• Offer Profile
  • PEWATRON supplies physical and geometrical sensors, power supplies and e-components. PEWATRON works closely with developers and is thus involved in the development process at an early stage. As a result, it is able to support you as a customer in the process of selecting the right components for a particular application. Take a look at our wide range of products and see for yourself - search, select, and order:
Product Portfolio
  • Physical Sensors

  • Wide range of physical sensors – from low cost to high end

    We have just the right physical sensors for your application. Our product range covers pressure sensors, gas sensors, accelerometers, gyros, tilt switches, pressure switches and load cells. Perhaps you need something special? If so, get in touch with us. We also develop customised solutions and will be happy to advise you.

    Our wide range covers product specifications and datasheets for physical sensors from manufacturers including Fujikura, Beck, HYB, smartGAS, Colibrys, Measurement Specialities, Colibrys, Silicon Sensing Systems and naturally from PEWATRON itself - search, select and order.
      • Gas Sensors

          • Carbondio-%

          • Gas: Carbon dioxide
            Measurement Range: 0-1%/ 0-2%/ 0-5%/ 0-10%/ 0-15%/ 0-30%/ 0-50%
            Sensor Only: No
            Sensor Incl. Electronic: Yes
            Output: RS232, 0/4-20mA, 0-10VDC
            Diffusion / Flow: No / Yes
            Remarks: NDIR

            The CARBONDIO is an CO2-module supplied on Euro-PCB. For the measuring of carbon dioxide the dual wavelength infrared method (NDIR) is being used. This technology guarantees a quick and selective measuring of the current gas concentration. With the various DIP-switches on the board the response time for instance can be adjusted 1 or 30 sec., the temperature corrections can be activated or the zero point adjustment can be made. The latter permits corrections without a fussing with a small and delicate potentiometer. The microcontroller is constantly monitoring the status of the sensor and signal the current state through LED’s in various colours; during extreme errors the output signal gets blocked accordingly. The power consumption of this module is max. 3W and is therefore suitable for a portable measuring device. Of course the electronics meet the latest EMV-regulations.

          • Carbondio-ppm

          • Gas: Carbon dioxide
            Measurement Range: 0-500ppm/ 0-1000ppm/ 0-2000ppm/ 0-5000ppm
            Sensor Only: No
            Sensor Incl. Electronic: Yes
            Output: RS232, 0/4-20mA, 0-10VDC
            Diffusion / Flow: No / Yes Remarks: NDIR

            The CARBONDIO is an CO2-module supplied on Euro-PCB. For the measuring of carbon dioxide the dual wavelength infrared method (NDIR) is being used. This technology guarantees a quick and selective measuring of the current gas concentration. With the various DIP-switches on the board the response time for instance can be adjusted 1 or 30 sec., the temperature corrections can be activated or the zero point adjustment can be made. The latter permits corrections without a fussing with a small and delicate potentiometer. The microcontroller is constantly monitoring the status of the sensor and signal the current state through LED’s in various colours; during extreme errors the output signal gets blocked accordingly. The power consumption of this module is max. 3W and is therefore suitable for a portable measuring device. Of course the electronics meet the latest EMV-regulations.

          • FCX-MC25-CH

          • Gas: Oxygen
            Measurement Range: 0-25%
            Sensor Only: No
            Sensor Incl. Electronic: Yes
            Output: 0/4-20mA, 0-10VDC, RS232/RS485
            Diffusion / Flow: No / Yes
            Remarks: Zirconia, long lifetime, integrated flow cell

            The popular oxygen sensor FCX, a reference for all oxygen sensors for the last 25 years and longer, is electronically controlled via a state-of-the-art control board for the accurate concentration measurements of oxygen. The sensor is either mounted directly on the control board, with or without a flow housing, or remote from the control board via cables.

          • FCX-MC25-extern-CH

          • Gas: Oxygen
            Measurement Range: 0-25%
            Sensor Only: No
            Sensor Incl. Electronic: Yes
            Output: 0/4-20mA, 0-10VDC, RS232/R485
            Diffusion / Flow: Yes / No
            Remarks: Zirconia, long lifetime, electronic board and sensor connected via a cable

            The popular oxygen sensor FCX, a reference for all oxygen sensors for the last 25 years and longer, is electronically controlled via a state-of-the-art control board for the accurate concentration measurements of oxygen. The sensor is either mounted directly on the control board, with or without a flow housing, or remote from the control board via cables.

            Applications:
            • Air quality monitoring • Lebensmittelindustrie
            • Food industry • Gewächshäuser
            • Greenhouses • Frucht- und Gemüselagern
            • Fruit & vegetable storages • Biogasanlagen
            • Biogas plants • Gaswarnanlagen
            • Gas security systems • Medizinische Geräte
            • Medical units • Laborgeräte
            • Laboratory equipment

          • FCX-MC95-CH

          • The popular oxygen sensor FCX, a reference for all oxygen sensors for the last 25 years and longer, is electronically controlled via a state-of-the-art control board for the accurate concentration measurements of oxygen. The sensor is either mounted directly on the control board, with or without a flow housing, or remote from the control board via cables.

            Applications:
            • Air quality monitoring • Lebensmittelindustrie
            • Food industry • Gewächshäuser
            • Greenhouses • Frucht- und Gemüselagern
            • Fruit & vegetable storages • Biogasanlagen
            • Biogas plants • Gaswarnanlagen
            • Gas security systems • Medizinische Geräte
            • Medical units • Laborgeräte
            • Laboratory equipment

          • FCX-MC95-extern-CH

          • Gas: Oxygen
            Measurement Range: 0-95%
            Sensor Only: No
            Sensor Incl. Electronic: Yes
            Output: 0/4-20mA, 0-10VDC, RS232/RS485
            Diffusion / Flow: Yes / No
            Remarks: Zirconia, Long lifetime, Electronic board and Sensor connected via a cable

            The popular oxygen sensor FCX, a reference for all oxygen sensors for the last 25 years and longer, is electronically controlled via a state-of-the-art control board for the accurate concentration measurements of oxygen. The sensor is either mounted directly on the control board, with or without a flow housing, or remote from the control board via cables.

            Applications:
            • Air quality monitoring
            • Food industry
            • Greenhouses • Frucht- und Gemüselagern
            • Fruit & vegetable storages • Biogasanlagen
            • Biogas plants • Gaswarnanlagen
            • Gas security systems • Medizinische Geräte
            • Medical units • Laborgeräte • Laboratory equipment

          • FCX-MP1000-extern-FH-CH

          • Gas: Oxygen
            Measurement Range: 0-1000 ppm
            Sensor Only: No
            Sensor Incl. Electronic: Yes
            Output: 4-20mA
            Diffusion / Flow: Yes / No
            Remarks: Zirconia, electronic board and sensor connected via a cable

            The oxygen sensor FCX-MLL is electronically controlled via a state-of-theart control board for the accurate concentration measurements of oxygen. The sensor is either mounted in a flow housing and connected with the control board via a cable

            Applications:
            • Process Industrie
            • Food industry
            • Gas security systems
            • Medical units
            • Laboratory equipment
            • Vaccum equipment

          • FCX-UC-CH

          • Gas: Oxygen
            Measurement Range: 0-25%
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: 0-60...80µA log
            Diffusion / Flow: Yes / Yes
            Remarks: Zirconia, long lifetime, fast response time

             

          • MiCS-5524 CO/VOC MOS gas sensor

          • Gas: Carbon monoxide/VOC
            Measurement Range: 0...500 ppm
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: Sensor resistance: 100-1500 kOhm (typical)
            Diffusion / Flow: Yes / Yes
            Remarks: MOS, low power for battery operation, SMD

            The MiCS-5524 is a robust MEMS sensor for indoor carbon monoxide and natural gas leakage detection; suitable also for indoor air quality monitoring; breath checker and early fire detection.

          • MiCS-5914 Ammonia MOS gas sensor

          • Gas: Ammonia
            Measurement Range: 1-500 ppm
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: Sensor resistance: 10-1500 kOhm (typical)
            Diffusion / Flow: Yes / Yes
            Remarks: MOS, low power for battery operation, SMD

            The MiCS-5914 is a robust MEMS sensor for ammonia detection; suitable also for gas leak detection and indoor and outdoor air quality monitoring.

