- Offer Profile
- Since 1970, Aerotech has
designed and manufactured the highest performance motion control and
positioning systems for our customers in industry, government, science, and
research institutions around the world.
Aerotech’s precision motion control products provide the critical
performance for today’s demanding applications in markets such as: medical
device and life sciences, semiconductor and flat panel, photonics,
automotive, data storage, laser processing, military/aerospace, electronic
manufacturing and test, assembly, research and development, and others
requiring high precision, high throughput motion solutions.
Product Portfolio
Actuators
- Aerotech's linear actuators are faster than a ball
screw and more accurate than a belt drive. The LMA and LMAC series linear
actuators harness the speed, acceleration, and accuracy capability of a
linear motor for the latest in high-throughput linear actuator technology.
These linear actuators are ideal for pick-and-place machines, gantry axes,
shuttle stages, assembly machines, or as a general-purpose positioner,
wherever you might need a linear actuator.
Since the LMA and LMAC series linear actuators integrate the mechanical and
electrical components, they eliminate the guesswork involved with choosing
bearings, motors, encoders, and the other components required for a linear
motor system.
This makes the LMA and LMAC series linear actuators superior to the
traditional linear actuators on the market. LMA and LMAC Linear Actuators
- Travel: ≤1000 mm
Resolution: 10 nm-1.0µm
Speed: 5 m/s
Air Bearing Stages
- Aerotech air bearing tables incorporate over three
decades of knowledge we have in designing high precision motion control and
positioning systems.
Driven by our brushless linear servomotors, Aerotech air bearings are
perfect in semiconductor equipment, fiberoptics, photonics, and other
critical industrial automation applications. Our air bearings incorporate an
active preload on both vertical and horizontal surfaces.
Opposing thin-film pressure maintains the bearing nominal gap tolerance.
This design, in addition to the large air bearing surface that distributes
the load over a large surface area, results in outstanding stiffness that is
ideal for heavy or offset loading. Proprietary manufacturing techniques
result in an air bearing with unsurpassed geometrical characteristics.
The air bearing has an inherent averaging effect that maximizes performance.
The thin film will fill small surface voids and other irregularities,
yielding superior pitch, roll, yaw, and straightness and flatness
specifications.
Linear Air-Bearing Stages
ABL1000 Air Bearing Stage
- Travel: ≤150 mm
Accuracy: ±0.20 µm
Repeatability: ±0.05 µm
Straightness: ±0.25 µm
Flatness: ±0.25 µm
ABL1500 Air Bearing Stage
- Travel: ≤500 mm
Accuracy: ±0.2 µm
Repeatability: ±0.1 µm
Straightness: ±0.25 µm
Flatness: ±0.25 µm
ABL1500WB Air Bearing Stage
- Travel: ≤500 mm
Accuracy: ±0.4 µm
Repeatability: ±0.1 µm
Straightness: ±0.5 µm
Flatness: ±0.5 µm
ABL2000 Air
Bearing Stage
- Travel: ≤1200 mm
Accuracy: ±0.50 µm
Repeatability: ±0.20 µm
Straightness: ±0.25 µm
Flatness: ±0.25 µm
ABL3600 Air Bearing Stage
- Travel: ≤250 mm
Accuracy: ±1 µm
Repeatability: ±0.2 µm
Straightness: ±0.5 µm
Flatness: ±1 µm
ABL3600 Air Bearing Stage
- Travel: ≤1000 mm
Accuracy: ±0.50 µm
Repeatability: ±0.20 µm
Straightness: ±0.40µm
Flatness: ±0.40µm
ABL9000 Air Bearing Stage
- Travel: ≤1200 mm
Accuracy: ±0.5 µm
Repeatability: ±0.1 µm
Straightness: ±0.50µm
Flatness: ±0.50µm
AHL9000 Air Bearing Stage
- Travel: ≤350 mm
Accuracy: ± 1.0 µm
Repeatability: ±0.2 µm
Straightness: ±0.6 µm
Flatness: ±0.6 µm
ABG10000 Air Bearing Gantry
- Travel: ≤1000 mm
Accuracy: ± 2 µm
Repeatability: ±0.5 µm
Straightness: ±1 µm
Flatness: ±1 µm
Rotary Air-Bearing Stages
PlanarHD Air Bearing Stage
- Travel: 500 mm
Accuracy: ±300 nm
Repeatability: ±50 nm
Resolution: 0.25 nm
ABRS Rotary Air Bearing Stage
- Tabletop Diameter:
128.1-278.1 mm
Resolution:
0.18-0.036 arc sec
Bidirectional Repeatability:
<1 arc sec
ABRT Rotary Air Bearing Stage
- Tabletop Diameter:
100-200 mm
Resolution:
0.055-0.027 arc sec
Bidirectional Repeatability:
<1 arc sec
Vertical Lift Air-Bearing Stages
Airlift 115 Vertical Translation Stage
- Travel: 50, 100, 150 mm
Velocity: 50 mm/s
Load: 15 kg
ABL1500Z Air Bearing, Linear Motor Vertical Lift Stage
- Travel: 50, 100, 150, 200 mm
Velocity: 300 mm/s
Load: 15 kg
Amplifiers
- Aerotech manufactures drives for a wide range of
industrial automation applications.
Our drives power our own servomotors and complement Aerotech motion
controllers in applications as diverse as industrial robots, vision systems,
assembly machines, machine tools, semiconductor manufacturing equipment,
electronic manufacturing, and in a variety of other industrial control
solutions.
Aerotech drives, controllers, and linear and rotary servomotors are
perfectly matched to provide the ideal solution to your motion control
application.
