Conveying angles of up to 30° can be achieved without profiles with certain patterned belts.
So patterned belts are not just an affordably-priced alternative to profile belts. The combination of patterned belts with longitudinal or lateral profiles is often possible.
Patterns can be peeled off from the belt edge up to a width of 150 mm (e.g. for clamps in swan-neck conveyors).
This additional protection can be applied to virtually every Siegling Transilon conveyor belt. You can find detailed information on the combinations possible in our data sheets.
Even wide belts run flat, so even lightweight goods remain in position.
With their high coefficients of thermal conductivity, knife edge belts are exceptionally well suited for use as cooling tunnel belts. They are physiologically harmless, largely imper-vious to oils and greases and meet BfR, EU and FDA stipulations for the conveying of unwrapped foodstuffs. They can also be supplied in blue and white HACCP design.
Curved belts can be fabricated from one or more segments. Fabrication from several segments improves the distribution of forces within the belt. Curved belts can be equipped with perforations or eyelets along the edges so they can be attached to tracking systems later on.
In line with DIN-EN-ISO 284 thresholds, the electrical resistance measured on the inside (lengthways) RDi, according to ISO 21178, is less than 3 x 108 Ω.
Combined with the coating materials appropriate in each case, NA belts guarantee smooth operation when using in electro-magnetic fields such as machine components with high frequency, X-ray and microwave applications.
NA belts in many different coatings with specific properties for particular products provide a high safety standard, in particular because of stringent quality controls, in the food and tobacco, chemical, pharmaceutical and particle board industries. In this way sensitive metal detectors for example can be used to an optimum with Siegling Transilon NA belts.
Numerous belt types also have an electrical volume resistance RD < 1 x 10^9 Ω, verified in accordance with ISO 21178.
HC belts are particularly suitable for conveying electronic components and anywhere where, if the belts and the goods conveyed are charged, there is a detrimental effect on product quality e.g. in the nonwoven or chemical industries.
Minimum friction coefficients between slider bed and underside and accumulation goods and top face must be maintained so that required power and wear and tear is kept low.
Siegling Transilon accumulation belts with duroplastic urethane coating (UH or U2H) are particularly abrasion resistant and have low friction coefficients. These properties guarantee long durability and reduce maintenance costs.
As a belt supplier Forbo Siegling faces up to this responsibility and if required, will supply processing belts that may be used in an explosive atmosphere.
Our extensive experience in the field of light materials handling is our guarantee for excellent product quality and practice-oriented service.
The "pros" of Siegling Proposition: