Navigation : EXPO21XX > QUALITY & TESTING 21XX > H15: Chemical Analysis > Sensors Europe
Sensors Europe
  • Offer Profile
  • Sensors is the leader in Portable Emissions Measurement Systems, or PEMS.

    We specialize in emissions analyzers and testing services that go where you go, ensuring compliance with worldwide measurement standards for all regulated pollutants, both on- and off- road.
Product Portfolio
  • SEMTECH Product Line of Portable Emissions Measurement Systems (PEMS)

  • Sensors' Emissions Measurement TECHnology, SEMTECH, product line has set the standard for Portable Emissions Measurement Systems (PEMS). Designed to work individually, as stand-alone analyzers, or together as a complete emissions measurement solution, the SEMTECH products ensure compliance with worldwide regulatory standards for in use emissions measurements.
    • SEMTECH®-DS
      On Board, In-Use Emissions Analyzer

    • Since it’s introduction in 2002, Sensors’ SEMTECH-DS has set the standard for Portable Emissions Measurement Systems (PEMS). Capable of monitoring the raw exhaust from both spark ignition and compression ignition engines, the DS measures CO, CO2, O2, NO, NO2 and THC, ensuring compliance with EPA’s CFR 1065.

      The DS comes complete with SENSOR Tech-PC, a powerful emissions software package, primarily intended for controlling the SEMTECH-DS and performing emissions calculations

      System Features and Benefits:
      -
      Heated FID Sampling
      - Sample Conditioning
      - NO and NO2 measurement
      - Pressure Compensation
      - Calibration Utilities
      - Test Setup Utility
      - Post Processor
      - Weather Probe
      - Shock Resistant Design

      Optional Accessories
      - Heated Sample Line
      - Vehicle Interface
      - Environmental Enclosure
      - Auxiliary Break-Out Box
      - Analog I/O Break-out Box
      - Power Supply
      - Power Splitter Cable
      - SENSOR Tech-CT
    • SEMTECH® EFM-HS
      High Speed Exhaust Flow Meter

    • Sensors’ High Speed Exhaust Flow Meter, the SEMTECH EFM-HS, adds exciting capabilities and features to the product line. With a sampling rate of up to 2500 Hz and four, dual stage differential pressure transducers, the EFM-HS accurately measures every forward and reverse flow pulsation from idle to maximum flow rate, and properly accounts for these pulsations in the exhaust flow determination. This is a tremendous advantage over low speed exhaust flowmeters which are susceptible to measurement error from high frequency pulsations. The EFM-HS also offers a long list of other performance enhancements and convenience features that set it apart from the competition.

      System Features and Benefits
      - High Speed Sampling
      - Embedded Calibration
      - Multiple Tube Sizes
      - Back Purge
      - Auto Zero
      - Weatherproof Construction
      - Heated Components

      Optional Configurations
      - High Speed Data Acquisition
      - Stand-Alone Configuration
      - Dual Channel Configuration
      - Customized Interface
    • SEMTECH®-PPMD
      Portable Particulate Measurement Device

    • The Portable Particulate Measurement Device, the SEMTECH-PPMD, is the only portable system that directly measures the mass of exhaust particulates under real world conditions, with nanogram sensitivity. The unit integrates three key, patented subsystems from the SEMTECH product line, into a single self contained unit: the Exhaust Flow Meter (EFM), the Micro Proportional Sample System (MPS), and the Carousel Quartz Crystal Micro balance (CQCM). When used in conjunction with the SEMTECH-DS, Sensors’ gaseous emissions analyzer, it can be used to measure Not-to-Exceed events, enabling complete measurement compliance with the EPA’s testing requirements.

      System Features and Benefits
      - Proportional Sampling
      - Multi-Crystal Design
      - Highly Sensitive
      - Fast Results
      - Low Maintenance
      - SEMTECH-DS Integration

      Optional Accessories
      - Micro Constant Dilution System
      - Humidifier Module
      - Horizontal Mounting Kit
      - Dual Power Cable
    • SEMTECH®-FS
      Filter System

    • The SEMTECH Filter System is a portable gravimetric sampling system used to measure the mass of exhaust particulates. It can be used either for in-use
      applicati onsor in test cells, while meeting requirements of US EPA 1065.