Aerotech drives are available in PWM and linear output, with from 10 to 150
amps peak current.
Automation 3200 (A3200) Amplifiers (Used Exclusively with
the Automation 3200 Motion Control Platform)
Ndrive® HPe Digital Servo Amplifier
- Continuous Current:
5-75 amps
Peak Current:
10-150 amps
Bus Voltage:
10-320 VDC
Output:
PWM
Motor Style:
Brush, Brushless, Stepper
Ndrive® CP Amplifier
- Continuous Current:
5-10 amps
Peak Current:
10-30 amps
Bus Voltage:
10-320 VDC
Output:
PWM
Motor Style:
Brush, Brushless, Stepper
Ndrive® MP Digital Servo Amplifier
- Continuous Current
5 amps
Peak Current
10 amps
Bus Voltage
10-80 VDC
Output
PWM
Motor Style
Brush, Brushless, Stepper
Ndrive® HLe Digital Servo Amplifier
- Continuous Current
5-10 amps
Peak Current
10-20 amps
Bus Voltage
±40 or ±80 VDC
Output
Linear
Motor Style
Brush, Brushless, Stepper, Voice Coil
Ndrive® CL Digital Servo Amplifier
- Continuous Current
5 amps
Peak Current
10 amps
Bus Voltage
±40 VDC
Output
Linear
Motor Style
Brush, Brushless, Stepper, Voice Coil
Ndrive® ML Digital Servo Amplifier
- Continuous Current:
5 amps
Peak Current:
10 amps
Bus Voltage:
±40 VDC
Output:
Linear
Motor Style:
Brush, Brushless, Stepper, Voice Coil
Ensemble Controllers/Amplifiers (Used Exclusively with
the Ensemble Motion Control Platform)
Ensemble HPe Controller & Amplifier
- Continuous Current:
5-75 amps
Peak Current:
10-150 amps
Bus Voltage:
10-320 VDC
Output:
PWM
Motor Style:
Brush, Brushless, Stepper
Ensemble CP Controller & Amplifier
- Continuous Current:
5-10 amps
Peak Current:
10-30 amps
Bus Voltage:
10-320 VDC
Output:
PWM
Motor Style:
Brush, Brushless, Stepper
Ensemble MP Controller & Amplifier
- Continuous Current:
5 amps
Peak Current:
10 amps
Bus Voltage:
10-80 VDC
Output:
PWM
Motor Style:
Brush, Brushless, Stepper
Ensemble HLe Controller & Amplifier
- Continuous Current:
5-10 amps
Peak Current:
10-20 amps
Bus Voltage:
±40 or ±80 VDC
Output:
Linear
Motor Style:
Brush, Brushless, Stepper, Voice Coil
Ensemble CL Controller & Amplifier
- Continuous Current:
5 amps
Peak Current:
10 amps
Bus Voltage:
±40 VDC
Output:
Linear
Motor Style:
Brush, Brushless, Stepper, Voice Coil
Ensemble ML Controller & Amplifier
- Continuous Current:
5 amps
Peak Current:
10 amps
Bus Voltage:
±40 VDC
Output:
Linear
Motor Style:
Brush, Brushless, Stepper, Voice Coil
Soloist Controllers/Amplifiers (Used Exclusively with the
Soloist Motion Control Platform)
Soloist HPe Controller & Amplifier
- Continuous Current:
5-75 amps
Peak Current:
10-150 amps
Bus Voltage:
10-320 VDC
Output:
PWM
Motor Style:
Brush, Brushless, Stepper
Soloist CP Controller & Amplifier
- Continuous Current:
5-10 amps
Peak Current:
10-30 amps
Bus Voltage:
10-320 VDC
Output:
PWM
Motor Style:
Brush, Brushless, Stepper
Soloist MP Controller & Amplifier
- Continuous Current:
5 amps
Peak Current:
10 amps
Bus Voltage:
10-80 VDC
Output:
PWM
Motor Style:
Brush, Brushless, Stepper
Soloist HLe Controller & Amplifier
- Continuous Current:
5-10 amps
Peak Current:
10-20 amps
Bus Voltage:
±40 or ±80 VDC
Output:
Linear
Motor Style:
Brush, Brushless, Stepper, Voice Coil
Soloist CL Controller & Amplifier
- Continuous Current:
5 amps
Peak Current:
10 amps
Bus Voltage:
±40 VDC
Output:
Linear
Motor Style:
Brush, Brushless, Stepper, Voice Coil
Soloist ML Controller & Amplifier
- Continuous Current:
5 amps
Peak Current:
10 amps
Bus Voltage:
±40 VDC
Output:
Linear
Motor Style:
Brush, Brushless, Stepper, Voice Coil
Amplifiers (for use with any motion controller)
BA Series Amplifier
- Continuous Current:
5-50 amps
Peak Current:
10-100 amps
DC Bus Voltage:
40-320
Output:
PWM
Motor Style:
Brush, Brushless
BL Series Amplifier
- Continuous Current:
5-10 amps
Peak Current:
10-20 amps
DC Bus Voltage:
±40-80
Output:
Linear
Motor Style:
Brush, Brushless
Drive Racks
- Aerotech’s family of drive rack systems can be
configured with up to 6 amplifiers in any combination of brushless, brush,
or stepper control.
All drive racks have integral circuit breaker switches for over-current
protection and convenient power disconnect.
Drive rack options include shunt regulators, brake control, and E-Stop
circuitry. Custom drive racks can be designed. Npaq Rack Mount Servo Amplifier
- Continuous Current:
5 - 15 Amps
Peak Current:
10 - 30 Amps
DC Bus:
10 - 320 VDC
Output:
PWM, Linear
Motor Style:
Brush, Brushless, Stepper
Number of Axes: 6
Controller Capatibility:
Automation 320
Ensemble Epaq
- Continuous Current:
5 Amps
Peak Current:
10 Amps
DC Bus: 24 - 90 VDC
Output: PWM, Linear
Motor Style:
Brush, Brushless, Stepper
Number of Axes: 6
Controller Capatibility: Ensemble
Gantry Systems
- Aerotech gantry systems use our own brushless linear
servomotors to meet the needs of a variety of gantry customers, from
electronic assembly and electronic manufacturing to vision systems and
industrial automation.
These industrial robots are available in models from low-cost modular linear
actuators assembled in a gantry configuration with matching motion control
and drives, to sophisticated gantry models with the largest travel, highest
speed, and highest acceleration available.
Aerotech has over 30 years of experience in brushless linear motor design,
motion controllers, and drives that permit us to offer a complete gantry
solution that perfectly fits your gantry application. Cartesius Cartesian Gantry
- Travel: 300 mm - 1500 mm
Velocity:
300 mm/s - 1400 mm/s
AGS1000 Cartesian Gantry
- Travel: ≤500 mm
Accuracy: ±5.0 µm (±200 µin)
Load: 15 kg (33 lb)
AGS1500 Linear Motor Gantry
- Travel: ≤500 mm
Accuracy: ±1.0 µm
Load: 15 kg
AGS10000 Cartesian Gantry
- Travel: ≤1000 mm
Accuracy: ±5.0 µm
Load: 25 kg (55.1 lb.)
AGS15000 Linear Motor Gantry
- Travel: 500 mm - 1250 mm
Accuracy: ±1.5 µm
ABG10000 Air Bearing Gantry
- Travel: ≤1000 mm
Accuracy: ± 2 µm
Load: 84 kg
Goniometers
ANT-20G Series Direct-Drive Goniometers
- Max Travel: 20 degrees
Accuracy: ±30 µrad
Speed: 150 degrees per second
Load: 3.5 kg
AGC Series Goniometers
- Travel: ±45 degrees
Resolution: 3 arc second
Speed: 78 degrees/s
ALAG Series Goniometers
- Travel: ±5 degrees
Resolution:
0.0045 arc-second/count
Speed: 5 degrees/s
Load: 1500 lb (680 kg)
Photonics and Fiberoptics Nanopositioners
- Aerotech photonics and fiberoptics nanopositioners are
perfect for the high-volume manufacture of photonics and fiberoptics
components and systems.
Our fiberoptics positioning systems utilize Aerotech’s own brushless linear
servomotors for the maximum performance in the most compact package.
We manufacture many models of drives and motion controllers to provide a
complete fiberoptics and photonics manufacturing package
that is virtually maintenance-free and available for 24/7 operation.
Aerotech nanopositioners feature the highest closed-loop resolution
available with up to six axes of coordinated motion.
Following is a list of our fiberoptics and photonics nanopositioners.
With efficient automation in mind, our fiberoptics equipment combines
durability and the latest technology to create nanopositioners that fit
seamlessly into manufacturing systems and endure nonstop use. FiberMax Systems
- Aerotech’s FiberMaxTM represents a significant
breakthrough in the high-volume manufacturing and testing of fiberoptics
components.
FiberAlign 90/130 Fiberoptics Aligning System
- Aerotech’s FiberAlign series is a high-performance
fiberoptics aligning system incorporating best-in-class drive and
state-of-the-art axis control technology.
FiberAlign 130US Fiberoptics System
- In addition to the performance features of the standard
FA130 fiberoptics system, the Ultra-Stable version is manufactured from low
coefficient of thermal expansion materials to provide unparalleled thermal
stability in the manufacturing and test environment.
FiberGlide 3D Fiberoptics Positioner
- The FiberGlide 3D series of fiberoptics positioners
represents the highest performance miniature three axis air-bearing stages
available.
ABL1000 Linear Air Bearing Fiberoptics Positioner
- The linear fiberoptics positioner is a fully preloaded,
noncontact design. Inherently frictionless, air bearings have proven to be
the standard in precision applications, and Aerotech has now produced a
miniature version that is well-suited for the fiberoptics industry.
FiberCouple 130
- Aerotech’s FiberCouple 130 is the first system designed
to meet the unique demands associated with fiber coupling.
FiberGrate 2000 Fiberoptics Subsystem
- FiberGrate is the world’s first complete turnkey motion
fiberoptics sub-system specifically designed for the manufacture of fiber
Bragg gratings. A flexible workspace allows the system to be optimized for
the unique needs of each manufacturer.
ANT-4V Vertical Alignment Stage
- The ANT-4V represents a significant breakthrough in
vertical alignment of high-precision components. This unique, patented
device incorporates the best high-performance features: high speed (50 mm
per second), high resolution (2 nm), superior in-position stability (4 nm),
and high accuracy (200 nm), in one compact package.
ANT-20RA Rotary Actuator
- Aerotech’s ANT-20RA is a high-performance rotary actuator
specifically designed to be attached to ANT, FiberAlign 90 and 130 series
nano-positioners.
ANT-20G-50/-90/-110/-160
- Aerotech’s ANT-20G goniometers represent a significant
fiberoptics breakthrough in the category of high-accuracy angular alignment
of optical components. The ANT-20G series provides an industry-leading
positioning speed of 150 degrees per second.
Semiconductor Industry Tool Components
SolarScribe
- Travel: 500
- 2500 mm
Max Acceleration: 5 g
Orthogonality: 5 arc sec
MaskAlign
- Travel: 100 mm
Accuracy: 1 micron
Load: 2 kg
WaferMax T
- Diameter: 106.7 mm
Accuracy: ±5 arc sec
Load: 40 kg
WaferMax Z
- Travel: 5 mm
Velocity: 4 mm/s
Load: 15 kg
AVL1000 Verticle Lift Stage
- Travel: 2 mm
Velocity: 5 mm/s
Load: 50 kg
ARA1000 Rotary Actuator
- Diameter: 342.9 mm
Accuracy: ±2 arc sec
Load: 45 kg
Wafer Chucks
- To simplify system development and reduce costs, Aerotech
manufactures and integrates high precision, custom engineered chucks. Custom
designs include those for 200, 300, and 450 mm wafers, as well as reticles
and flat-panel displays.
Laser and Medical Systems
VascuLathe ACS/ASR
- VascuLathe® represents a revolutionary approach to
satisfying the demanding requirements of stent manufacturing applications.
The fully integrated motion system couples automated material handling
functionality and wet cutting operation with high performance direct-drive
linear and rotary motion capability.
LaserTurn 2 and 5
- The LaserTurn® series of products are the first dedicated
motion subsystems targeted directly at cylindrical laser processing
applications. The integrated linear-rotary system combines automated
material handling functionality and wet cutting operation with high
performance direct-drive linear and rotary motion. The
pneumatically-actuated 3-jaw gripper has a clear aperture for product
feedthrough, and can be configured for O.D., I.D., or odd form gripping with
various jaw geometries, while the ER collet supports tubing diameters from
0.5 mm to 30 mm.
LaserTurn 1
- The LaserTurn® 1 cylindrical laser machining system
supports material from 0.1 mm to 7.9 mm in diameter, making it an ideal
platform for the manufacture of cardiovascular and neural stents. The system
can be configured for wet or dry cutting and includes options for material
advance and bushing alignment platforms.
HermeSys
- The HermeSys™ is a holistic design that optimizes all
aspects of the medical device hermetic seam welding process. Specialized
mechanics are used to accurately position the device during the laser
welding process, while onboard kinematics allows the programming of laser
weld geometry in part space for rapid optimization of process parameters on
the machine, with no post-processing required.
Vertical Lift Stages
- Aerotech lift stages are available with direct drive
or lead-screw-based mechanics to provide the ideal solution for your
application. These stages feature resolution to 2 nm and travels up to 25
mm, with compact footprints, and are designed for a wide range of
positioning applications.
ANT-95-3-V Series Vertical Lift Stage
- Travel: 3 mm
Velocity: 75 mm/s
Load: 1.5 kg
ANT-130-5-V Series Vertical Lift Stage
- Travel: 5 mm
Velocity: 75 mm/s
Load: 3.0 kg
ANT-4V Vertical Lift Stage
- Travel: 4 mm
Velocity: 50 mm/s
Load: 2 kg
AVL125 Vertical Lift Stage
- Travel: 25 mm
Velocity: 100 mm/s
Load: 7 kg
AVL1000 Vertical Lift Stage
- Travel: 2 mm
Velocity: 5 mm/s
Load: 50 kg
WaferMax Z Vertical Lift Stage
- Travel: 5 mm
Velocity: 4 mm/s
Load: 10 kg
AVS1000 Vertical Lift Stage
- Travel: 5 mm or 10 mm
Velocity: 20 mm/s
Load: 135 kg
AVS100/AVSI100 Vertical Lift Stage
- Travel: 6, 13, 25 mm
Velocity: 50 mm/s
Load: 25 kg
ANT95-L-Z Linear Motor Vertical Stage
- Max Travel: 50 mm
Accuracy: ±300 nm
Load: 5.0 kg
ANT130-L-Z Linear Motor Vertical Stage
- Max Travel: 60 mm
Repeatability: ±300 nm
Load: 10 kg
ABL1500Z Air-Bearing Vertical Translation Stage
- Travel: 50, 100, 150, 200 mm
Velocity: 300 mm/s
Load: 15 kg
Airlift 115 Air-Bearing Vertical Lift Stage
- Travel: 50, 100, 150 mm
Velocity: 50 mm/s
Load: 15 kg
VTS300 Vertical Translation Stage
- Travel: 50, 100, 150, 200 mm
Velocity: 5 mm/s
Load: 450 kg
Linear Motors
- Aerotech’s “U-channel” brushless linear servomotors
have proven ideal for robots, actuators, tables/stages, fiberoptics/photonics
alignment and positioning, assembly, machine tools, semiconductor equipment,
electronic manufacturing, vision systems, and in many other industrial
automation applications. Aerotech linear motors are direct drive and consist
of a noncontacting forcer coil and “U-channel” rare-earth magnet track. This
design eliminates backlash, windup, wear, and maintenance issues associated
with ball screw, belt, and rack and pinion based motion control and
positioning systems. The noncontact design of the forcer and magnet track
results in a maintenance-free system. Aerotech manufactures a complete line
of linear motors to meet the needs of your industrial automation
application.