          • MiCS-6814 CO/NO2/Ammonia MOS gas sensor

          • Gas: Carbon monoxide/Nitrogen dioxide/Ammonia
            Measurement Range: 1...1000 ppm/50...5000 ppb/1...300 ppm
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: Sensor resistance: 100-1500/0.8-20/10-1500 kOhm (typical)
            Diffusion / Flow: Yes / Yes
            Remarks:
            - MOS, low power for battery operation, SMD
            - Dual gas sensor optimized for carbon monoxide, nitrogen dioxide and ammonia gas detection in the range 1 to 1000 ppm, 50 to 5000 ppb and 1 to 300 ppm, respectively

            The MiCS-6814 is a compact MOS sensor with three fully independent sensing elements on one package. It is a robust MEMS sensor for the detection of pollution from automobile exhausts and for agricultural/industrial odors

          • MiCS-VZ-89TE

          • Application: HVAC
            Gas: Volatile Organic Carbon compounds (VOCs), Carbon dioxide Equivalent
            Measurement Range: 0-1000 ppm / 0-2000 ppm (Eq.)
            Sensor Only: No
            Sensor Incl. Electronic: Yes
            Output: I2C
            Diffusion / Flow: Yes / No
            Remarks: MOS, Indoor Air Quality, 3.3 VDC

            The MiCS-VZ-86/89 is an integrated sensor board for Indoor Air Quality monitoring.

            The MiCS-VZ-86/89 combines state-of-the-art MOS sensor technology with intelligent detection algorithms to monitor VOCs and CO2 equivalent variations in confined spaces, e.g. meeting rooms or vehicle cabins. The dual signal output can be used to control ventilation on-demand, saving energy and reducing cost-ofownership.

          • MP-7217-TC MEMS Pellistor

          • Gas: Methane, Flammable gases and vapours
            Measurement Range: up to 5% Methane in air/100% Methane (TC)
            Sensor Only: No
            Sensor Incl. Electronic: Yes
            Output: Minimum 12mV/%Methane; 3mV/%Methane (TC)
            Diffusion / Flow: Yes / Yes
            Remarks: MEMS, low power for battery operation

            MP-7217-TC Combined Flammable and Volume Percent Methane Sensor The MP-7217-TC gas sensor has been designed to measure Methane over the explosive concentration range and up to 100% by volume. The explosive range is measured with the sensor in Catalytic mode where the target gas is reacted on the detector bead. The 100% volume range is measured with the detector bead replaced by a resistor and the compensating bead measuring the target gas concentration by virtue of its change in thermal conductivity. The sensor also contains an externally digital controllable onboard switch, facilitating the change from the catalytic mode to thermal conductivity mode and back again. An on- board temperature sensor also provides a temperature output to allow an instrument microprocessor to carry out temperature compensation.

          • SGX-4CO

          • Gas: Carbon monoxide
            Measurement Range: 0…1000ppm
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: 70±25nA/ppm CO
            Diffusion / Flow: Yes/Yes
            Remarks: Electrochemical toxic cell for portable applications
          • SGX-4OX

          • Application: HVAC
            Gas: Oxygen
            Measurement Range: 0-25%
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: 100+/-30µA@25vol% O2
            Diffusion / Flow: Yes / Yes
            Remarks: Electrochemical cells, > 2 years in operation, portable applications
          • SGX-7NH3

          • Gas: Ammonia
            Measurement Range: 0…100ppm
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: 115±45nA/ppm NH3
            Diffusion / Flow: Yes/Yes
            Remarks: Electrochemical toxic cell for fixed installations

             

          • SGX-7OX

          • Gas: Oxygen
            Measurement Range: 0-25%
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: 200+/-30µA@25vol% O2
            Diffusion / Flow: Yes / Yes
            Remarks: Electrochemical cells, > 2 years in operation, fixed installations

             

          • SGX-SureCO

          • Gas: Carbon monoxide
            Measurement Range: 0-1000 ppm
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: 45 +/-15 nA / ppm
            Diffusion / Flow: Yes / Yes
            Remarks: Electrochemical cell, Expected operating life > 6 years in normal operation, low drift

            The SGX-SureCO: 2-electrode carbon monoxide gas sensor for HVAC applications

            Low output drift, long lifetime and no or little cross interference with other gasses

            Pewatron is pleased to present the SGX-SureCO electrochemical cell from SGX Sensortech, a company with extensive experience in the development of gas sensor products. The SGX-SureCO carbon monoxide sensor is designed for HVAC applications, where it is expected that the sensor lifetime is very long and the long-term output drift is minimized. This to ensure stability and long operation hours without having to calibrate or change the sensor.