      The system consists of a cyclonic separator to remove coarse particles, three traditional 47 mm filter holders, a mass flow controller to adjust filter face velocity, a high capacity vacuum pump, pneumatic ball valves to engage filters, downstream isolation solenoids, and an optional heated sample line. All wetted surfaces are stainless-steel, heated to 47°C. The system can be operated from the built-in interface panel, or optionally through the SEMTECH-DS host soft ware where sampling can be automated
      based on NTE signals, engine RPM, exhaust flow rate, or other user-defined parameters.

      System Features and Benefits
      - 1065 Compliant
      - Cyclonic Separator
      - Three Filter Paths
      - Low Maintenance
      - Easy Operation

      Optional SEMTECH-DS Integration
      -
      Automated Sampling
      - Automated Filter Limits
      - Remote Use
    • SSEEMMTTEECCHH®--AAMM
      PORTABLE ACTIVITY MONITORING SYSTEM (PAMS)

    • For the past several years, SEMTECH has set the standard for testing all classes of diesel-powered vehicles and equipment under real-world operating conditions. With the SEMTECH-AM we bring real world testing to a new dimension. Although the module is small in size it is powerful in vehicle and engine information monitoring.

      System Features and Benefits

      - CE Compliance
      - Robust design
      - ODB II interface
      - GPS module
      - Wireless GPRS/GSM data transmitting or long term data logging on memory card
      - Acceleration
  • Test Cell Emissions Analyzers

  • SEMTECH Test Cell Product Line

  • The Sensors Emissions Measurement TECHnology, or SEMTECH, Test Cell product line is comprised of 19" rack mount emissions analyzers, easily customizable to meet your specific measurement needs. Each unit can operate independently, or as a complete system. Sensors' engineers work with your team from design specification through to installation, commissioning and training, ensuring complete integration and satisfaction.
    • SEMTECH®-DS
      On Board, In-Use Emissions Analyzer

    • Since it’s introduction in 2002, Sensors’ SEMTECH-DS has set the standard for Portable Emissions Measurement Systems (PEMS). Capable of monitoring the raw exhaust from both spark ignition and compression ignition engines, the DS measures CO, CO2, O2, NO, NO2 and THC, ensuring compliance with EPA’s CFR 1065.

      The DS comes complete with SENSOR Tech-PC, a powerful emissions software package, primarily intended for controlling the SEMTECH-DS and performing emissions calculations

      System Features and Benefits:
      -
      Heated FID Sampling
      - Sample Conditioning
      - NO and NO2 measurement
      - Pressure Compensation
      - Calibration Utilities
      - Test Setup Utility
      - Post Processor
      - Weather Probe
      - Shock Resistant Design

      Optional Accessories
      - Heated Sample Line
      - Vehicle Interface
      - Environmental Enclosure
      - Auxiliary Break-Out Box
      - Analog I/O Break-out Box
      - Power Supply
      - Power Splitter Cable
      - SENSOR Tech-CT
    • SEMTECH® EFM-HS
      High Speed Exhaust Flow Meter

    • Sensors’ High Speed Exhaust Flow Meter, the SEMTECH EFM-HS, adds exciting capabilities and features to the product line. With a sampling rate of up to 2500 Hz and four, dual stage differential pressure transducers, the EFM-HS accurately measures every forward and reverse flow pulsation from idle to maximum flow rate, and properly accounts for these pulsations in the exhaust flow determination. This is a tremendous advantage over low speed exhaust flowmeters which are susceptible to measurement error from high frequency pulsations. The EFM-HS also offers a long list of other performance enhancements and convenience features that set it apart from the competition.

      System Features and Benefits
      - High Speed Sampling
      - Embedded Calibration
      - Multiple Tube Sizes
      - Back Purge
      - Auto Zero
      - Weatherproof Construction
      - Heated Components

      Optional Configurations
      - High Speed Data Acquisition
      - Stand-Alone Configuration
      - Dual Channel Configuration
      - Customized Interface
    • SEMTECH®-MPS
      Micro Proportional Dilution System

    • SEMTECH Micro Proportional Dilution System (MPS) is a small and robust partial flow dilution system that meets the requirements of both US EPA CFR40, part 1065 and ISO 16183. It can be used in conjunction with an exhaust flow meter as a proportional diluter, or as a constant dilution system.

      The SEMTECH MPS controls the dilution air flow by employing a multi-bit parallel solenoid array. Each solenoid is fitted with a critical flow orifice to provide precise and repeatable flow characteristics. This patented flow technology can be operated at speeds up to 10Hz, providing a near instantaneous adjustment of sample flow. A signal from an exhaust flow meter is used to provide the proportional sampling requirements.

      System Features and Benefits
      - High Speed Operation
      - Compact Size
      - Configurable Dilution Ratios

      Optional Configurations
      - Micro Constant Dilution
    • SEMTECH®-CQCM
      Carousel Quartz Crystal Microbalance

    • SEMTECH CQCM is a crystal microbalance designed for continuous mass measurement of exhaust particulates. The system is comprised of eight crystals, each oscillating at 10 kHz. As the exhaust sample is pumped past one of the oscillating crystals, a corona discharge generates an electrostatic force, driving the particulates to collect on the crystal surface. As the particulates accumulate, the natural frequency of the crystal changes in relation to the mass.

      System Features and Benefits
      - Pre- and post conditioning of crystals while one is sampling
      - Extended duration of testing
      - Compensation for ambient conditions
      - Highly sensitive
    • SEMTECH®-PPMD
      Portable Particulate Measurement Device

    • The Portable Particulate Measurement Device, the SEMTECH-PPMD, is the only portable system that directly measures the mass of exhaust particulates under real world conditions, with nanogram sensitivity. The unit integrates three key, patented subsystems from the SEMTECH product line, into a single self contained unit: the Exhaust Flow Meter (EFM), the Micro Proportional Sample System (MPS), and the Carousel Quartz Crystal Micro balance (CQCM). When used in conjunction with the SEMTECH-DS, Sensors’ gaseous emissions analyzer, it can be used to measure Not-to-Exceed events, enabling complete measurement compliance with the EPA’s testing requirements.

      System Features and Benefits
      - Proportional Sampling
      - Multi-Crystal Design
      - Highly Sensitive
      - Fast Results
      - Low Maintenance
      - SEMTECH-DS Integration

      Optional Accessories
      - Micro Constant Dilution System
      - Humidifier Module
      - Horizontal Mounting Kit
      - Dual Power Cable
    • SEMTECH® LAMBDAMASTER
      ON-BOARD, IN-USE AIR FUEL RATIO ANALYZER

    • The SEMTECH LambdaMaster monitors air-fuel ratios and oxygen concentration with extremely fast (<100ms) response times. A state-of-the art transducer and sophisticated microprocessor are designed into a compact unit that is easy to use. Applications include:

      - Performance Monitoring
      - Transient Phase Examination
      - Checking of Mixture Quality in Engine - Fueling Systems
      - Monitoring of Drivability Characteristics

      System Features and Benefits
      - Extremely fast response
      - high accuracy
      - Automatic range change/calibration
      - Operation with HC/oxygenated fuels
      - Externally controllable
      - Built-in statistical functions
      - Heated sampling system
      - Wide sample pressure tolerance
      - RS232 & CAN interface as standard
      - Simple to operate/pre-set programs
      - Microprocessor based system

      Optional Accessories
      - Mobile Cart
      - CAN-Based Datalogger
      - Heated Line: 12' or 16'
       
    • SEMTECH®-FS
      Filter System

    • The SEMTECH Filter System is a portable gravimetric sampling system used to measure the mass of exhaust particulates. It can be used either for in-use applications or in test cells, while meeting requirements of US EPA 1065.

      The system consists of a cyclonic separator to remove coarse particles, three traditional 47 mm filter holders, a mass flow controller to adjust filter face velocity, a high capacity vacuum pump, pneumatic ball valves to engage filters, downstream isolation solenoids, and an optional heated sample line. All wetted surfaces are stainless-steel, heated to 47°C. The system can be operated from the built-in interface panel, or optionally through the SEMTECH-DS host soft ware where sampling can be automated
      based on NTE signals, engine RPM, exhaust flow rate, or other user-defined parameters.

      System Features and Benefits
      - 1065 Compliant
      - Cyclonic Separator
      - Three Filter Paths
      - Low Maintenance
      - Easy Operation

      Optional SEMTECH-DS Integration
      - Automated Sampling
      - Automated Filter Limits
      - Remote Use
  • TESTA FID Product Line

  • In addition to the SEMTECH Test Cell product line, Sensors is pleased to be the North American distributor for Testa Flame Ionization Detectors.
    • FID 3001W
      Flame-Ionisation-Detector

    • The FID 3001W measures total hydrocarbons in a wide range of applications, such as catalytic and thermal oxidiser plants, waste gas processing plants, room and environmental air, solvent recovery plants and vehicle exhaust gases. Designed with a hinged housing, the FID 3001W is easy to install and access. The wall mounted analyzer is compact, robust and weather proof.