BLMUC Brushless Linear Servomotor
- Continuous Force:
18.3 - 58 N
Peak Force:
125 - 232 N
BLMC Brushless Linear Servomotor
- Continuous Force:
66 - 161 N
Peak Force:
264 - 646 N
BLM Brushless Linear Servomotor
- Continuous Force:
173 - 398 N
Peak Force:
693 - 1590 N
BLMH Brushless Linear Servomotor
- Continuous Force:
271 - 549 N
Peak Force:
1083 - 2195 N
BLMX Brushless Linear Servomotor
- Continuous Force:
972 - 1063 N
Peak Force:
3887 - 4252 N
BLMF Linear Motors
- Continuous Force:
19 - 112 N
Peak Force:
75 - 448 N
BLMFS5 Linear Motor
- Continuous Force:
323 - 697 N
Peak Force:
699 - 1507N
Linear Stages
- Aerotech manufactures a large selection of linear
tables/slides/stages that utilize our own brushless linear direct-drive
servomotors, as well as ball screw models driven with Aerotech brush or
brushless rotary motors. Travels for our linear tables range from 25 mm to
1.5 meters. Aerotech’s tables are utilized in high-performance applications
in industrial robots, fiberoptics and photonics, vision systems, machine
tools, assembly, semiconductor equipment, medical component laser machining,
electronic manufacturing, and other industrial automation applications. We
even offer our new NANO Technology series stages that provide nanometer
resolution, accuracy, repeatability, and in-position stability in models
with travels from 25 mm to 150 mm. In addition, Aerotech manufactures drives
and motion control solutions that perfectly complement our linear tables.
Precision Mechanical Bearings Ball-Screw-Driven Stages
ATS50 Linear Stage
- Travel: 25 or 50 mm
Accuracy: ±2.5µm/25mm
Load: 5.0 kg
ATS100 Linear Stage
- Travel: up to 200 mm
Accuracy: ±0.5 µm
Load: 25.0 kg
ATS150 Linear Stage
- Travel: up to 250
mm
Accuracy: ±1.0 µm
Load: 45 kg
PRO115 Linear Stage
- Travel: up to 600 mm
Accuracy: ±6 µm
Load: 40.0 kg
PRO165 Linear Stage
- Travel: up to 600
mm
Accuracy: ±6 µm
Load: 45 kg
PRO225 Linear Stage
- Travel: up to 1000
mm
Accuracy: ±11 µm
Load: 100 kg
PRO280 Linear Stage
- Travel: 300 mm - 1000 mm
Accuracy: ±17.5 µm
Load: 150.0 kg
PRO560 Linear Stage
- Travel: 300 mm - 1000 mm
Accuracy: ±17.5 µm
Load: 150.0 kg
PRO115-HS (High-Speed) Linear Stage
- Travel: up to 500 mm
Accuracy: ±8 µm
Loa: 40.0 kg
PRO165-HS (High-Speed) Linear Stage
- Travel: up to 500
mm
Accuracy: ±8 µm
Load: 45 kg
PRO225-HS (High-Speed) Linear Stage
- Travel: up to 1500 mm
Accuracy: ±11 µm
Load: 100 kg
PRO280-HS (High-Speed) Linear Stage
- Travel: 300 mm - 1500 mm
Accuracy: ±17.5 µm
Load: 150.0 kg
PRO560-HS (High-Speed) Linear Stage
- Travel: 300 mm - 1500 mm
Accuracy: ±17.5 µm
Load: 150.0 kg
ATS0300 Linear Stage
- Travel: 50 mm
Accuracy: ±2.5µm/25mm
Load: 25.0 kg
ATS1000 Linear Stage
- Travel: up to 600 mm
Accuracy: ±1.0 µm
Load: 50 kg
ATS1100-H Linear Stage
- Travel: up to 600
mm
Accuracy: ±1.0 µm
Load: 70 kg
ATS1500 Linear Stage
- Travel: up to 300
mm
Accuracy: 1.0 µm/25 mm
Load: 135 kg
ATS2000 Linear Stage
- Travel: up to 300 mm
Accuracy: ±1.0 µm
Load: 80.0 kg
ATS3600 Open-Frame Linear Stage
- Travel: up to 400
mm
Accuracy: ±1.0 µm
Load: 90 kg
ATS5000 Linear Stage
- Travel: up to 1000
mm
Accuracy: ±1.0 µm
Load: 135 kg
ATS5000WB Linear Stage
- Travel: up to 1000 mm
Accuracy: ±1.0 µm
Load: 135 kg
ATS6200 Linear Stage
- Travel: up to 1500 mm
Accuracy: 1.0 µm/25 mm
Load: 90 kg
High Precision Mechanical Bearings Linear-Motor-Driven
Stages
ANT95-L NanoTranslation, Cross-Roller Bearing Linear
Stage
- Max Travel: 25 or 50 mm
Accuracy: ±250 nm
Load: 7.0 kg
ANT95-XY NanoTranslation, Cross-Roller Bearing Linear
Stage
- Max Travel:
25 x 25 or 50 x 50 mm
Accuracy: ±250 nm
Load: 6.0 kg
ANT-130XY NanoTranslation, Two Axis, Cross-Roller
Bearing Linear Stage
-
Max Travel: 60, 110, 160 mm
Accuracy: ±250 nanometers
Speed: 350 mm/s
Load: 12 kg
ANT130-L NanoTranslation, Cross-Roller Bearing Linear
Stage
- Max Travel:
35, 60, 110, 160 mm
Accuracy: ±250 nm
Load: 12.0 kg
ANT95-L-Z Linear Motor Vertical Stage
- Max Travel: 50 mm
Accuracy: ±300 nm
Load: 5.0 kg
ANT130-L-Z Linear Motor Vertical Stage
- Max Travel: 60 mm
Repeatability: ±300 nm
Load: 10 kg
ANT180-L Linear Motor Stage
- Max Travel: 360 mm
Accuracy: ±150 nm
Load: 30.0 kg
ALS130H Linear Motor Stage
- Max Travel: 150 mm
Repeatability: 75 nm
Load: 12.0 kg
ALS130 Linear Motor Stage
- Max Travel: 150 mm
Accuracy: ±0.3µm
Load: 12.0 kg
ALS135 Linear Motor Stage
- Max Travel: 200 mm
Accuracy: ±0.3 µm
Load: 12 kg
ALS1000 Linear Stage
- Max Travel: 450 mm
Accuracy: ±1.0 µm
Load: 50 kg
PRO165LM Linear Stage
- Travel: 100 mm - 1000 mm
Accuracy: ±4 µm
Load: 45 kg
PRO225LM Linear Stage
- Max Travel: 1500 mm
Accuracy: ±1.5 µm
Load: 100 kg
PRO280LM Linear Stage
- Max Travel: 1500 mm
Accuracy: ±2.0 µm
Load: 150 kg
PRO560LM Linear Stage
- Max Travel: 1500 mm
Accuracy: ±2.0 µm
Load: 150 kg
ALS2200 Linear Motor Stage
- Max Travel: 150 mm
Accuracy: ±0.75 µm
Load: 30.0 kg
ALS3600 Open Frame Linear Stage
- Max Travel: 400 mm
Accuracy: ±2.0 µm
Load: 90.0 kg
ALS5000 Linear Motor Stage
- Max Travel: 1000 mm
Accuracy: ±1.0 µm
Load: 135 kg
ALS5000WB Linear Motor Stage
- Max Travel: 1000 mm
Accuracy: ±1.0 µm
Load: 135 kg
ALS20000 Linear Stage
- Max Travel: 600 mm
Accuracy: ±1.0 µm
Load: 70.0 kg
ALS25000 Linear Motor Stage
- Max Travel: 600 mm
Accuracy: ±1.0 µm
Load: 70 kg
Laser and Medical Systems
VascuLathe ACS/ASR
- VascuLathe® represents a revolutionary approach to
satisfying the demanding requirements of stent manufacturing applications.
The fully integrated motion system couples automated material handling
functionality and wet cutting operation with high performance direct-drive
linear and rotary motion capability.
LaserTurn 2 and 5
- The LaserTurn® series of products are the first dedicated
motion subsystems targeted directly at cylindrical laser processing
applications. The integrated linear-rotary system combines automated
material handling functionality and wet cutting operation with high
performance direct-drive linear and rotary motion. The
pneumatically-actuated 3-jaw gripper has a clear aperture for product
feedthrough, and can be configured for O.D., I.D., or odd form gripping with
various jaw geometries, while the ER collet supports tubing diameters from
0.5 mm to 30 mm.
LaserTurn 1
- The LaserTurn® 1 cylindrical laser machining system
supports material from 0.1 mm to 7.9 mm in diameter, making it an ideal
platform for the manufacture of cardiovascular and neural stents. The system
can be configured for wet or dry cutting and includes options for material
advance and bushing alignment platforms.
HermeSys
- The HermeSys™ is a holistic design that optimizes all
aspects of the medical device hermetic seam welding process. Specialized
mechanics are used to accurately position the device during the laser
welding process, while onboard kinematics allows the programming of laser
weld geometry in part space for rapid optimization of process parameters on
the machine, with no post-processing required.
Manual Positioners
- In those cases where a completely automated system is
not required, or where one or more axes needs very infrequent adjustment, or
perhaps in early stage proof-of-concept laboratory experiments, Aerotech’s
manual stages can do the job. Aerotech offers a line of nanometer
resolution, large travel range, rotary and linear tables. These manual
stages, which have been used extensively by the major research laboratories
throughout the world over the past thirty years, offer excellent in-position
stability, high positioning resolution, large adjustment range, and
outstanding thermal stability.
Precision Tilt Tables
- Range: ±10 degrees
Resolution: ±0.2 arc second
MaxLoad: 4.54 kg (10 lb.)
Rotary Stages
- Range: 360 degrees
Resolution: ±0.1 arc second
MaxLoad: 11.36 kg (25 lb.)
Linear Stages
- Range: 25 mm ( 1in.)
Resolution: 25 nm
MaxLoad: 22.7 kg (50 lb.)
NANO Technology
ANT95-L NanoTranslation, Crossed-Roller Bearing
Linear Stage
- Max Travel: 25 or 50 mm
Accuracy: ±250 nanometers
Speed: 500 mm/s
Load: 7.0 kg
ANT95-XY NanoTranslation, Two Axis,
Crossed-Roller Bearing Linear Stage
- Max Travel:
25 x 25 or 50 x 50 mm
Accuracy : ±250 nanometers
Speed: 500 mm/s
Load: 6.0 kg
ANT130-L NanoTranslation, Crossed-Roller Bearing
Linear Stage
- Max Travel:
35, 60, 110, 160 mm
Accuracy: ±250 nanometers
Speed: 350 mm/s
Load: 12.0 kg
ANT-130XY NanoTranslation, Two Axis,
Crossed-Roller Bearing Linear Stage
-
Max Travel: 60, 110, 160 mm
Accuracy: ±250 nanometers
Speed: 350 mm/s
Load: 12 kg
ANT95-R Series Direct-Drive Rotary Stage
- Max Aperture: 11 mm
Accuracy: 5 arc sec
Resolution: 0.1 arc sec
Load: 2.0 kg
ANT130-R Series Direct-Drive Rotary Stage
- Max Aperture: 11 mm
Accuracy: 5 arc sec
Resolution: 0.1 arc sec
Load: 3.0 kg
ANT95-L-Z Series Linear Motor Vertical Stage
- Max Travel: 25 or 50 mm
Accuracy: ±300 nm
Speed: 200 mm/s
Load: 5.0 kg
ANT130-L-Z Series Linear Motor Vertical Stage
- Max Travel: 35 or 60 mm
Accuracy: ±300 nm
Speed: 200 mm/s
Load: 10 kg
ANT-95-3-V Series Linear Motor Vertical Lift Stage
- Max Travel: 3 mm
Accuracy: ±2 µm
Speed: 75 mm/s
Load: 1.5 kg
ANT-130-5-V Series Linear Motor Vertical Lift Stage
- Max Travel: 5 mm
Accuracy: ±200 nm
Speed: 75 mm/s
Load: 3.0 kg
ANT-20G Series Direct-Drive Goniometers
- Max Travel: 20°
Accuracy: ±30 µrad
Speed: 150 degrees per second
Load: 3.5 kg
Optical Mounts and Gimbals
- Aerotech's AOM family of optical mounts and gimbals is
designed for highly accurate pointing, scanning and target tracking of large
optics, antennae, telescopes, and cameras. These optical mounts and gimbals
are also used to test and calibrate inertial sensors, gyros and seeker
heads. The AOM family of optical mounts and gimbals comes in various sizes
and capabilities to fit many different positioning requirements. The AOM
optical mounts and gimbals provide sub arc second resolution in either
motorized or manual configurations.