          • VQ546MR


          • Type designation: VQ546MR
            Gas: Helium, Hydrogen, Methane
            Measurement Range: 0-100% Vol (Thermal Conductivity)
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: Wheatstone bridge output (mV), Methane positive
            Diffusion / Flow: Yes / No
            Remarks: VQ500 Head, ATEX certified II 2G Ex d IIC Gb (Ta = -40 to +55 °C), ATEX certified I M2 Ex d I Mb (Ta = -40 to +55 °C)

            The VQ500 Series is a complete range of miniature, fully certified, flameproof sensor heads containing a high quality, low power pellistor pair optimised for the detection of combustible gases or % volume gases in thermal conductivity mode. They have an outline identical to modern miniature electrochemical cells and are ideally suited for use in portable instruments. Within the VQ500 Series there are specific sensors that are able to detect most combustible gases and vapours and ammonia at LEL levels. The thermal conductivity version will detect most gases at % volume concentrations which have thermal conductivities different from that of air. The VQ500ZD/W variants have had a temperature test performed during its manufacture to confirm the temperature performance of the sensor meets the datasheet ensuring compliance to the various mining performance standards (Group 1) with regard to the temperature performance. The VQ548ZD-S variant has extra burn-in for enhanced stability.

          • VQ547TS

          • Gas: Ammonia
            Measurement Range: 0-10% LEL
            Sensor Only: Yes
            Sensor Incl. Electronic: No
            Output: Wheatstone bridge output (mV)
            Diffusion / Flow: Yes / No
            Remarks: VQ500 Head, ATEX certified II 2G Ex d IIC Gb (Ta = -40 to +55 °C), ATEX certified I M2 Ex d I Mb (Ta = -40 to +55 °C)

            The VQ500 Series is a complete range of miniature, fully certified, flameproof sensor heads containing a high quality, low power pellistor pair optimised for the detection of combustible gases or % volume gases in thermal conductivity mode. They have an outline identical to modern miniature electrochemical cells and are ideally suited for use in portable instruments. Within the VQ500 Series there are specific sensors that are able to detect most combustible gases and vapours and ammonia at LEL levels. The thermal conductivity version will detect most gases at % volume concentrations which have thermal conductivities different from that of air. The VQ500ZD/W variants have had a temperature test performed during its manufacture to confirm the temperature performance of the sensor meets the datasheet ensuring compliance to the various mining performance standards (Group 1) with regard to the temperature performance. The VQ548ZD-S variant has extra burn-in for enhanced stability

        • Pressure Sensors

            • AG2

            • Measuring Range: 0 to 0,25...12bar
              Output Signal: 0,2...4,7VDC
              Gauge: yes
              Vacuum: yes
              Accuracy: 1,5%

              The AG2 pressure sensor series is composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature compensated, calibrated and finally converted to a high level analog output voltage that is proportional with the applied pressure. The AG2 series measures gauge pressure.

              Applications:
               Battery-operated Devices
               Medical Devices
               Industrial Pneumatic Devices
               Consumer Devices

            • AG4

            • Measuring Range: 0 to 0,25...12bar
              Output Signal: I2C
              Gauge: yes
              Vacuum: yes
              Accuracy: 1,5%

              The AG4 pressure sensor series is composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature compensated, calibrated and finally converted to digital data that is proportional with the applied pressure. The AG4 series measures gauge pressure.

              Applications
               Battery-operated Devices
               Medical Devices
               Industrial Pneumatic Devices
               Consumer Devices

            • AP2

            • Measuring Range: 0 to 0,25...12bar
              Output Signal: 0,2...4,7VDC
              Gauge: yes
              Vacuum: yes
              Accuracy: 1,5%

              The AP2 pressure sensor series is composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature compensated, calibrated and finally converted to a high level analog output voltage that is proportional with the applied pressure. The AP2 series measures gauge pressure.

              Applications:
               Battery-operated Devices
               Medical Devices
               Industrial Pneumatic Devices
               Consumer Devices

            • AP4

            • Measuring Range: 0 to 0,25...12bar
              Output Signal: I2C
              Gauge: yes
              Vacuum: yes
              Accuracy: 1,5%

              The AP4 pressure sensor series is composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature compensated, calibrated and finally converted to digital data that is proportional with the applied pressure. The AP4 series measures gauge pressure.

              Applications:
               Battery-operated Devices
               Medical Devices
               Industrial Pneumatic Devices
               Consumer Devices

            • CCD53

            • Application: HVAC
              Measuring Range: 0 to 0,01...10bar
              Output Signal: 0,5...4,5V, I2C, SPI
              Gauge: yes
              Vacuum: yes
              Differential: yes
              Absolute: no
              Accuracy: 1,8/2,2%

              The Series CCD 53D is a smart pressure sensor with calibrated and digital output. The ceramic hybrid package performs excellent isolation to external stress during operation. Digital compensation of sensor offset, sensitivity, temperature drift and nonlinearity is accomplished in factory via an internal DSP running a correction algorithm with calibration coefficients stored in on-chip EEPROM.