      System Features and Benefits
      - titanium, heated sample gas filter
      - Heated to 200°C, or 300°C option
      - Filter monitoring
      - Automatic flame ignition
      - Hydrogen cut-off

      Optional Accessories
      -
      USB or RS232 interface
      - Temperature controlling module
      - Control module for temperature, pressure and H2
      - Switch module for automatic measurement range
    • FID 2010 T
      Flame-Ionisation-Detector

    • The FID 2010 T measures total hydrocarbons in a wide range of applications, such as catalytic and thermal oxidiser plants, waste gas processing plants, room and environmental air, solvent recovery plants and vehicle exhaust gases. A compact and lightweight design, it is ideal for short term measurements, and measuring points that frequently change.

      System Features and Benefits
      - titanium, heated sample gas filter
      - Heated to 200°C, or 300°C option
      - Filter monitoring
      - Automatic flame ignition
      - Hydrogen cut-off

      Optional Accessories
      - Carrying case
      - USB or RS232 interface
      - Temperature controlling module
      - Control module for temperature, pressure and H2
      - Switch module for automatic measurement range
    • FID 1230
      Flame-Ionisation-Detector

    • The FID 1230 module measures total hydrocarbons in a wide range of applications, such as catalytic and thermal oxidiser plants, waste gas processing plants, room and environmental air, solvent recovery plants and vehicle exhaust gases. The monitoring is continuous with a high accuracy.

      System Features and Benefits
      - titanium, heated sample gas filter
      - Heated to 200°C, or 300°C option
      - Filter monitoring
      - Automatic flame ignition
      - Hydrogen cut-off

      Optional Accessories
      - USB or RS232 interface
      - Temperature controlling module
      - Control module for temperature, pressure and H2
      - Switch module for automatic measurement range
      - FID 1230P with membrane pump
      - FID 1230I with air jet pump
      - Table housing
    • FID 2000MP
      Flame-Ionisation-Detector

    • The FID 2000MP analyzes hydrocarbons in SHED chambers of varying dimensions. For applications over 2.5 m3, we recommend an analyzer with a heated bypass system to ensure accurate response times. For smaller SHED chambers, we offer an analyzer that minimizes the air change rate in the chamber.

      System Features and Benefits
      - Optimal sample extraction
      - 4 span gas inlets
      - Automatic calibration
      - Automatic flame ignition
      - Digital output

      Optional Accessories
      - Heated lines
      - Zero gas generator
      - Unheated filter for inside SHED chamber
      - Heated solenoid valve
  • Inspection and Maintenance Analyzers

  • Sensors' Inspection and Maintenance line of optical benches has evolved throughout our forty year history, providing accurate emissions measurements of both gaseous emissions and smoke levels. These benches have been designed to meet all international measurement standards, while keeping costs at a minimum.
    • Automotive Microbench
      (AMB II™)
      Measures CO, CO2 and HC

    • Using Non-Dispersive Infrared (NDIR) technology, the Automotive Microbench (AMB II™) measures levels of CO, CO2 and HC in engine exhaust. The AMBII exceeds all current recognized international specifications, including California's BAR97, OIML Class 0, and ISO3930. With a low voltage supply requirement, compact size, and flexible sample flow, AMB II offers savings on peripherals and allows the design of a truly portable gas analyzer.

      System Features and Benefits
      - NDIR technology
      - Low voltage supply requirement
      - Compact size
      - Flexible sampling flow

      Optional Accessories
      - O2 electrochemical sensor
      - NOx measurement
      - Connection for an external RPM probe
      - Oil temperature
      - High resolution A/D channels
       
    • Smoke Meter (LCS™)
      Determines the opacity of diesel exhasut gas

    • The LCS is a light weight, partial stream smoke meter that determines the opacity of diesel exhaust gas. Its unique air-knife-system guarantees stable and reliable measurements while minimizing maintenance. The LCS uses the partial-stream measuring technique, which provides for direct and continuous measurement of the smoke sample. The light source is a pulsed green LED with a peak at 560nm. The detector is a solid state GaAs device and is heated to 43°C to temperature compensate the output signal.

