              • Hydraulic nutsplitters

                                • Compact design used in confined space with enough force to split rusted nuts
                                • All models feature a rugged one-piece cutting frame coupled to a heavy-duty hydraulic cylinder
                                • Specially designed "tool steel" cutter blade cuts the nut to the precise point where it cracks
                                • Unique angled head design to keep full contact with the nut being penetrated
                                • Unique angled cutter blade with radius to have greater resistance to cutting and breaking nuts
                                • 5 popular models applicable to cover the largest range of nut sizes
                          • Hydraulic spreaders, lifting wedges, flange spreaders

                              • BETEX PORTABLE POWER KITS

                              • PORTABLE POWER KITS

                                Available in 2 types:
                                • Set PPK 4, including 4 tons cylinder, 100 mm stroke in handy carrying case
                                • Set PPK 10, including 10 tons cylinder, 150 mm stroke, in handy carrying case on wheels

                                Advantages:
                                • "Snap-on" design for quick and easy assembly and disassembly
                                • Extra thick extension rods designed for strength prevent bending
                                • Single acting pump, 700 bar with safety valve to prevent overloading
                                • Flexible hydraulic hose, 1,8 mtr
                                • Versatile through many different accessories!
                                • All parts are made of forged steel
                              • BETEX 15 TL / 15 TLS / 25 TLS HYDRAULIC SPREADER / LIFTING WEDGE

                              • These patented Special Tools are simple and very practical for spreading or lifting loads, such as engines, gearboxes, flanges, etc., with high accuracy

                                Advantages / applications

                                • Loads are lifted perpendicularly!
                                • Ideal for numerous industrial maintenance repair jobs
                                • Accurate height adjustments (for instance shaft alignment) can easily be executed by one person
                                • Easy, light and very practical to use
                                • Particularly suitable when available space is very limited
                                • Suitable for spaces of 5 to 43 mm
                                • Due to the reduced thickness of the jaws, made of high quality hardened steel, these wedges can be used for jobs where working space is extremely limited
                                • Including safety block to secure the load and remove the lifting wedge

                                 
                              • BETEX PFS 10T HYDRAULIC FLANGE SPREADERS

                              • Applications
                                • Spreading flanges is safe and easy with a set of hydraulic flange spreaders.
                                • No more use of hammer and chisel, so less strenuous, time saving and most of all safe working
                                • Use flange spreaders in sets for an even higher spreading force
                                • Adjustable claw widths from 104 mm to 216 mm for a large number of applications
                                • Special wedge for larger spread
                                • Usable up to a max. flange width of 2 x 92 mm. The flange bolt has a min. diameter of 31.75 mm
                                • With safety block to secure the load and remove the spreader


                                 

                            • Mobilift hydraulic work benches

                                  • BETEX MOBILIFT

                                  • BETEX MOBILIFT - mobile lifting tables - 400 KG and 1000 KG

                                    • Betex mobile lifting tables can be supplied in 2 models.
                                    • The height can be adjusted using an hydraulic foot pump and cylinder, complete with a lockable valve that prevents the table from collapsing too quickly, even if the hose breaks.
                                    • With CE marking!

                                    Suitable as mobile workbench: promotes occupational ergonomics.
                              • Dismounting

                              • With the help of the right puller you can disassemble bearings, couplings, rings, etc. in no time at all. Capacities from 4 to 150 tons.

                                You can choose from mechanical and hydraulic pullers, 2- or 3-jaw pullers; external, internal, blind, reversible, heavy duty. The unique self-centering series provide great user convenience. Legs do not come loose and the well-distributed pulling force prevents damage to the workpiece and / or shaft. The HP and HSP hydraulic pullers have a built-in pump and cylinder, making them suitable for use in places with limited space. For safe bearing disassembly, choose our self-centering pullers!
                                  • BETEX mechanical pullers

                                      • MSP 2/3-arm pullers, self-centering

                                      • Safe and easy dismounting of bearings, couplings, rings, etc.

                                        • Ergonomic design, easy to operate by one person.
                                        • Practical! Self-centering 2-arm or 3-arm puller, including locking. Easy to convert, can be used in any position.
                                        • Safe! The arms slide inwards or outwards simultaneously. Bending or deflecting is impossible.
                                        • Economical! 2-arm or 3-arm puller combination, 2 pullers for the price of one.
                                        • Strong! The harder the pulling force, the tighter the jaws grip around the workpiece.

                                        Advantages of unique self-centering pullers:

                                        • The arms slide inwards or outwards simultaneously.
                                        • Prevents damage to shaft and object being pulled.
                                        • Can be operated by one person.
                                        • Work efficiently and save time.
                                      • KZZ parallel key extractors

                                      • For professional removal of parallel keys
                                        With the BETEX KZZ, you can easily remove keys from shafts of motors, pumps and all kinds of other applications in drive technology. For keys up to a width of 35 mm.

                                        Safe!
                                        Hammer and chisel are no longer needed.

                                        Advantages

                                        • Safe dismounting.
                                        • Quick dismounting.
                                        • No damage to shafts or keys due to perpendicular dismounting.
                                        • Shafts remain straight.
                                        • Saves time, labour and costs.
                                        • Jaws are made from specially tempered steel.
                                        • Threaded screws with left and right trapezoidal thread.
                                      • MP10/11 universal 2-arm pullers

                                      • Simple, handy 2-arm puller for external grip. Suitable for dismantling pulleys, bearings, rings and fans of electric motors. During dismantling, the arms cannot slip because they are pressed against the puller bridge. The greater the pressing force, the tighter the arms grip on the workpiece!

                                        These pullers are also available with extended arms for even greater capacity.

                                        • External puller
                                        • 2-arms
                                        • Available as MP10 in 9 standard sizes 
                                        • Available as MP11 in 9 sizes with extended arms
                                      • MP15/16 universal 2/3-arm pullers

                                      • Simple, handy 2/3-arm puller for parts gripped externally like pulleys, bearings, rings, etc. Suitable for removing fans from electric motors. During operation, the arms cannot slip because they are pressed against the cross bar. The harder the pulling force, the tighter the jaws grip around the workpiece. These pullers are also available with extended arms for even larger capacity.

                                        • External puller 
                                        • 2- or 3-arms
                                        • Available in 9 standard sizes
                                        • Available in 9 sizes with extended arms
                                      • MP20 2-arm pullers

                                      • This 2-arm puller is extremely well-suited to applications involving the extraction of bearings, rings, sprockets, couplings etc. The jaws are forged and therefor extra strong. Reversal of the arms makes internal dismantling also possible. The self-locking system guarantees that the arms will not deflect.

                                        • External and internal puller 
                                        • 2-arms, reversible 
                                        • Self-locking
                                        • Also available as set MP20000 with a display including 5 sizes: MP20080, MP20115L, MP20155, MP20195, MP2025
                                      • MP25 universal 2-arm bearing pullers

                                      • These bearing pullers are particularly suitable for extracting bearings, bearing rings, gears, discs etc. for tight or difficult to reach areas. First lateral force is applied to grip the part with the sharp jaws. These grip on the radius of the outer ring. Due to the special construction, the arms cannot move during use. You prevent damage and save time.

                                        • External puller 
                                        • 2-arms
                                        • For tight spaces
                                        • Special jaw construction for extra strong grip


                                      • MP26 2-arm pullers, cross arms

                                      • This puller is particularly suitable for extracting bearings, pinions, pulleys etc. for tight or difficult to reach areas.

                                        • External puller 
                                        • 2-arms
                                        • For a wider spread and depth, puller arms can be assembled in variable positions
                                        • Easy to handle, cross arm puller 
                                      • MP30 2/3-arm pullers, selfcentering

                                      • The 2/3 arms of these pullers adjust themselves simultaneously and symmetrically, inwards, or outwards. Work efficient with perfect positioning of the arms. The arms cannot bend or deflect. The higher the pulling force, the tighter the grip of the arms. 

                                        These pullers are also available with extended arms for even larger capacity.

                                        • External puller 
                                        • 2- or 3-arms 
                                        • Self-centering
                                        • Available in 6 standard sizes 
                                        • Available in 3 sizes with extended arms
                                      • MP40 4-arm ball bearing pullers

                                      • These four-arm bearing puller have been specially developed to extract ball-bearings from casings and shafts simultaneously. For when there is no free space internally or externally. The arms grip the bearing between the inner- and outer ring. For extra grip and the desired leverage effect, a supplied ring can be used. The blue numbered bearings are dismantled without the ring.

                                        Used for the 6000, 6200, 6300 and 6400 bearing series.

                                        • Internal puller 
                                        • 4-arms 
                                        • Available as set MP40900 in handy case with 3 sizes: MP40100, MP40200, MP40300
                                      • MP50 Expanders, countersupports and slide hammerss

                                      • This special expander system has been developed to facilitate rapid and effective dismantling under difficult conditions, e.g., in 'blind holes'. The multiple adjustable jaws (up to 6) ensure the correct grip from behind the bearing. Deflection is impossible. The counter supports are universal, which means that the arms can be twisted in any direction to find the best point of pressure.

                                        The larger types are equipped with a conical puller adapter in the expander, which prevents friction when tightening the screw. Bearings, bushings, seal rings etc. are extracted effortlessly.

                                        • Internal puller combination
                                        • Combine with sliding hammer or counter support
                                        • Collets MP50507 and MP50811 have no housing
                                        • Also available in 7 different sets, including sliding hammer and/or counter support


                                      • MP60/65 bearing splitters, countersupports, sets

                                      • BETEX MP60/MP65 are constructed for the dismounting of hard-to-reach bearings and other parts, where there is insufficient space for grip with a puller. Suitable for multiple applications. 

                                        • External puller combination 
                                        • Available in 8 splitter sizes with matching counter supports 
                                        • Available separately or as set
                                        • Large spindles have retractable points 


                                      • BETEX Shaft protectors

                                      • Shaft protector sets for shaft centers and hollow shafts.