Direct Drive Optical Mounts and Gimbals
AMG LP Series Optical Mounts and Gimbals
- Resolution:
.32 µrad - 31.5 µrad
Aperture size range:
95 mm - 193.8 mm
Load:
6.8 kg - 16 kg
AMG Series Optical Mounts and Gimbals
- Resolution:
.27 µrad - 0.13 µrad
Aperture size range:
194 mm - 591 mm
Load:
20 kg - 70 kg
AOM360D Optical Mounts and Gimbals
- Resolution
0.27 µrad
Aperture size range
203.2 mm - 508.0 mm
Load
7.0 kg - 50.0 kg
Gear Driven Optical Mounts and Gimbals
AOM130M Optical Mounts and Gimbals
- Resolution:
.04 µrad - 0.024 µrad
Aperture size range:
152.4 mm - 609.6 mm
Load:
4.5 kg - 264 kg
AOM300 Optical Mounts and Gimbals
- Resolution:
29.1 µrad - 14.6 µrad
Aperture size range:
152.4 mm - 203.2 mm
Load:
9.1 kg
APT Pan and Tilt Mounts
- Position Resolution:
7.6 arc sec
Pan Range:
Continuous
Load:
35 kg
Manual Optical Mounts and Gimbals
AOM110 Optical Mounts and Gimbals
- Resolution:
0.29 µrad - 0.73 µrad
Aperture size range:
152.4 mm - 304.8 mm
Range:
.± 2.5° - ± 6°
AOM130 Optical Mounts and Gimbals
- Resolution:
0.13 µrad - 0.2 µrad
Aperture size range:
152.4 mm - 609.6 mm
Load:
4.5 kg - 264 kg
Rotary Motors
- Aerotech's rotary motor family addresses the needs of
both ultra-precision positioning and high-throughput industrial automation
applications. Our motors have among the highest torque to inertia ratios
available. Brushless rotary motors feature neodymium iron boron magnets for
maximum torque and acceleration in a small package.
BM Brushless Rotary Motors
- Type:
Brushless
Continuous Torque:
0.16 - 31.6 N-m
Peak Torque:
0.48 - 94.9 N-m
Rated Speed:
2400 - 4000 rpm
BMS Brushless, Slotless Rotary Motors
- Type:
Brushless
Continuous Torque:
0.33 - 2.86 N-m
Peak Torque:
1.31 - 11.43 N-m
Rated Speed:
2000 - 4000 rpm
S Series Brushless, Frameless Torque Motors
- Type:
Frameless
Continuous Torque:
0.20 - 29.09 N-m
Peak Torque:
0.82 - 116.37 N-m
Rated Speed:
200 - 8000 rpm
1000 Series DC Servomotors
- Type:
DC Brush
Continuous Torque:
0.25 - 1.48 N-m
Peak Torque:
1.84 - 7.1 N-m
Rated Speed:
3000 - 6000 rpm
SM Series Stepper Motors
- Type:
Stepper
Continuous Torque:
0.3 - 7.4 N-m
Rotary Stages
- Aerotech manufactures a large selection of rotary
tables including direct-drive models that use our own brushless rotary servo
motors, as well as worm-gear-driven models.
Stages are available with many different size apertures, table diameters,
and mounting options to provide the ideal solution for your industrial
automation application. Wobble and runout performance is outstanding.
Aerotech’s tables are used in industrial robots, fiberoptics and photonics,
vision systems, machine tools, assembly, semiconductor equipment, medical
component laser machining, electronic manufacturing, and other
high-performance industrial automation applications.
In addition, Aerotech manufactures drives and motion control solutions that
perfectly complement our rotary tables.