      System Features and Benefits
      - Small Size and Lightweight
      - High Reliability
      - Proper Power Detection
      - Electric 50% Linearity Check
      - Free Acceleration & Loaded Mode (Special Probe)

      Optional Accessories
      -
      optional power input connections (230 VAC, 110VAC or 100VAC)
    • Generic Emission Module (GEMII™)
      high grade pump and filter system for the AMB II™

    • The Generic Emissions Module (GEM) is a platform for Sensors' Automotive Microbench, adding a pump and filtering system to the AMB for a complete gas analysis system. The unit is designed to be powered from a vehicle's battery.

      System Features and Benefits
      -
      Non-Dispersive Infrared (NDIR) technology

      Optional Accessories
      - O2 electrochemical sensor
      - NOx measurement
      - Connection for an external RPM proe
      - Oil temperature
      - High resolution A/D channels
    • Vehicle Mass Analysis System (VMAS™)
      Measures exhaust volume

    • Vehicle Mass Analysis System (VMAS) is a recent breakthrough in vehicle emission testing. VMAS allows for a low cost, reliable and accurate means of determining mass in centralized and decentralized vehicle Inspection/ Maintenance (I/M) programs.

      The product utilizes an innovative technique for measuring exhaust volume. This technique, coupled with current low cost NDIR gas analyzers, provides for a highly accurate and repeatable mass measurement system suitable for transient, steady state, and even idle test procedures.

      System Features and Benefits
      - Low cost
      - Accurate and repeatable
       
  • Sensors' Testing Services

  • Sensors brings 40 years of testing expertise to your door. Having pioneered the development of portable emissions monitors, Sensors, Inc. is uniquely qualified to take complete responsibility or to provide assistance to you in meeting your in-use emissions testing needs. Whether your goal is to determine the effectiveness of fuel additivies and after-treatment systems, or to meet regulatory in-use compliance testing, our engineers and technicians can help you every step of the way. Gases measured include: CO, CO2, O2, NO, NO2, THC, and NMHC, along with real-time particulate mass.
    • In-Use Compliance Testing

    • Our in-use compliance testing technicians will ensure that your vehicles meet regulatory standards. With a vast array of testing services available, select from as little or as much assistance as you need.

      Sensors' Inc. can provide any or all of the following:

      Emissions Test Equipment: CFR 40 Part 86/1065 compliant SEMTECH-DS gaseous emission measurement system, SEMTECH-EFM exhaust flowmeter, SEMTECH-PPMD particulate mass emission monitor, and associated accessories.

      Expertise
      : Trained and experienced engineers and technicians install the SEMTECH monitors on customer (end-user) owned vehicles and equipment at test locations.

      Customization
      : Customized platforms, fixtures and tailpipe adaptors to enable installation of the SEMTECH monitors on any type of vehicle or equipment, without modification to the test vehicles.
      Calibration Gases: NIST traceable calibration and audit gas bottles.

      Vehicle ECM and GPS Data
      : Connection of the SEMTECH systems to the test vehicle ECM, recording all necessary parameters and GPS data.
      Test Procedures: Trained and experienced engineers and technicians to conduct in-use compliance tests in strict adherence to EPA requirements and guidelines.

      Testing, Processing and Analysis
      : The acquisition, post-processing and analysis of emission test data. Secure and confidential storage and transfer of the test data and results.

      Consultation
      : A comprehensive report and extensive consultation with your designated emission specialists.

      EPA Reports
      : Generate reports using Sensors’ exclusive SENSOR Tech-CT post-processing software. The report is in the format that can be uploaded to EPA’s Verify (CDX) website.

      Record Maintenance and Retention
      : Maintain exhaustive records on compliance of equipment and procedures for regulatory audits and retention requirements.
       
    • Performance and Fuel Economy Testing

    • Sensors brings 40 years of testing expertise to your door. Having pioneered the development of portable emissions monitors, Sensors, Inc. is uniquely qualified to take complete responsibility or to provide assistance to you in meeting your in-use emissions testing needs. Whether your goal is to determine the effectiveness of fuel additivies and after-treatment systems, or to meet regulatory in-use compliance testing, our engineers and technicians can help you every step of the way.

      Sensors' Inc. can provide any or all of the following:

      Emissions Test Equipment
      : CFR 40 Part 86/1065 compliant SEMTECH-DS gaseous emission measurement system, SEMTECH-EFM exhaust flowmeter, SEMTECH-PPMD particulate mass emission monitor, and associated accessories.