                                        Designed to protect shaft centres from distortion when extreme pressures are applied. Inserted between the shaft and puller spindle. 

                                        There are 2 types, 625 for shaft centre protection and 630 for hollow shafts.

                                        Using these protectors prevents damage to the centre hole and the spindle.

                                      • BETEX MP35 hydraulic mini press 8 tons

                                      • This auxiliary tool is used to increase pressure for stuck parts. The hydraulic mini press is placed between the shaft and the spindle. It administers a 5 mm stroke; max pressing capacity is 8 tons. The impact loosens the stuck workpiece. This prevents overloading and wear on the spindels. 

                                        • Combine with mechanical pullers 
                                        • Time-saving
                                        • Prevents overload
                                        • Protects spindles from bending
                                        • Use for bearings, gears, sprockets, discs etc. 
                                    • BETEX hydraulic bearing pullers

                                        • HP 2/3-arm pullers 4-30 t

                                        • Compact pullers with integrated pump and cylinder 

                                          for dismounting components such as bearings, bushings, wheels, couplings and pulleys

                                          • The self-contained hydraulic pump saves space, as you don’t need a separate pump, hose or cylinder. 
                                          • The stronger the pulling force, the tighter the jaws grip around the workpiece. Bending or deflecting is impossible. 
                                          • 2-arm or 3-arm puller combination, easy to convert. 
                                          • Integral safety release valve prevents overload and ensures that you never exceed the maximum force. 
                                          • The lightweight telescopic handle can be rotated 360°. 
                                          • Can be used in any position. 
                                          • Safety net/blanket and adapters included. 
                                          • In useful carrying case. 

                                          Advantages of unique self-centering pullers:

                                          • The arms slide inwards or outwards simultaneously.
                                          • Prevents damage to shaft and object being pulled.
                                          • Can be operated by one person.
                                          • Work efficiently and save time.
                                        • HSP 2/3-arm pullers 4-30 t self-centering

                                        • Compact pullers with integrated pump and cylinder 

                                          for dismounting components such as bearings, bushings, wheels, couplings and pulleys

                                          • The self-contained hydraulic pump saves space, as you don’t need a separate pump, hose or cylinder.
                                          • The stronger the pulling force, the tighter the jaws grip around the workpiece. Bending or deflecting is impossible.
                                          • 2-arm or 3-arm puller combination, easy to convert.
                                          • Integral safety release valve prevents overload and ensures that you never exceed the maximum force.
                                          • The lightweight telescopic handle can be rotated 360°.
                                          • Can be used in any position.
                                          • Safety net/blanket and adapters included.
                                          • In useful carrying case.
                                          • HSP pullers are self-centering.
                                          • 2-arm or 3-arm puller can be rotated 360°
                                          • HSP is self-centering 

                                          Advantages of unique self-centering pullers:

                                          • The arms slide inwards or outwards simultaneously.
                                          • Prevents damage to shaft and object being pulled.
                                          • Can be operated by one person.
                                          • Work efficiently and save time.


                                        • HXP 2/3-arm pullers 8-50 t self-centering

                                        • Safe and user-friendly dismounting of bearings, couplings, rings, etc. 

                                          • Separate 2-stage handpump available. 
                                          • Self-centering 2-arm or 3-arm puller, easy to convert. 
                                          • The arms slide inwards or outwards simultaneously. 
                                          • The stronger the pulling force, the tighter the jaws grip around the workpiece. Bending or deflecting is impossible. 
                                          • HXP503 also available with mobile crane (see page 62 + 63). 
                                          • Accessory sets available for the 8-ton and 12-ton versions. 
                                          • In useful carrying case. 
                                          • Adapters included. 

                                          Advantages of unique self-centering pullers:

                                          • The arms slide inwards or outwards simultaneously.
                                          • Prevents damage to shaft and object being pulled.
                                          • Can be operated by one person.
                                          • Work efficiently and save time.


                                        • Tri-Section Pullers

                                        • Hydraulic jaw puller set 

                                          • Complete hydraulic puller set, including Tri-section Plate, for safe and easy dismounting
                                          • The thin edge of the bearing splitters ensures to remove the most difficult graspable components
                                          • The firm grip behind a bearing's inner and outer rings ensures that the pulling forces are not transmitted through the moving parts, preventing damage to the bearing.
                                          • Most parts are forged SCM440 alloy steel, creating a very safe and durable product. 

                                          The complete set includes: 

                                          • Integrated pump and cylinder 
                                          • Handle 360 degrees adjustable
                                          • Tri-section plate 
                                          • Puller block 
                                          • Connection rods 
                                          • Steel storage case
                                        • HPP Push Puller

                                        • BETEX HPP Push Puller: three-in-one tool, self-centering

                                          This unique patented self-centering design provides end users with a three-in-one tool to easily and safely fit or remove bearings and sleeves using either their outer or inner edges.

                                          The push puller is specially designed for combined pushing and pulling. This creates one tool that uses even force to enable very easy pushing and pulling.

                                          The pushing jaw fits on the bearing’s inner ring, preventing the transmission of forces and/or heat through the outer ring to the moving parts, minimizing the risk of bearing damage.

                                          User- Friendly

                                          • Unique, patented double-action pump body to provide pushing and pulling force.
                                          • Unique jaw design for mounting and outer-ring pulling without removing and changing.
                                          • Three-jaw structure always provides an even and constant force, whether mounting, outer-ring pulling or inner-ring pulling.
                                          • Depends on user requirements - the extension bars can be used where necessary for extra reach.
                                          • Self-centering design of the inner puller always provides an even force and prevents jaws sliding off during operation.
                                        • HP/HSP/HXP Accessory sets

                                        • ETEX Bearing splitters

                                          This accessory set consists of:

                                          • 1 puller block
                                          • 2 connecting rods (legs)
                                          • 1 set of bearing splitters for a min./max Ø 15-290 mm
                                        • Tri-Section Pulling Plates

                                        • The Tri-Section Pulling Plates BETEX STP-3 are specially designed for 3-arm (hydraulic) pullers. 

                                          The unique and patented design creates maximum spread and applies even force. The Tri- Section Plate can be mounted behind the inner and outer bearing ring. This prevents the pulling force from being transmitted through the moving parts, so the bearing is not damaged. 

                                          Advantages

                                          • The unique design with hinge mechanism ensures maximum spread. 
                                          • Thanks to the 3 pulling plates, the force is evently distributed. 
                                          • Suitable for all 3-arm pullers. 
                                          • Available in 4 different sizes, suitable for shaft diameters from 26 to 495 mm. 
                                      • Betex mobile hydraulic pullers

                                          • BETEX MOBIPULLER 25 & 50 TONS

                                          • BETEX MOBIPULLER - hydraulic mobile puller - 25 & 50 Tons

                                            For dismantling of machine parts such as bearings, couplings, gears and other parts, with relative speed and ease.
                                            The Mobipuller excels through functional and ergonomic operation. It is stable, mobile and adjustable in height.

                                            A maximum tractive force of either 25 or 50 tons can be applied with diameters of upto 430 mm.
                                            To ensure safe and easy operation the electrical models are equiped with remote control.

                                            Applications: ideal for work shops in maintance and production companies.
                                          • BETEX HXPM PULLER 50 TONS - 2 ARM

                                          • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                            Practical
                                            The puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
                                            Flexible
                                            The complete stroke is 330 mm. Four adapters (extensions) are included with a maximum length of 620 mm.
                                            Strong
                                            The harder the force, the tighter the jaws grip. The arms cannot bend or deflect.
                                            Safe
                                            The integral safety release valve prevents overloading and ensures that you will never exceed the maximum power capacity.
                                          • BETEX HXPM PULLER 50 TONS - 2/3 arm

                                          • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                            Practical
                                            The puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
                                            Flexible
                                            The complete stroke is 330 mm. Four adapters (extensions) are included with a maximum length of 620 mm.
                                            Strong
                                            The harder the force, the tighter the jaws grip. The arms cannot bend or deflect.
                                            Safe
                                            The integral safety release valve prevents overloading and ensures that you will never exceed the maximum power capacity.
                                          • BETEX HXPC PULLER 50 TONS WITH CRANE

                                          • For dismounting of all kinds of transmission parts such as bearings, couplings, gears,wheels etc.

                                            Practical
                                            The puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
                                            Fast
                                            The complete stroke is 159 mm. Two adapters (extensions) are included for a total length of 310 mm.
                                            Strong
                                            The harder the force, the tighter the jaws grip. The arms cannot bend or deflect.
                                            Safe
                                            The integral safety release valve prevents overloading and ensures that you will never exceed the maximum power capacity.
                                          • BETEX HXPM PULLER 100 TONS - 2 ARM

                                          • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                            Practical
                                            The puller is self-centering, easy to maneuver and adjustable in height. The arms slide inwards or outwards simultaneously.
                                            Flexible
                                            The complete stroke is 270 mm. 7 adapters (extensions) with a total length of 1125 mm are included.
                                            Strong
                                            The harder the force, the tighter the jaws grip.
                                            The arms cannot bend or deflect.
                                            Safe
                                            The integral safety release valve prevents overloading and ensures that you will never exceed the maximum
                                            power capacity.
                                          • BETEX HXPM PULLER 100 TONS - 2/3 ARM

                                          • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                            Practical
                                            The puller is self-centering, easy to maneuver and adjustable in height. Easy to convert to 2-arm or 3-arm puller. The arms slide inwards or outwards simultaneously.
                                            Flexible
                                            The complete stroke is 270 mm. 7 adapters (extensions) with a total length of 1125 mm are included.
                                            Strong
                                            The harder the force, the tighter the jaws grip.
                                            The arms cannot bend or deflect.
                                            Safe
                                            The integral safety release valve prevents overloading and ensures that you will never exceed the maximum
                                            power capacity.
                                          • BETEX HXPM PULLER 150 TONS - 3 ARM

                                          • For dismounting of all kinds of transmission parts such as bearings, couplings, gears, wheels etc.

                                            Practical
                                            The puller is self-centering, easy to maneuver and adjustable in height. The arms slide inwards or outwards simultaneously.
                                            Flexible
                                            The complete stroke is 325 mm. 7 adapters (extensions) with a total length of 1125 mm are included.
                                            Strong
                                            The harder the force, the tighter the jaws grip.
                                            The arms cannot bend or deflect.
                                            Safe
                                            The integral safety release valve prevents overloading and ensures that you will never exceed the maximum
                                            power capacity.

                                            It is not possible to convert this type to a 2 arm model
                                        • Mounting

                                        • Tools for damage-free assembly of bearings, couplings, gears, bushings, bearing rings, etc. Correct assembly improves the life of your machines and production. Use of appropriate tools will improve the quality of production. This affects machine downtimes and loss of production. When equipment fail, then it is important that technicians have the proper tools, in order to effectively carry out repairs.
                                            • Handheld precision heaters

                                            • Small size induction heaters for use in workshops and on location. Safe, clean and controlled heating, no open flames. 

                                              Betex iDuctors: the ultimate precision heating tool to loosen stuck parts. (nuts, bolts, bearings). All sorts of metal parts, such as transmission parts, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating, the surroundings retain a normal temperature. As a result, stuck parts will expand and loosen, rust and sealants dissolve. Also suitable for removing decals and coating layers. No secondary damage!


                                                • BETEX iDUCTOR

                                                • recision heating, the ultimate tool for flameless heating!

                                                  The BETEX iDuctor is a professional type of induction hand tool. All sorts of metal parts, such as transmission parts, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating, the surroundings retain a normal temperature. As a result, stuck parts will expand and loosen. Also suitable for removing decals and coating layers.

                                                  BETEX iDuctor 1 - 1200W

                                                  This is an ideal solution for stuck nuts, bolts, etc., where often a conventional blow torch or grinder is used. Using a blow torch with open flames entails some form of risk and may cause pollution. A grinder can spark and cause damage to the area surrounding the part. Workplaces become safer, cleaner and more efficient with the BETEX iDuctor 1.

                                                  Advantages
                                                  • Ergonomic design
                                                  • Time savings
                                                  • Cost savings
                                                  • Convenient
                                                  • Can be operated with one hand
                                                  • No open fire
                                                  • Safe to use
                                                  • Versatile
                                                  • For hard to reach locations
                                                  • Maintenance free
                                                • BETEX iDuctor 2 - 2300W

                                                • Precision heating, the ultimate tool for flameless heating!

                                                  The BETEX iDuctor is a professional type of induction hand tool. All sorts of metal parts, such as transmission parts, bearing housings, bolts, nuts, pipes and small surfaces can be heated locally. Thanks to the precise heating, the surroundings retain a normal temperature. As a result, stuck parts will expand and loosen. Also suitable for removing decals and coating layers.

                                                  BETEX iDuctor 2 - 2300W

                                                  The only induction hand tool on the market with an output of no less than 2300 Watts. Using the BETEX iDuctor 2 you can heat larger and heavier workpieces even faster. No open flames. Considerable time savings.

                                                  Advantages 

                                                  • Ergonomic design
                                                  • Time savings
                                                  • Cost savings
                                                  • Convenient
                                                  • Can be operated with one hand
                                                  • No open flames
                                                  • Safe to use
                                                  • Versatile
                                                  • Suitable for difficult to access locations
                                                  • Maintenance free
                                              • Induction heaters for bearings up to 200 kg

                                              • With 4.0 technology ... Induction heating is a superior, fast and controlled heating method. It is a safe and environmentally-friendly alternative to traditional heating methods such as ovens, oil baths or blow torches. These methods generate smoke, fumes or oil waste and are hazardous for your personal safety and a healthy working environment. It is common knowledge that a correct mounting method extends the bearing life. Controlled stress-free heating prevents unnecessary damage, while retaining the original bearing lubrication. Ideal for sealed bearings (2RS-ZZ). Bearing manufacturers recommend controlled induction heating as the best practice for bearing mounting.

                                                The new BASIC and SMART 4.0 generation

                                                BASIC: replaces part of the standard BETEX workbench models, which have been updated in terms of design and electronics.

                                                SMART: for optimal control over the heating process. These models have a modern, easy-to-use touchscreen, 2 temperature sensors for double measurement (Delta T), log function, to store or export information. 

                                                  • BETEX BLF 200 - BASIC - heats up to 20kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø

                                                    10 mm

                                                    Max. outside diameter Ø

                                                    240 mm

                                                    Max. width

                                                    120 mm

                                                    Max. weight

                                                    20 kg


                                                    - Portable induction heater

                                                    - Ideal for use in workshopt or on-site 

                                                    • Including 5 yokes, 7, 10, 14, 20, 40 mm
                                                    • Temperature setting upto 150°C / 302°F 
                                                    • Incl. 1 magnetic temperature probe
                                                    • Automatic demagnetization, better than 2A/cm 
                                                    • Keyboard for easy operation
                                                    • Acoustic signal at the end of each heating cycle 
                                                    • Time setting in minutes/seconds
                                                    • Incl. service kit and CE-manual 
                                                    • 3 years warranty on the electronic unit 
                                                    • Including packing material
                                                  • BETEX 24 XLDi - heats up to 10kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø

                                                    --

                                                    Max. outside diameter Ø

                                                    180 mm

                                                    Max. width

                                                    --

                                                    Max. weight

                                                    10 kg

                                                    Very easy to use and is suitable for bearings, gear wheels, couplings with a max. OD of 180mm. 

                                                    Since you need no yokes even odd shaped parts can be heated. Simply place on the surface, place the temperature probe, select temperature and press start. 

                                                    • Lightweight, portable induction heater: 7 kg
                                                    • Max. temperature 150°C
                                                    • Digital display 
                                                    • Incl. magnetic probe
                                                    • No yokes needed
                                                    • Ideal for use in workshop or on-site
                                                    • Robust protective carrying case with shoulderstrap
                                                  • BETEX BLF 201 - BASIC - heats up to 50kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø, vertical/horizontal

                                                    10/65 mm

                                                    Max. outside diameter Ø

                                                    400 mm

                                                    Max. width

                                                    120 mm

                                                    Max. weight

                                                    50 kg


                                                    - Portable induction heater

                                                    - Easy to use

                                                    • Including 3 yokes, 7, 14, 40x50 mm
                                                    • Temperature setting upto 240°C / 464°F 
                                                    • Incl. 1 magnetic temperature probe
                                                    • Automatic demagnetization, better than 2A/cm 
                                                    • Keyboard for easy operation
                                                    • Acoustic signal at the end of each heating cycle 
                                                    • Temperature hold
                                                    • Time setting in minutes/seconds
                                                    • Incl. service kit and CE-manual 
                                                    • 3 years warranty on the electronic unit 
                                                    • Including packing material


                                                  • BETEX BLF 202 - BASIC - heats up to 100kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø, vertical/horizontal

                                                    30/72 mm

                                                    Max. outside diameter Ø

                                                    500 mm

                                                    Max. width

                                                    180 mm

                                                    Max. weight

                                                    100 kg

                                                    -  Benchtop model with swivel arm

                                                    -  Easy to use

                                                    • Including 2 yokes, 20, 50 mm
                                                    • Temperature setting upto 240°C / 464°F 
                                                    • Incl. 1 magnetic temperature probe
                                                    • Automatic demagnetization, better than 2A/cm 
                                                    • Acoustic signal at the end of each heating cycle 
                                                    • Temperature hold
                                                    • Time setting in minutes/seconds
                                                    • Incl. service kit and CE-manual 
                                                    • 3 years warranty on the electronic unit 
                                                    • Including packing material
                                                  • BETEX BLF 203 - BASIC - heats up to 150kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø, vertical/horizontal

                                                    45/110 mm

                                                    Max. outside diameter Ø

                                                    600 mm

                                                    Max. width

                                                    210 mm

                                                    Max. weight

                                                    150 kg


                                                    -  Benchtop model with swivel arm

                                                    -  Easy to use

                                                    • Including 2 yokes 30, 70x80 mm
                                                    • Temperature setting upto 240°C / 464°F 
                                                    • Incl. 1 magnetic temperature probe
                                                    • Automatic demagnetization, better than 2A/cm 
                                                    • Acoustic signal at the end of each heating cycle 
                                                    • Temperature hold
                                                    • Time setting in minutes/seconds
                                                    • Incl. service kit and CE-manual 
                                                    • 3 years warranty on the electronic unit 
                                                    • Including packing material
                                                  • BETEX BLF 204 - BASIC - heats up to 200kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø, vertical/horizontal

                                                    45/110 mm

                                                    Max. outside diameter Ø

                                                    600 mm

                                                    Max. width

                                                    210 mm

                                                    Max. weight

                                                    200 kg

                                                    • Including 2 yokes 30, 70x80 mm
                                                    • Temperature setting upto 240°C / 464°F 
                                                    • Incl. 1 magnetic temperature probe
                                                    • Automatic demagnetization, better than 2A/cm 
                                                    • Acoustic signal at the end of each heating cycle 
                                                    • Temperature hold
                                                    • Time setting in minutes/seconds
                                                    • Incl. service kit and CE-manual 
                                                    • 3 years warranty on the electronic unit 
                                                    • Including packing material
                                                  • BETEX SLF 301 - SMART - heats up to 50kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø, vertical/horizontal

                                                    10/65 mm

                                                    Max. outside diameter Ø

                                                    400 mm

                                                    Max. width

                                                    120 mm

                                                    Max. weight

                                                    50 kg


                                                    The SMARTserie is used when more control over the heating process is needed. These have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)

                                                    • Including 3 yokes, 7, 14, 40x50 mm
                                                    • Temperature setting upto 240°C / 464°F 
                                                    • Incl. 2 magnetic temperature probes for dual temperature sensing
                                                    • Automatic demagnetization, better than 2A/cm 
                                                    • A clear graph shows heating process
                                                    • Acoustic signal at the end of each heating cycle
                                                    • Temperature hold
                                                    • Time setting in minutes/seconds
                                                    • Heats according to preset temperature/time curve
                                                    • Create proof of work
                                                    • Log function to store data or export to a USB-stick
                                                    • Incl. service kit and CE-manual 
                                                    • 3 years warranty on the electronic unit 
                                                    • Including packing material
                                                  • BETEX SLF 302 - SMART - heats up to 100kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø, vertical/horizontal

                                                    30/72 mm

                                                    Max. outside diameter Ø

                                                    500 mm

                                                    Max. width

                                                    180 mm

                                                    Max. weight

                                                    100 kg

                                                    The SMARTserie is used when more control over the heating process is needed. These have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)

                                                    • Including 2 yokes, 20, 50 mm
                                                    • Temperature setting upto 240°C / 464°F 
                                                    • Incl. 2 magnetic temperature probes for dual temperature sensing
                                                    • Automatic demagnetization, better than 2A/cm 
                                                    • A clear graph shows heating process
                                                    • Acoustic signal at the end of each heating cycle
                                                    • Temperature hold
                                                    • Time setting in minutes/seconds
                                                    • Heats according to preset temperature/time curve
                                                    • Create proof of work
                                                    • Log function to store data or export to a USB-stick
                                                    • Incl. service kit and CE-manual 
                                                    • 3 years warranty on the electronic unit 
                                                    • Including packing material
                                                  • BETEX SLF 303 - SMART - heats up to 150kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø, vertical/horizontal

                                                    45/110 mm

                                                    Max. outside diameter Ø

                                                    600 mm

                                                    Max. width

                                                    210 mm

                                                    Max. weight

                                                    150 kg

                                                    The SMARTserie is used when more control over the heating process is needed. These models have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)

                                                    • Including 2 yokes, 30/70x80 mm
                                                    • Temperature setting upto 240°C / 464°F 
                                                    • Incl. 2 magnetic temperature probes for dual temperature sensing
                                                    • Automatic demagnetization, better than 2A/cm 
                                                    • A clear graph shows heating process
                                                    • Acoustic signal at the end of each heating cycle
                                                    • Temperature hold
                                                    • Time setting in minutes/seconds
                                                    • Heats according to preset temperature/time curve
                                                    • Create proof of work
                                                    • Log function to store data or export to a USB-stick
                                                    • Incl. service kit and CE-manual 
                                                    • 3 years warranty on the electronic unit 
                                                    • Including packing material
                                                  • BETEX SLF 304 - SMART - heats up to 200kg

                                                  • Dimensions bearing:

                                                    Min. inside diameter Ø, vertical/horizontal

                                                    45/110 mm

                                                    Max. outside diameter Ø

                                                    600 mm

                                                    Max. width

                                                    210 mm

                                                    Max. weight 

                                                    200 kg


                                                    The SMARTserie is used when more control over the heating process is needed.

                                                    These models have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)

                                                    • Including 2 yokes, 30/70x80 mm
                                                    • Temperature setting upto 240°C / 464°F
                                                    • Incl. 2 magnetic temperature probes for dual temperature sensing ΔT
                                                    • Automatic demagnetization, better than 2A/cm
                                                    • A clear graph shows heating process
                                                    • Acoustic signal at the end of each heating cycle
                                                    • Temperature hold
                                                    • Time setting in minutes/seconds
                                                    • Heats according to preset temperature/time curve
                                                    • Create proof of work
                                                    • Log function to store data or export to a USB-stick
                                                    • Incl. service kit and CE-manual
                                                    • 3 years warranty on the electronic unit
                                                    • Including packing material
                                                • Induction heaters for bearings up to 1600 kg

                                                • Induction heating is a superior, fast and controlled heating method. 

                                                  It is a safe and environmentally friendly alternative for traditional heating methods such as ovens, oil baths or blow torches. These methods cause smoke, fumes or oil waste and are hazardous for personal health and safety.

                                                  Bega induction bearing heaters are versatile and are used for safe  heating of bearings (NU, NJ) gear wheels, bushings, couplings, innerrings, labyrinth rings, train wheels etc. etc. It is common knowledge that a correct mounting method extends bearing life. Controlled induction heating prevents unnecessary damage, and retains original pre-lubrication. Induction heaters are ideal for sealed bearings (2RS-ZZ).

                                                    • BETEX BLF 205 - BASIC - heats up to 400kg

                                                    • Dimensions bearing:

                                                      Min. inside diameter Ø

                                                      30/135 mm

                                                      Max. outside diameter Ø

                                                      850 mm

                                                      Max. width

                                                      320 mm

                                                      Max. weight 

                                                      400 kg

                                                      • Including yoke 80x80x500 mm
                                                      • Temperature setting upto 240°C / 464°F 
                                                      • Incl. 1 magnetic temperature probe
                                                      • Automatic demagnetization, better than 2A/cm 
                                                      • Acoustic signal at the end of each heating cycle 
                                                      • Temperature hold
                                                      • Time setting in minutes/seconds
                                                      • Incl. service kit and CE-manual 
                                                      • 3 years warranty on the electronic unit 
                                                      • Including packing material
                                                    • BETEX BLF 206 - BASIC - heats up to 600kg

                                                    • Dimensions bearing:

                                                      Min. inside diameter Ø

                                                      60/150 mm

                                                      Max. outside diameter Ø

                                                      1050 mm

                                                      Max. width

                                                      400 mm

                                                      Max. weight 

                                                      600 kg

                                                      • Including yoke 90x90x600 mm
                                                      • Temperature setting upto 240°C / 464°F 
                                                      • Incl. 1 magnetic temperature probe
                                                      • Automatic demagnetization, better than 2A/cm 
                                                      • Acoustic signal at the end of each heating cycle 
                                                      • Temperature hold
                                                      • Time setting in minutes/seconds
                                                      • Incl. service kit and CE-manual 
                                                      • 3 years warranty on the electronic unit 
                                                      • Including packing material


                                                    • BETEX BLF 207 - BASIC - heats up to 800kg

                                                    • Dimensions bearing:

                                                      Min. inside diameter Ø

                                                      260/60 mm

                                                      Max. outside diameter Ø

                                                      1150 mm

                                                      Max. width

                                                      430 mm

                                                      Max. weight 

                                                      800 kg

                                                      • Including yoke 100x100x725 mm
                                                      • Temperature setting upto 240°C / 464°F 
                                                      • Incl. 1 magnetic temperature probe
                                                      • Automatic demagnetization, better than 2A/cm 
                                                      • Acoustic signal at the end of each heating cycle 
                                                      • Temperature hold
                                                      • Time setting in minutes/seconds
                                                      • Incl. service kit and CE-manual 
                                                      • 3 years warranty on the electronic unit 
                                                      • Including packing material
                                                    • BETEX BLF 208 - BASIC - heats up to 1600kg

                                                    • Dimensions bearing:

                                                      Min. inside diameter Ø

                                                      330/90 mm

                                                      Max. outside diameter Ø

                                                      1700 mm

                                                      Max. width

                                                      710 mm

                                                      Max. weight 

                                                      1600 kg

                                                      • Including yoke 150x150x1140 mm
                                                      • Temperature setting upto 240°C / 464°F 
                                                      • Incl. 1 magnetic temperature probe
                                                      • Automatic demagnetization, better than 2A/cm 
                                                      • Acoustic signal at the end of each heating cycle 
                                                      • Temperature hold
                                                      • Time setting in minutes/seconds
                                                      • Incl. service kit and CE-manual 
                                                      • 3 years warranty on the electronic unit 
                                                      • Including packing material
                                                    • BETEX SLF 305 - SMART - heats up to 400kg

                                                    • Dimensions bearing:

                                                      Min. inside diameter Ø

                                                      30/135 mm

                                                      Max. outside diameter Ø

                                                      850 mm

                                                      Max. width

                                                      320 mm

                                                      Max. weight 

                                                      400 kg


                                                      The SMARTserie is used when more control over the heating process is needed. These models have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)
                                                      • Including yoke 80x80x500 mm
                                                      • Temperature setting upto 240°C / 464°F
                                                      • Incl. 2 magnetic temperature probes for dual temperature sensing ΔT
                                                      • Automatic demagnetization, better than 2A/cm
                                                      • A clear graph shows heating process
                                                      • Acoustic signal at the end of each heating cycle
                                                      • Temperature hold
                                                      • Time setting in minutes/seconds
                                                      • Heats according to preset temperature/time curve
                                                      • Create proof of work
                                                      • Log function to store data or export to a USB-stick
                                                      • Incl. service kit and CE-manual
                                                      • 3 years warranty on the electronic unit
                                                      • Including packing material
                                                    • BETEX SLF 306 - SMART - heats up to 600kg

                                                    • Dimensions bearing:

                                                      Min. inside diameter Ø

                                                      60/150 mm

                                                      Max. outside diameter Ø

                                                      1050 mm

                                                      Max. width

                                                      400 mm

                                                      Max. weight 

                                                      600 kg


                                                      The SMARTserie is used when more control over the heating process is needed. These models have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)
                                                      • Including yoke 90x90x60 mm
                                                      • Temperature setting upto 240°C / 464°F
                                                      • Incl. 2 magnetic temperature probes for dual temperature sensing ΔT
                                                      • Automatic demagnetization, better than 2A/cm
                                                      • A clear graph shows heating process
                                                      • Acoustic signal at the end of each heating cycle
                                                      • Temperature hold
                                                      • Time setting in minutes/seconds
                                                      • Heats according to preset temperature/time curve
                                                      • Create proof of work
                                                      • Log function to store data or export to a USB-stick
                                                      • Incl. service kit and CE-manual
                                                      • 3 years warranty on the electronic unit
                                                      • Including packing material
                                                    • BETEX SLF 307 - SMART - heats up to 800kg

                                                    • Dimensions bearing:

                                                      Min. inside diameter Ø

                                                      260/60 mm

                                                      Max. outside diameter Ø

                                                      1150 mm

                                                      Max. width

                                                      430 mm

                                                      Max. weight 

                                                      800 kg

                                                      The SMARTserie is used when more control over the heating process is needed. These models have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)
                                                      • Including yoke 100x100x725 mm
                                                      • Temperature setting upto 240°C / 464°F
                                                      • Incl. 2 magnetic temperature probes for dual temperature sensing ΔT
                                                      • Automatic demagnetization, better than 2A/cm
                                                      • A clear graph shows heating process
                                                      • Acoustic signal at the end of each heating cycle
                                                      • Temperature hold
                                                      • Time setting in minutes/seconds
                                                      • Heats according to preset temperature/time curve
                                                      • Create proof of work
                                                      • Log function to store data or export to a USB-stick
                                                      • Incl. service kit and CE-manual
                                                      • 3 years warranty on the electronic unit
                                                      • Including packing material
                                                    • BETEX SLF 308 - SMART - heats up to 1600kg

                                                    • Dimensions bearing:

                                                      Min. inside diameter Ø

                                                      330/90 mm

                                                      Max. outside diameter Ø

                                                      1700 mm

                                                      Max. width

                                                      710 mm

                                                      Max. weight 

                                                      1600 kg


                                                      The SMARTserie is used when more control over the heating process is needed. These models have a modern easy-to-use touchscreen and 2 temperature probes for dual temperature sensing (Delta T)
                                                      • Including yoke 150x150x1140 mm
                                                      • Temperature setting upto 240°C / 464°F
                                                      • Incl. 2 magnetic temperature probes for dual temperature sensing ΔT
                                                      • Automatic demagnetization, better than 2A/cm
                                                      • A clear graph shows heating process
                                                      • Acoustic signal at the end of each heating cycle
                                                      • Temperature hold
                                                      • Time setting in minutes/seconds
                                                      • Heats according to preset temperature/time curve
                                                      • Create proof of work
                                                      • Log function to store data or export to a USB-stick
                                                      • Incl. service kit and CE-manual
                                                      • 3 years warranty on the electronic unit
                                                      • Including packing material
                                                  • Middle frequency generators

                                                  • Mounting, dismounting, pre-heating. All of that is possible with the BETEX MF Quick-Heaters 
                                                    Thanks to mid-frequency technology, energy is transferred to the workpiece effectively, heating it easily and fast. The MF Quick-Heater consists of a generator with a fixed or flexible inductor. The compact dimensions make it easy to move. MF Quick-Heaters save time because they can be used quickly (fewer actions) and heat faster than conventional methods. One of the major advantages of this type of induction heater is that they are not limited to cylindrical shaped components: flexible inductors can be wrapped around any size or shape. Since the frequency is relatively high, the penetration depth of the magnetic field is not too large, so that only the outer layer of the workpiece is heated. This principle makes heating using medium-frequency particularly suitable for dismantling purposes, such as removing bearing rings from shafts. 

                                                    Advantages of BETEX MF Quick-Heaters 
                                                    • For mounting, dismounting and preheating 
                                                    • Suitable for steel, cast iron, stainless steel and titanium 
                                                    • Temperature and/or time controlled heating 
                                                    • Double temperature measurement (ΔT monitoring) 
                                                    • Low connection power (32/63 Amp) 
                                                    • Generators are adjustable from 2.5 to 22/44 kW 
                                                    • Easy to use and flexible 
                                                    • Suitable for production and maintenance applications 
                                                    • No residual magnetism 
                                                    • No fire hazard due to open flames 
                                                    • No noise, fumes or smoke nuisance 
                                                    • Air-cooled: no water cooling needed 
                                                    • Because the work is carried out damage-free, expensive components can be reused 
                                                      • MF-GENERATOR 2.5 - 22kW

                                                      • The smart and eco-friendly way of heating - for dismounting and mounting of all sorts of transmission components
                                                        • Safe, energy efficient operation (no oil or gas)
                                                        • Compact design with digital 3.5" display
                                                        • Smart electronics ensure optimal operating frequency
                                                        • Adjustable power control
                                                        • Dual temperature sensing (monitoring ΔT)
                                                        • Temperature- or time controlled heating: Demand is constantly monitored. Once the preset temperature or time has been reached, the device will switch off automatically.

                                                        Application examples:
                                                        • Dismounting of bearings, inner rings (NU, NJ), labyrinth rings and -seals (e.g. railway, metro)
                                                        • Mounting and dismounting of bearings, sleeves, bearing houses and power transmissions components
                                                        • Mounting of machine parts, like large gears, bearing houses, couplings (e.g. steel plants; wind power, papermills)


                                                         

                                                      • MF-GENERATOR 2.5 - 10kW

                                                      • The smart and eco-friendly way of heating - for dismounting and mounting of all sorts of transmission components

                                                        • This new 10kW generator is available in various voltages
                                                        • Safe, energy efficient operation (no oil or gas)
                                                        • Compact design with digital display
                                                        • Smart electronics ensure optimal operating frequency
                                                        • Adjustable power control
                                                        • Dual temperature sensing (monitoring ?T)
                                                        • Temperature- or time controlled heating: Demand is constantly monitored. Once the preset temperature or time has been reached, the device will switch off automatically.

                                                        Application examples:

                                                        • Dismounting of bearings, inner rings (NU, NJ), labyrinth rings and -seals (e.g. railway, metro) 
                                                        • Mounting and dismounting of bearings, sleeves, bearing houses and power transmissions components
                                                        • Mounting of machine parts, like large gears, bearing houses, couplings (e.g. steel plants; wind power, papermills)
                                                      • MF-GENERATOR 2.5 - 44kW

                                                      • The smart and eco-friendly way of heating - for dismounting and mounting of all sorts of transmission components
                                                        • Safe, energy efficient operation (no oil or gas)
                                                        • Compact design with digital 3.5" display
                                                        • Smart electronics ensure optimal operating frequency
                                                        • Adjustable power control
                                                        • Dual temperature sensing (monitoring ΔT)
                                                        • Temperature- or time controlled heating: Demand is constantly monitored. Once the preset temperature or time has been reached, the device will switch off automatically.

                                                        Application examples:
                                                        • Dismounting of bearings, inner rings (NU, NJ), labyrinth rings and -seals (e.g. railway, metro)
                                                        • Mounting and dismounting of bearings, sleeves, bearing houses and power transmissions components
                                                        • Mounting of machine parts, like large gears, bearing houses, couplings (e.g. steel plants; wind power, papermills)


                                                         

                                                      • MF-GENERATOR 3.0 - 10kW

                                                      • The smart and eco-friendly way of heating - for dismounting and mounting of all sorts of transmission components

                                                        • This new 10kW generator is available in various voltages
                                                        • Safe, energy efficient operation (no oil or gas)
                                                        • Compact design with digital display
                                                        • Smart electronics ensure optimal operating frequency
                                                        • Adjustable power control
                                                        • Dual temperature sensing (monitoring ΔT)
                                                        • Temperature- or time controlled heating: Demand is constantly monitored. Once the preset temperature or time has been reached, the device will switch off automatically.

                                                        Application examples:

                                                        • Dismounting of bearings, inner rings (NU, NJ), labyrinth rings and -seals (e.g. railway, metro) 
                                                        • Mounting and dismounting of bearings, sleeves, bearing houses and power transmissions components
                                                        • Mounting of machine parts, like large gears, bearing houses, couplings (e.g. steel plants; wind power, papermills)

                                                         
                                                      • MF-GENERATOR 3.0 - 22kW

                                                        • Compact design with large 7" display
                                                        • Heats according to preset temperature/time curve
                                                        • Shows temperature development in chart form
                                                        • Option of logging the heating cycle
                                                        • Log function to store data or export to a USB-stick
                                                        • Smart electronics ensure optimal operating frequency
                                                        • Adjustable power control
                                                        • Advises user on optimal heating (more/fewer windings)
                                                        • Dual temperature sensing (monitoring ΔT)
                                                        • Option to operate several heaters together
                                                      • MF-GENERATOR 3.0 - 44kW

                                                        • ompact design with large 7" display
                                                        • Heats according to preset temperature/time curve
                                                        • Shows temperature development in chart form
                                                        • Option of logging the heating cycle
                                                        • Log function to store data or export to a USB-stick
                                                        • Smart electronics ensure optimal operating frequency
                                                        • Adjustable power control
                                                        • Advises user on optimal heating (more/fewer windings)
                                                        • Dual temperature sensing (monitoring ΔT)
                                                        • Option to operate several heaters together

                                                         
                                                      • MF flexible conductors

                                                      • Flexible inductors are a multifunctional solution for various shapes or sizes. They can be used in or around a workpiece or both.
                                                         
                                                      • BETEX MF Fixed inductors

                                                      • Fixed inductors for removing, labyrinth rings, sleeves, etc.. Fixed inductors are used for serial work

                                                        SMART inductor recognition

                                                        When a fixed inductor is connected to the generator for a second time, it will automatically select the correct settings. All you have to do is press START. 

                                                        Which inductor?

                                                        For tension free heating we offer fixed or flexible inductors. This depends on work piece application.

                                                        Request our product questionnaire for proper advice.

                                                      • MF-GENERATOR 3.0 - 3.5kW

                                                        • Portable induction heater, weighs only 7,85 kg, ideal for working on site
                                                        • Easy to connect to mains voltage (230V)
                                                        • Easy operation with 4,3" touchscreen
                                                        • Smart electronics ensure optimal operating frequency
                                                        • Dual temperature sensing (monitoring Delta T)
                                                        • Choice of flexible inductors: 5m, 7,5m, 10m
                                                        • Can heat according to preset temperature/time curve
                                                        • The heating process is displayed in a clear graph
                                                        • Create proof of work report
                                                        • Log function to save data or export it via a USB port

                                                        Min. winding diameter flexible inductors 3.5 kW

                                                        • Length: 5/7.5/10 m
                                                        • Max. temperature 180°C/356°F
                                                        • Diameter cable: Ø 12 mm
                                                        • Min. winding diameter: ca. 90 mm
                                                    • Electric bearing heaters

                                                    • Bega Special Tools is introducing a new model industrial bearing heater, specifically for the small workshop. The "BETEX Cone Heater CH" is a simple heater for heating bearings and other drive components. The reason Bega developed it was because of the increasing demand for a small type, affordable alternative to larger existing (BETEX) induction heaters.