Rotary Air-Bearing Stages
ABRS Rotary Air Bearing Stage
- Tabletop Diameter:
128.1-278.1 mm
Resolution:
0.18-0.036 arc sec
Bi-Directional Repeatability:
<1 arc sec
ABRT Rotary Air Bearing Stage
- Tabletop Diameter:
100-200 mm
Resolution:
0.055-0.027 arc sec
Bidirectional Repeatability:
<1 arc sec
Direct-Drive Mechanical-Bearing Rotary Stages
ASRT Series Direct-Drive Rotary Stage
- Max Aperture: 130 mm
Accuracy: 15 arc sec
Load: 175 kg
ANT95-R Series Direct-Drive Rotary Stage
- Max Aperture: 11 mm
Accuracy: 10 arc sec
Load: 2.0 kg
ANT130-R Series Direct-Drive Rotary Stage
- Max Aperture: 11 mm
Accuracy: 10 arc sec
Load: 3.0 kg
ADR160 Direct Drive Rotary Stage
- Diameter: 160 mm
Accuracy: ±5 arc sec
Load: 25 kg
ADRT Direct Drive Rotary Stage
- Diameter: 146 - 260 mm
Accuracy: 5 arc sec
Load: 30 - 173 kg
ADRS Rotary Stage
- Diameter: 95 - 190 mm
Accuracy: 6 arc sec
Load: 16.9 - 56.2 lb
ARMS Direct Drive Rotary Stage
- Aperture: 8 mm - 25 mm
Resolution: 0.02 - 2 arc sec
Accuracy (Calibrated):
±2.5 arc sec
ALAR Series Direct Drive Rotary Stage
- Max Aperture: 325 mm
Accuracy: ±3.9 arc sec
Load: 6463 N
ADR175/240 Direct Drive Rotary Stage
- Diameter: 175 mm
Accuracy: ±5 arc sec
Load: 25 kg
ARA1000 Rotary Actuator
- Diameter: 342.9 mm
Accuracy: ±2 arc sec
Load: 45 kg
ADR75 Direct Drive Rotary Stage
- Diameter: 75 mm
Accuracy: ±5 arc sec
Load: 3 kg
ASR1000 Direct Drive Rotary Stage
- Diameter: 19 mm
Accuracy: ±15 arc sec
Load: 3.0 kg
ASR1100 Direct Drive Rotary Stage
- Max Aperture: 14 mm
Accuracy: ±15 arc sec
Load: 3 kg
ASR1200 Direct Drive Rotary Stage
- Max Aperture: 5.8 mm
Accuracy: ±15 arc sec
Load: 3 kg
ACS Series Rotary Stage
- Max Aperture: 30 mm
Accuracy: ±15 arc sec
Load: 140 kg
ACS LP Series Rotary Stage
- Max Aperture: 30 mm
Accuracy: ±6 arc sec
Load: 41 kg
ADRH Direct Drive Rotary Stage
- Diameter: 104.8 mm
Resolution: 3.6 arc sec
Max Rotary Speed: 2500 rpm
WaferMax T
- Diameter: 106.7 mm
Accuracy: ±5 arc sec
Load: 40 kg
Gear-Driven Mechanical-Bearing Rotary Stages
AGR Series Motorized Rotary Stage
- Aperture: 50 mm - 200 mm
Accuracy: 20 arc sec
Axial Load: 90 kg - 570 kg
ART300 Motorized Rotary Stage
- Diameter: 300 mm
Accuracy: 0.5 arc min
Load: 115 kg
ART50/100 Rotary Stages
- Diameter:
50 mm
Accuracy:
0.06 degrees
Load:
5.0 kg
Spindles
ASR2000 Series Direct-drive Spindle
- Max rotary speed:
6000 rpm in <1 second
Max load (radial/axial): 89 N
Total error motion (radial/axial): 5 µm/2 µm
ABS2000 Series Air Bearing Spindle
- Max rotary speed: 6000 rpm
Max load (radial/axial):
66 N - 178 N
Synchronous error motion (radial/axial): <100 nm
Options and Accessories
ABF Air Bearing Filtration Unit
- The air-bearing filtration unit (ABF) is used to clean
and condition the compressed air used to supply air-bearing mechanics. It is
compatible with both linear and rotary
air-bearing stages.
ETM Enhanced Throughput Module
- Aerotech's ETM modules help improve the positioning
performance of high-dynamic motion systems by directly measuring the
unwanted motion of the machine base and communicating it back to the
controller.
By working in concert with the Dynamic Controls Toolbox and the Aerotech
controllers, they allow the servo system to do a superior job of executing
the desired motion path.
MXH Series Multipliers
- Interpolation:
x200 - x2000
Output Signal:
Square Wave,
RS-422,TTL compatible
Power Supply:
5V ±5% (180 mA)
Joystick
- The joystick has an easy plug-in connection. JI Model is
sealed for harsh environments. Dedicated function buttons; extension cable
available.
Terminal Block
- 25/37 conductor, D-shell configuration; 50 conductor,
dual row header configuration; convenient screw-terminal interface; DIN
mount: Use to interface to PSO options.
Cables
- Quickly interface to Aerotech controllers, drives,
motors, and accessories. High-density cables reduce the need for multiple
cables.
Filters
- Aerotech’s UFM noise filter module is used to reduce
conducted line noise generated by switching servo amplifiers.
The UFM is used with any BA Series amplifier to conform to CE noise
directives.
MPGA32 Pendant
- A3200 multi-axis handhweel pendant provides a user
friendly interface for the manual operation and setup of up to
6 axes.
TM Series Transformers
- The TM3 transformer module provides and distributes
isolated AC and/or DC bus supply voltages for up to four Aerotech
controllers.
It is configured at the factory to provide 28 VAC, 56 VAC, 115
VAC, 40 VDC, 80 VDC, 160 VDC, or a combination of these voltages with a
maximum transformer output power capability of 300 watts.
TV Series Transformers
- High-quality isolation and autotransformers are fully
compatible with Aerotech’s drive systems that require separate transformers.
These are conservatively rated, open-frame units with mounting brackets and
lug or screw terminals for easy installation.