              A variety of output configuration, including resolution, sampling rate, output interface are available to provide simple and ready-to-use solution for a wide rage of application.

              The Series CCD 53D is available for pressure range from 0.15 psi to 150 psi. . Special configuration as low as 2.5 mbar is also applicable. Please contact factory for detail.

            • CCD54

            • Application: HVAC
              Measuring Range: 0 to 0,01...10bar
              Output Signal: 0,5...4,5V, I2C, SPI
              Gauge: yes
              Vacuum: yes
              Differential: yes
              Absolute: no
              Accuracy: 1,8/2,2%

              The Series CCD Model 54A is a smart pressure transducer with ratiometric analog output. Digital compensation of sensor offset, sensitivity, temperature drift and nonlinearity is accomplished in factory via an internal DSP running a correction algorithm with calibration coefficients stored in on-chip EEPROM. A variety of characteristic configuration, including accuracy, sampling rate, temperature compensated range are available to provide simple and ready-to-use solution for a wide rage of application. It can be operated in supply voltage of 3V or 5V, and can be extended to 30V with an external JFET. The Series CCD 54A is available for pressure range from 0.15 psi to 150 psi. Special configuration as low as 2.5 mbar is also applicable. Please contact factory for detail.

            • HPSD4000

            • Measuring Range: 0 to 0,01...7bar
              Output Signal: 0,5...4,5VDC/I2C
              Gauge: yes
              Vacuum: yes
              Differential: yes
              Absolute: yes
              Accuracy: 1%

              Pressure transducer HPSD 4000 is an OEM pressure sensing device. Signal conditioning consist of complete temperature compensation and adjusted amplifier in single, programmable ASIC. High performance and accuracy enables use of this transducer in many applications. Programmable temperature compensation provides 1% total error over 0 to 70°C temperature range. Standard ratiometric 0,5 to 4,5 V and I2C digital output at the same time give OEM users maximum freedom for any type of application with dry air or non-corrosive gases and liquids. The whole group consists for pressure ranges from 10 mbar to 7 bar. Differential and absolute versions are available for this transducer group.

              Applications:
              • HVAC
              • Medical instrumentation
              • Respirators
              • Air flow monitoring
              • Process control
              • Leak detection
              • Altimeters

            • IPPS-015

            • Application: HVAC
              Measuring Range: 300...1100mBar
              Output Signal: I2C/SPI
              Gauge: no
              Vacuum: no
              Differential: no
              Absolute: yes
              Accuracy: 1%

              The IPPS-015 is a intelligent pressure sensor which consist of a MEMS piezoresistive pressure sensor and a signal conditioning ASIC. The sensor is formed in a ultra thin 8 pin LGA package. The package dimension is 4.5x4x1.1mm. The signal conditioning ASIC is a 16-bits AD convertor with embedded 512 bits OTP memory. The sensor was calibrated and temperature compensated in factory. The factors for temperature compensation were stored in OTP memory. Users can implement temperature compensation via an external micro processor. The external microprocessor read the raw output data from IPPS-015 and do simple calculation according to the factors stored in OTP memory. Therefore using IPPS-015 series is easy to get rid of bothersome calibrations and temperature compensations. IPPS-015 provide SPI or I2C digital serial output interface to communicate with microprocessors. IPPS-015 series is specially designed for low voltage and low power consumption concerned applications.

            • MIS-3600

            • Application: HLK/HVAC/CVC
              Measuring Range: 0 to 0,035...2 bar
              Output Signal: SPI or I2C
              Gauge: yes
              Vacuum: yes
              Differential: yes
              Absolute: no
              Accuracy: 1%

              The MIS-3600 is an intelligent pressure sensor which consist of a MEMS piezoresistive pressure sensor and a signal conditioning ASIC. The signal conditioning ASIC is a 16-bits AD convertor with embedded 512 bits OTP memory. The sensor was calibrated and temperature compensated in factory. The factors for temperature compensation were stored in OTP memory. Users can implement temperature compensation via an external micro processor. The external microprocessor read the raw output data from MIS-3600 and do simple calculation according to the factors stored in OTP memory. Therefore using MIS-3600 series is easy to get rid of bothersome calibrations and temperature compensations. MIS-3600 provide SPI or I2C digital serial output interface to communicate with microprocessors. MIS-3600 series is specially designed for low voltage and low power consumption concerned applications.