                                                      Bearing assembly using heat and shrink fitting is still the safe alternative for hammers, gas burners or oil baths. Correct mounting is essential to maximize the bearing life cycle. The BETEX Cone Heater is a relatively inexpensive and very user-friendly heater, suitable for different diameters. A great solution for small workshops.

                                                        • BETEX CONE HEATER, CHU series, Uncontrolled temperature

                                                        • For heating bearings, enabling easy mounting by means of shrink fitting.

                                                          A correct mounting method extends bearing life. Electric heating is a safe alternative to traditional methods such as hammering, oil baths or even blow torches!

                                                          Also suitable for heating gears, bushes, cogwheels, couplings and other round metal workpieces.

                                                          The affordable alternative!

                                                          If your budget is limited then the BETEX Cone Heater is an affordable alternative to other heating systems. It is easy to use and suitable for a variety of sizes. The aluminium body is light weight and ensures fast, even heating.

                                                          Advantages CHU:

                                                          • Easy-to-use, just plug in and switch on
                                                          • Light weight, easy to move around
                                                          • Reliable & flexible
                                                          • Safe & clean operation
                                                        • BETEX CONE HEATER, CHC series Controlled temperature

                                                        • For heating bearings, enabling easy mounting by means of shrink fitting.

                                                          A correct mounting method extends bearing life. Electric heating is a safe alternative to traditional methods such as hammering, oil baths or even blow torches!

                                                          Also suitable for heating gears, bushes, cogwheels, couplings and other round metal workpieces.

                                                          The affordable alternative!

                                                          If your budget is limited then the BETEX Cone Heater is an affordable alternative to other heating systems. It is easy to use and suitable for a variety of sizes. The aluminium body is light weight and ensures fast even heating.

                                                          Advantages CHC:

                                                          • With preset temperature 120°C / 248°F
                                                          • With temperature hold: the unit will keep the bearing at preset temperature.
                                                          • Easy-to-use, just plug in and switch on
                                                          • Light weight, easy to move around
                                                          • Reliable & flexible
                                                          • Safe & clean operation
                                                      • Bearing fitting tool sets

                                                      • Fitting tool set

                                                        Cold mounting, or mechanical mounting for small and medium sized bearings. For safe, precise and quick mounting of bearings, bushings, sealing rings etc., the Impact fitting tool set is an absolute must-have.

                                                        Specially for bearings it is important that during mechanical mounting the bearing is supported on its inner and outer ring in order to avoid unnecessary damage and premature failure.

                                                        Your benefits:

                                                        • Quick, precise and safe mounting
                                                        • No more damage to shafts, bearing houses or sealing rings
                                                        • Extended life cycle of bearings
                                                        • The impact resistant plastic collets are made of unbreakable sheet material, contrary to easily breaking injection moulded collets.
                                                        • The collet numbers are clearly engraved and marked, to avoid mistakes.
                                                          • BETEX IMPACT 33

                                                          • FITTING TOOLSET IMPACT 33

                                                            This fitting tool set has been specially designed for quick, accurate and safe mounting of bearings with a bore varying from 10 to 50 mm.
                                                            Impact can also be used to mount bushings, sealing rings etc.

                                                            The set IMPACT 33 consists of :
                                                            • 33 rings
                                                            • 3 impact sleeves (alu)
                                                            • dead-blow hammer
                                                            • carrying case
                                                            • for bore 10 to 50mm and O.D. 26 - 110mm
                                                            • suitable for 375 different bearings
                                                            • weight: 4,8 kg
                                                          • BETEX IMPACT 39

                                                          • FITTING TOOLSET IMPACT 39

                                                            This fitting tool set has been specially designed for quick, accurate and safe mounting of bearings with a bore varying from 10 to 60 mm.
                                                            Impact can also be used to mount bushings, sealing rings etc.

                                                            The set IMPACT 39 consist of:
                                                            • 39 rings in combination with
                                                            • 4 impact sleeves (alu)
                                                            • dead-blow hammer
                                                            • carrying case
                                                            • for bore 10 to 60mm and O.D. 26 - 130mm
                                                            • suitable for 600 different bearings
                                                            • weight: 6,5 kg
                                                        • Checking and Alignment

                                                            • Shims

                                                                • BETEX SHIMS IN CARRYING CASE

                                                                • BETEX Shims - Solid stainless steel shims (Material AISI 304, DIN 1.4301) in handy carrying cases

                                                                  Betex shims can also be supplied in handy carrying cases. These cases contain shims in a maximum of 11 different thicknesses. The storage compartments are suitable for shims of 0.025 - 3.0 mm thick. To refill the cases, the Betex Shims are supplied in packs of 10 pieces. Bega Special Tools has a large number of pre-sorted cases in stock. Prices are per piece. Packing contains 10 shims per set.
                                                                • SOLID SHIMS - Stainless Steel

                                                                • The benefits of solid shims:

                                                                  The benefits solid stainless steel (AISI-304) shims :
                                                                  • Available in 6 sizes in 11 thicknesses.
                                                                  • Packed per 10 pieces
                                                                  • High-quality non-corrosive material
                                                                  • The thicknesses of these shims are etched on each shim
                                                                  • 31 standard combinations in handy cases
                                                                  • Suitable for reuse.

                                                                  The benefits peel-off hard brass shims:
                                                                  • The peel-off shims are 1 mm thick and are available in 5 sizes. They consist of 12 peel-off layers (8x0.1 mm and 4x0.05 mm).
                                                                  • They always fit! Simply peel-off until the right thickness is obtained
                                                                • Peell-off Shims Brass, Stainless steel

                                                                • Laminated pre-cut peel-off shims.
                                                                  • Made of high-quality hard brass or stainless steel to prevent corrosion.
                                                                  • Available in 6 sizes; 12 peel-off layers (8 x 0.1 mm and 4 x 0.05 mm).
                                                                  • Burr-free with specially rounded corners.
                                                                  • They always fit! Simply peel off until the right thickness is obtained.

                                                                  Prices are per piece.
                                                                  Packing contains 10 shims per set.
                                                              • Shaft alignment computers

                                                                  • LASER KIT LASER SHAFT ALIGNMENT

                                                                  • Fixturlaser LASER KIT Shaft alignment system

                                                                    The Laser Kit consists of two wireless sensor units utilizing two line lasers. The use of line lasers simplifies the setup process minimizing setup time. To make it even easier the sensors comes pre-mounted on its fixtures and pre-set to the most common setup.

                                                                    The software runs on a tablet, or phone, guiding the user through the entire alignment process. The user interface is entirely graphical and uses no text, no language barriers to overcome. The software leaves you without any doubt how your machine is aligned and when your job is completed. Reporting is automatic and contains all relevant information.

                                                                    Advantages:

                                                                    • Adaptive User Interface
                                                                    • VertiZontal Moves
                                                                    • Pre-mounted sensors
                                                                    • Auto Connection via Bluetooth
                                                                  • Easy-Laser XT440

                                                                  • Easy-Laser XT440 Shaft-alignment

                                                                    Thanks to groundbreaking cross-platform technology, XT440 lets you display data on a multitude of different handheld devices, giving you the freedom to work with the gear that suits you and your company the best. To make this new generation as straightforward as possible we have included all XT measurement programs in a user-friendly application you can download for free.
                                                                    • Can align both horizontally and vertically!
                                                                    • Display data on multiple platforms
                                                                    • One free ap - no license needed
                                                                    • Rugged design. Long operating times (16 hours)
                                                                    • With or without the robust and user-friendly display unit XT11
                                                                  • Fixturlaser ECO

                                                                  • Fixturlaser ECO - Shaft alignment system

                                                                    Fixturlaser ECO makes professional alignment equipment available to everyone because of its price / quality ratio. The 20 mm detectors and the user-friendly user interface ensure that alignment can be carried out in any situation.

                                                                    Advantages:

                                                                    • Integrated Bluetooth
                                                                    • Pre-mounted sensors
                                                                    • 4"colour display
                                                                    • VertiZontal Moves, innovative and time-saving features
                                                                    • Screen flip
                                                                    • 8 hours battery time, rechargeable, continous use
                                                                    • CCD sensors technology
                                                                    • Live values during adjustment
                                                                    • IP65 classified (resists harsh environments)
                                                                    • Slim wireless sensor units
                                                                  • Fixturlaser EVO

                                                                  • Fixturlaser EVO - Shaft alignment system

                                                                    The EVO is all about evolved simplicity and user friendliness. The color coded graphic user interface that helps the maintenance professionsal throughout the alignment process. The EVO offers an extensive shaft alighnment package, including the Feetlock function that is useful in base/bolt-bount machine situations.