      Expertise
      : Trained and experienced engineers and technicians install the SEMTECH monitors on customer (end-user) owned vehicles and equipment at test locations.

      Customization
      : Customized platforms, fixtures and tailpipe adaptors to enable installation of the SEMTECH monitors on any type of vehicle or equipment, without modification to the test vehicles.

      Calibration Gases
      : NIST traceable calibration and audit gas bottles.

      Vehicle ECM and GPS Data
      : Connection of the SEMTECH systems to the test vehicle ECM, recording all necessary parameters and GPS data.

      Testing, Processing and Analysis
      : The acquisition, post-processing and analysis of emission test data. Secure and confidential storage and transfer of the test data and results.

      Consultation
      : A comprehensive report and extensive consultation with your designated emission specialists.

      Record Maintenance and Retention
      : Maintain exhaustive records on compliance of equipment and procedures for regulatory audits and retention requirements.
  • Environmental Product Line

  • The Advanced Gasmitter® Series of the Environmental Applications Division, represents the latest technology achievement in Non Dispersive Infrared (NDIR) gas transducers for industrial applications such as:

    - Medical
    - Biogas
    - Gas Warning
    - Process Control
    - Gas Quality

    The modular design is easily integrated into analyzers and measurement systems, and customized for specific requirements. Refer to the Lists of Detectable Gases for each product line, to find the Advanced Gasmitter that meets your needs
    • AGM 10/30/31/32/50/101/106
      NDIR-Dual Wavelength Principle

    • The Advanced Gasmitter (AGM) series uses the latest technologies in both Non-Dispersive Infra-Red (NDIR) and thermally conductive gas transducers for industrial applications. Both types offer high accuracy, long term stability and excellent repeatability. The flexible design platform enables easy integration for the system developer.

      System Features and Benefits
      - NDIR-Dual wavelength or thermal conductivity sensor for gas measurement
      - Proven and tested for over 13 years
      - Linearized analog output (current or voltage)
      - Analog output signal with selectable time constant
      - Output signal for 2 alarm thresholds
      - RS232 Interface
      - Zero and endpoint adjustable with potentiometers
      - Temperature compensated
      - European PCB format (160mm x 100mm)

      Optional Accessories
      -
      Pressure compensation
      - Heating option
      - Versions for gas diffusion operation available
      - Certificate of compliance
    • S-AGM Plus
      Single Advanced Gasmitter® Plus

    • The Single - Advanced Gasmitter Plus (S-AGM Plus) Series is a completely revised Advanced Gasmitter® with optimized accuracy and reliability for gas measurement. A linearized output signal provides a superior signal to noise ratio, while standard temperature and pressure compensation minimize drift. Internal signal conditioning ensures accurate and reliable outputs. The S-AGM Plus series offers solutions for measuring and analyzing both industrial and environmental gases.

      System Features and Benefits
      - NDIR-Dual wavelength sensor for gas measurement
      - Low-grade drift characteristics
      - Fast response time: 5...45s
      - Improved signal to noise ratio
      - USB and RS-485 interface
      - Linearized 4 - 20 mA / 0 - 6 V analog output
      - Display for measurement range deviation: 2 - 22 mA output
      - Temperature and pressure compensation in serial
      - Web based communication software

      Optional Accessories
      - Heating option
      - Remote diagnostics over TCP/IP
      - Certificate of compliance
    • D-AGM Plus
      Dual Advanced Gasmitter® Plus

    • The Dual - Advanced Gasmitter Plus (D-AGM Plus) Series is a completely revised Advanced Gasmitter® with optimized accuracy and reliability for gas measurement. A linearized output signal provides a superior signal to noise ratio, while standard temperature and pressure compensation minimize drift. Internal signal conditioning ensures accurate and reliable outputs. The D-AGM Plus series offers solutions for measuring and analyzing both industrial and environmental gases.

      System Features and Benefits
      - NDIR-Dual wavelength sensor for gas measurement
      - Low-grade drift characteristics
      - Fast response time: 5...45s
      - Improved signal to noise ratio
      - USB and RS-485 interface
      - Linearized 4 - 20 mA / 0 - 6 V analog output
      - Display for measurement range deviation: 2 - 22 mA output
      - Temperature and pressure compensation in serial
      - Web based communication software

      Optional Accessories
      - Heating option
      - Remote diagnostics over TCP/IP
      - Certificate of compliance