                                                                    Benefits:
                                                                    • Integrated Bluetooth
                                                                    • 5" compact colour display
                                                                    • VertiZontal Moves, innovative and time-saving features
                                                                    • Screen flip
                                                                    • CCD sensors technology
                                                                    • True position sensing (TPS)
                                                                    • Live values during adjustment
                                                                    • Compact sensor units (33 mm thick)
                                                                    • 8 hours battery time, continuous use
                                                                  • Fixturlaser NXA Pro

                                                                  • Fixturlaser NXA Pro - Shaft alignment system

                                                                    A revolution in shaft alignment as well as a revolution in usability with the Fixturlaser NXA Pro - a digital laser based shaft alignment system! The Fixturlaser NXA Pro aims to provide the user with a fast and simple operation, as well as having access to advanced functions and capabilities, such as the OmniView and the VertiZontal Moves, and probably the best power management system in the market place

                                                                    Advantages:
                                                                    • Omniview: 6,5" transreflective display with icons and symbols to guide, no text involved
                                                                    • - Gyroscope
                                                                    • - VertiZontal Moves, Measure Once, Move in 2 Directions
                                                                    • - Integrated Bluetooth
                                                                    • - Power management system, 10 hours continuous battery operating time and express charge display
                                                                    • - Display unit: 8 hours battery time, continuous use. Sensorunit: min. 24 hours
                                                                    • - CCD sensor technology
                                                                    • - Live values during adjustment
                                                                    • - IP65 classified (Dust tight and protected against water jets)
                                                                    • - Very compact sensor units 33,5 mm in width, they fit in the tightest spots
                                                                • Pulley alignment computers

                                                                    • Schaeffler LASER-SMARTY3

                                                                    • The LASER-SMARTY3 is an extremely affordable and universally applicable disc and pulley alignment system for the alignment of V-belts, toothed belts, flat belts and chain drives.


                                                                      The LASER-SMARTY3 is applicable to both magnetic and non-magnetic discs. It has two magnetic aligning blocks with offset control to allow, if necessary, thickness differences of the pulley discs. This allows you to measure the parallel and angular errors between both pulleys directly in relation to the belt position in the groove. The magnetic straighteners and device can be mounted within seconds. A visible laser appears on the target blocks. If the laser line shines exactly through the slots of the target blocks, the discs are aligned. The result is a fast and accurate alignment.

                                                                      • Displays parallel error and angular error between pulley discs.
                                                                      • Works faster and more accurately.
                                                                      • For both horizontal- and vertical-mounted machines.
                                                                      • Can also be used with non-ferrous discs.
                                                                      • Can be operated by 1 person.
                                                                      • Operating range up to 0.04 - 3 meter. (LOW power mode)
                                                                      • Operating range up to 0.5 - 10 meter. (HIGH power mode)
                                                                    • Fixturlaser PAT

                                                                    • The PAT pulley alignment laser is the definitive solution for all your pulley alignment jobs!

                                                                      Because the belts' grooves are used as reference points, you can see instantly whether the pulleys are correctly aligned or not.

                                                                      The PAT is supplied with two spring-loaded laser units that can be mounted in the pulley groovesThe PAT also has standard tapers allowing the lasers to be mounted on most standard gauges.(A-E 6 mm - 40 mm) 

                                                                      The use of two laser units makes it very easy for the user to determine the adjustment required, e.g. whether to correct a parallel error or an angular error.

                                                                      You can see in no time whether your pulleys are correctly aligned. Alignment is just as easy as mounting the laser units. Simply switch on the lasers and view the laser unit on the other pulley.        

                                                                      The laser projects a line on the upper surface of the opposing laser unit, mounted on the 'target' as shown to the left. If required, the machine can be aligned in such a way that the laser on both units hits the 'target'.

                                                                    • Easy-Laser XT190

                                                                    • Easy-Laser XT190 Pulley/belt Alignment

                                                                      D90 BTA is compact and light. Suitable for most types of drive, such as V-belt, timing belt, flat belt and chain drives.

                                                                      Wireless and digital system for precise and efficient alignment of sheaves/pulleys, belts, bearings and seals.

                                                                      The advantages:

                                                                      • Adjustment values are always displayed live
                                                                      • Alignment can be made by one operator
                                                                      • Suitable for magnetic or non-magnetic sheaves of all sizes
                                                                      • Display data on multiple platforms
                                                                      • One free app - no license needed
                                                                      • Unique documentation possibilities
                                                                  • MonitoringTools

                                                                      • BETEX Industrial thermometers

                                                                      • BETEX 1240 infrared thermometer upto 800°C

                                                                        • Contactless measurement -40°C upto 800°C
                                                                        • MIN /MAX function
                                                                        • Backlit display
                                                                        • Optical resolution 12:1
                                                                        • Average- and differential reading
                                                                        • Alarm function
                                                                        • Dimensions: 95 x 83 x 192 mm
                                                                        • Weight: 250 gr.
                                                                        • Incl. fastening hook and battery
                                                                        • Incl. manual
                                                                      • BETEX TACHOMETER

                                                                      • 610280 - BETEX 1600 Digital laser/mechanical tachometer

                                                                        BETEX 1600 handheld tachometer
                                                                        • Speed measurement: rpm
                                                                        • Surface velocity: m/min
                                                                        • Number of rotations: counter
                                                                        • Frequency: m, in, ft, yd
                                                                        • Linear measurement: m, in, ft, yd
                                                                        • ABS plastic
                                                                        • Easy operation
                                                                        • With connection for network adapter 6
                                                                        • Digital lighted display
                                                                        • Adapters for mechanical measurements
                                                                        • Measurement: 160 x 60 x 42 mm
                                                                        • Weight: 200 g.
                                                                      • BETEX DECIBEL METERS

                                                                      • 610270 - BETEX 1500 professional digital sound level meter

                                                                        BETEX 1500 sound level meter / decibel meter
                                                                        • Extreme value measurement
                                                                        • High precision
                                                                        • Fast volume measurements
                                                                        • Backlit colour LCD
                                                                        • Simultaneous temperature measurement
                                                                        • HOLD function
                                                                        • Large frequency range
                                                                        • A-frequency weighting
                                                                        • Robust ABS plastic housing
                                                                        • 1/2" electret condenser microphone
                                                                        • Slow/fast time rating
                                                                        • Alarm at frequency exceeded
                                                                        • Resolution 0.1dB
                                                                        • Display update every 300 ms
                                                                        • Measurement: 144 x 56 x 30.5 mm
                                                                        • Weight: 73 g.
                                                                        • Incl. wind noise suppressor
                                                                        • Incl. batteries and manual
                                                                      • BETEX DECIBEL METERS

                                                                      • 610320 - Electronic stethoscope

                                                                        BETEX ELS 12 BETEX ELS12 ELECTRONIC STETHOSCOPE SET
                                                                        For preventive system maintenance with stethoscope. Listening to machine sounds in order to determine the probable source of abnormal noise. Applications include checking the operational status of valves, injectors, electric relays, pumps, lubrication systems, shafts, drivetrains and bearings.

                                                                        Complete kit:
                                                                        • Measuremet range: 30 - 100 dB low / 60-130dB high
                                                                        • Hold-function and interval measurements
                                                                        • Frequency range: 31.5 Hz - 8000 Hz
                                                                        • Resolution: 0.1 dB
                                                                        • Weight: 270 Gr
                                                                      • BETEX Endoscope

                                                                      • BETEX Endoscope, electronic videoscope

                                                                        User-friendly videoscope suitable for detection, investigation and preventive maintenance.

                                                                        • Provides access to areas that are difficult to access by using the 360 degree movable tip, which is equipped with LED lighting.
                                                                        • Probe is suitable for the toughest conditions, with a double insulation structure it is waterproof, oil-corrosion resistant.
                                                                        • Easy to connect to a large screen via HDMI, so that external staff can properly assess the test results.
                                                                        • The endoscope is equipped with a magnetic handle.
                                                                        • Easy to operate with 1 hand and easy to understand menu navigation
                                                                      • BETEX VibChecker Vibration meter

                                                                      • BETEX VIB CHECKER

                                                                        Vibration monitoring is a cost-effective predicitive maintenance tool. In most cases, vibration measurement can detect a problem long before damage to the machine is done. The repair of equipment failing while in service is many times costlier than planned repairs made possible through vibration monitoring.

                                                                        Use your VibChecker to verify that unhealthy vibration levels have not been introduced after:
                                                                        • Replacement of parts
                                                                        • Overhauls
                                                                        • Repairs
                                                                        • Lubrication, etc.
                                                                        • Vibration measurement is also advisable whenever a machine is making excessive noise, shaking or generating heat.

                                                                        VibChecker immediately tells you the vibration severity level. Readings are automatically evaluated against standards ISO 2372 or ISO 10816. The result is instantly presented with green - yellow - red LEDs.
                                                                      • BETEX BEARING CHECKER

                                                                      • BEARING CHECKER

                                                                        Bearing Checker is unique, being the first portable, pocketsize instrument (weight 185 g, size 158 x 62 x 30 mm) for evaluated shock pulse measurement. Besides shock pulses, Bearing Checker measures machine surface temperature with infrared light, and can also be used as an electronic stethoscope for listening to machine sounds.

                                                                        The instrument can be used on most rotating machinery, such as electric motors, fans and pumps, in a diversety of industrial environments.

                                                                        Machine breakdowns are frequently caused by bearing damage. Timely failure prediction and detection is key to improving equipment and component reliability and cutting operating costs.
                                                                        Unplanned downtime, as well as unnecessary repair work, can be significantly reduced by periodically checking bearing condition.
                                                                         
                                                                    • Lubrication

                                                                    • perma prevents up to 55 % of roller bearing failures

                                                                      • A constant renewal of the lubricating film ensures equipment availability
                                                                      • Reliable, clean and precise lubrication around the clock
                                                                      • Discharge periods from 1 - 24 months
                                                                      • Lubricant volume 60 cm3 up to 7.000 cm3
                                                                      • Operating temperature from -20 °C to +60 °C

                                                                      perma reduces costs by up to 25 %

                                                                      • Continuous production processes and predictable maintenance intervals
                                                                      • Continuous, low maintenance, long-term lubrication
                                                                      • Permanent supply of lube-points with fresh lubricant
                                                                      • Consistently high lubricant quality guarantees
                                                                      • high equipment availability
                                                                      • Energy cost reduction

                                                                      Industries around the world rely on automatic lubrication systems from perma

                                                                      perma-tec has been providing innovative and creative lubrication solutions for almost 50 years. Our single- and multi-point lubrication systems can be found in almost all types of industries and applications around the world.
                                                                      perma-tec’s leadership in single-point lubrication is based on many patents and certifications. All perma products are developed, tested and manufactured in the company’s German headquarters and live up to the "Made in Germany" quality standard.
                                                                        • Perma

                                                                        • perma® Automatic lubricators offers exceptional solutions for hard-to-reach places, extreme conditions such as high / low temperatures, high loads, dust and dirt. Perma-tec is a European product, with European certifications and actively contributes to YOUR work safety.

                                                                          perma prevents up to 55 % of roller bearing failures

                                                                          • Reliable, clean and precise lubrication around the clock
                                                                          • Discharge periods from 1 - 24 months
                                                                          • Operating temperature from -20 °C to +60 °C

                                                                          perma reduces costs by up to 25 %

                                                                          • Continuous, low maintenance, long-term lubrication
                                                                          • Permanent supply of lube-points with fresh lubricant

                                                                          Bega is Preferred Distributor: Bega Special Tools is Perma-tec's largest stockholding Distributor in Europe! Perma-tec GmbH & Co.KG has been working with Bega for more than 25 years. Bega employees are regularly trained in Germany and the Netherlands to follow the latest developments in both lubrication and applications.

                                                                            • PERMA CLASSIC

                                                                            • Electrochemical Lubrication Systems

                                                                              Perma CLASSIC is used for single-pointlubrication of roller- and sliding bearings, chains, open gears, guideways, and other system components.
                                                                              Applications can be found in mining, steel- and the automotive industry, as well as in mechanical engineering.


                                                                              Your advantages:
                                                                              • Improved safety and lower costs than manual lubrication
                                                                              • Controlled and consistent lubrication, small amounts in short intervals
                                                                              • Constant supply of fresh lubricant to bearing seals under high contamination conditions
                                                                              • No external power supply necessary 4 different discharge periods possible (120cc in 1, 3, 6, or 12 months)
                                                                              • Reliable supply of lubricant
                                                                              • Lubricant quality in the lubrication point is kept at a high level
                                                                              • Transparent discharge indicator cap shows when the unit is empty
                                                                              • Can be mounted up to 1 m away from the lubrication point with a flexible tube
                                                                              • Simple exchange by hand, no tools necessary
                                                                              • Can be used in Ex-proof areas
                                                                            • PERMA FUTURA

                                                                            • Perma FUTURA is used for single-point lubrication of roller- and sliding bearings, chains, open gears, guide-ways, and other components.
                                                                              This lubrication system is ideal for use in areas that must be kept hygienically clean (e. g. food industry) and in environments which are highly corrosive.


                                                                              Your advantages:
                                                                              • Improved safety and lower costs than manual lubrication
                                                                              • Controlled and consistent lubrication, small amounts in short intervals
                                                                              • Constant supply of fresh lubricant to bearing seals under high contamination conditions
                                                                              • No external power supply necessary
                                                                              • 4 different discharge periods possible (100cc in 1, 3, 6, or 12 months)
                                                                              • Reliable supply of lubricant
                                                                              • Lubricant quality in the lubrication point is kept at a high level
                                                                              • Visible control of remaining lubricant via transparent housing
                                                                              • Can be mounted up to 1 m away from the lubrication point with a flexible tube
                                                                              • Simple exchange by hand, no tools necessary
                                                                              • Can be used in Ex-proof areas
                                                                            • PERMA FLEX

                                                                            • The original system for 24 hours for continuous operation

                                                                              Flexible use – even for challenging lubrication points
                                                                              The automatic lubrication system perma FLEX is available in two convenient sizes (60 cm³ / 125 cm³). It can be used for inside or outside applications at temperatures ranging from -20 °C to +60 °C. Discharge period setting is flexible and can be adjusted from 1 – 12 months using the dial on top of the lubricator. perma FLEX comes fully assembled and ready-to-use. Simply turn the dial to the desired discharge period and the system is activated. The electronically controlled chemical reaction will build up the pressure that is necessary to continually supply the lubrication point with fresh lubricant.

                                                                              Adjustable discharge period 1 – 12 months
                                                                              Can be adjusted and switched off even after activation.
                                                                              Your benefit: Less maintenance costs due to longer equipment service life and increased equipment availability.

                                                                              User friendly all-in-one system
                                                                              perma FLEX comes fully assembled and can be activated quickly and easily without tools.
                                                                              Your benefit: No difficult, time consuming assembly, no special tools required. Just unpack, turn switch and the system is ready.

                                                                              Temperature flexibility from -20 °C up to 60 °C
                                                                              For use in hot and cold areas and applications with changing temperatures.
                                                                              Your benefit: You need only one system for a variety of applications
                                                                            • PERMA NOVA


                                                                              • The fist temperature independent electrochemical lubrication system
                                                                              • Discharge period 12 months
                                                                              • Electrochemical reaction via gas generation cell
                                                                              • Wide temperature range: -20 tot +60°C
                                                                              • LCD display with push button control
                                                                              • Control unit can be reused several times
                                                                              • Dust-tight and protected against water jets
                                                                              • Pressure build-up max. 6 bar
                                                                              • 65 & 130cc lubricant volume
                                                                              • Can be used in areas where exposive atmospheres may occur
                                                                              • Transparent plastic housing, non corrosive
                                                                            • PERMA STAR

                                                                            • PERMA STAR VARIO 2.0
                                                                              perma STAR VARIO operates fully automaticly, temperature independent and very precisely. The system consists of an electromechanical drive unit, a lubrication cartridge (LC) with a lubricant volume of 60, 120 or 250 cm³ and a battery pack. The desired discharge period and LC size can easily be selected with the push button and are immediately visible in the display. The current operating status is indicated on the display and with the all around LED signal lights (red/green), which are visible from a distance.

                                                                              PERMA STAR CONTROL 2.0
                                                                              perma STAR CONTROL is machine / PLC controlled and can easily be integrated into machines with external power supply. The operating status can be transmitted to the PLC. The lubrication system offers two operating modes - TIME and IMPULSE - for more flexibility. In TIME mode, discharges are only carried out when the machine is in operation. In IMPULSE mode, the system discharges a predefined lubricant amount every time external power is applied. The desired mode can be selected via the display. perma STAR CONTROL consists of an electromechanical drive unit with LCD display and an LC unit (available in three different sizes 60 cm³, 120 cm³, 250 cm³). The system discharges exact amounts independent of temperature and up to 6 bar counter pressure.
                                                                            • PERMA PRO

                                                                            • perma ULTRA

                                                                              High pressure lubrication system with a wide temperature range and bluetooth communication.

                                                                              • Fully automatic, highly accurate dispensing, independent of temperature and counter pressure. With three cartridge sizes, pressure build-up to 50 bar and options of weekly and monthly time settings.
                                                                              • perma ULTRA is an extremely versatile and capable lubrication system suitable for a wide range of applications requiring high lubrication dosages. 
                                                                              • It is applied where long lubrication pipes/lines (upto 20m) are necessary to ensure safe access to the lubrication point.

                                                                              Your advantages:

                                                                              • Bluetooth functionality as standard
                                                                              • Simple operation via perma CONNECT app
                                                                              • Configure, control and maintain remotely
                                                                              • 3 cartridge sizes: 500, 750 1000 cc
                                                                              • Pressure build-up to 50 bar
                                                                              • Grease line upto 20 m
                                                                              • System operates reliably from -40 °C to +60 °C
                                                                              • Remote mounting; wide remote installation options to improve workplace safety by installinng the systems at safe and easy-to-access locations
                                                                              • LCD display with backlighting and push button operation
                                                                              • IP67 / IP65
                                                                            • PERMA ECOSY

                                                                            • Perma ECOSY is a compact multi-point lubrication system that features a clear construction and multiple functionality. It can supply up to 6 lubrication points with oil. Each outlet’s discharge amount can be set individually and separately from the other outlets. Data about machine operating conditions is collected and transmitted to the lubrication system by a sensor or by the PLC. This ensures lubrication as needed. perma ECOSY is basically maintenance-free; it only requires simple refills of the oil tank.

                                                                              Advantages:
                                                                              • Compact construction
                                                                              • Innovative distributor function
                                                                              • Pre-configured interfaces
                                                                              • User-friendly operation via 4 display buttons
                                                                              • Display with scroll menu
                                                                              • Low temperature shut-off function; indication on display
                                                                              • Reserve shown on display and reservesignal output
                                                                              • Displays sensor function OK
                                                                              • Sturdy metal drive unit
                                                                              • Up to 6 outlets individually adjustable via menu
                                                                              • Display options: language (English/German), temperature (°C / °F)
                                                                              • Selectable working modes: sensor-, time-, or impulse mode
                                                                              • Malfunctions indicated by display and separate malfunction signal output
                                                                            • perma ULTRA

                                                                            • High pressure lubrication system with a wide temperature range and bluetooth communication. Fully automatic, highly accurate dispensing, independent of temperature and counter pressure. With three cartridge sizes, pressure build-up to 50 bar and options of weekly and monthly time settings. perma ULTRA is an extremely versatile and capable lubrication system suitable for a wide range of applications requiring high lubrication dosages. It is applied where long lubrication pipes/lines (upto 20m) are necessary to ensure safe access to the lubrication point.

                                                                              Advantages:
                                                                              • Bluetooth functionality as standard
                                                                              • Simple operation via perma CONNECT app
                                                                              • Configure, control and maintain remotely
                                                                              • 3 cartridge sizes: 500, 750 1000 cc
                                                                              • Pressure build-up to 50 bar
                                                                              • Grease line upto 20 m
                                                                              • System operates reliably from -40 °C to +60 °C
                                                                              • Remote mounting; wide remote installation options to improve workplace safety by installinng the systems at safe and easy-to-access locations
                                                                              • LCD display with backlighting and push button operation
                                                                              • IP67 / IP65
                                                                            • PERMA SPARE PARTS

                                                                              • Brackets
                                                                              • Installation kits
                                                                              • Oil retaining valve
                                                                              • Product accessories
                                                                              • Reducers
                                                                              • Hoses
                                                                              • Tube connectors
                                                                              • Oil brushes
                                                                              • Externsions
                                                                              • Angles
                                                                              • Grease
                                                                              • Oil