            • MS45x5

            • Measuring Range: 5mbar...10bar
              Output Signal: I2C or SPI
              Gauge: yes
              Vacuum: yes
              Differential: yes
              Absolute: yes
              Accuracy: 1%

              The MS4515HRD is a new generation of h igh resolution digital pressure sensors from MEAS with SPI
              and I
              2C bus interface. The sensor module includes a high linearity pressure sensor and an ultra low power 24-bit ∆Σ ADC with internal factory calibrated coefficients. It provides a precise digital 24-bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation of a thermometer function without any additional sensor. The MS4515HRD can be interfaced to virtually any microcontroller.
              The communication protocol is simple, without the need of programming internal registers in the device.
              This new sensor module generation is based on leading MEMS technology and latest benefits from MEAS proven experience and know-how in high volume manufacturing of pressure modules, which have been widely used for over a decade. The sensing principle employed leads to very low hysteresis and high stability of both pressure and temperature signal

            • MS8607

            • Application: HVAC
              Measuring Range: 10...2000mBar, 0...100%RH, -40°C...85°C
              Output Signal: I2C
              Gauge: no
              Vacuum: no
              Differential: no
              Absolute: yes
              Accuracy: 1%

              The MS8607 is the novel digital fusion sensor of MEAS providing 3 environmental physical measurements all-inone: pressure, temperature and humidity (PTH). This product is optimal for applications in which key requirements such as ultra low power consumption, high PTH accuracy and compactness are critical. High pressure resolution combined with high PTH linearity makes the MS8607 an ideal candidate for environmental monitoring and altimeter in smart phones and tablet PC, as well as PTH applications such as HVAC and weather stations. This new sensor module generation is based on leading MEMS technologies and latest benefits from Measurement pecialties proven experience and know-how in high volume manufacturing of sensor modules, which has been widely used for over a decade.

            • SLP35

            • Measuring Range: 0 to 0,02...2bar
              Output Signal: 0,5...4,5V or SPI
              Gauge: yes
              Vacuum: yes
              Differential: yes
              Absolute: no
              Accuracy: 1,8/4,5%

              The SLP 35A Series are fully compensated and amplified pressure sensors. The series is easily one of the smallest dual port pressure sensors on the market today and enables differential pressure sensors to be fitted into the most compact of enclosures.
              The Series employs the latest ASIC technology with temperature compensation of span, offset and linearity. Calibration coefficients are stored in an on-board EEPROM. Pressure ranges are available from 0.3 to 30 psi. Ratiometric output at 5V excitation is 0.5 to 4.5 V. Pressure connection is through Tygon tube on the pressure port. Custom calibrations are available please contact the factory for details.

            • AL4

            • Measuring Range: 0 to 20...100 mbar
              Output Signal: I2C
              Gauge: yes
              Vacuum: yes
              Differential: yes
              Accuracy: 1,5%

              The AL4 pressure sensor series is a low pressure and digital output pressure sensor. It composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature compensated, calibrated and finally converted to digital data that is proportional with the applied pressure.

          • Geometric sensors

          • You will find just the right geometric sensor to meet your needs in our extensive range. Our product range covers angle sensors, linear position sensors, inclinometers, manual encoder, rotary encoders, linear stroke encoder, cable actuated position sensors, magnetic tape sensors, LVDTs. Perhaps you need something special? If so, get in touch with us. We also develop tailored solutions and will be happy to advise you.
              • Angle Sensors

                  • Angle Sensors: CP-2HA

                  • Comment: 5VDC, single & Dual output
                    Option: dual output crossed, parallel or phased
                    Angle el.[°]: 100, 200, 350
                    linearity [%FS]: 1
                    Environment: IP65
                    Output Type: U 10%-90%Vin
                    Mounting: flange
                  • Angle Sensors: CP-3HABS

                  • Comment: 5VDC, with connector, replacement for QP-3HA
                    Option: return spring, single/dual output, IP65, optional without connector
                    Angle el.[°]: 90, 60
                    linearity [%FS]: 3
                    Environment: IP65 / IP54
                    Output Type: U 10%-90%Vin
                    Mounting: flange
                  • Angle Sensors: CPP-45B

                  • Comment: Ball bearing
                    Option: *up to 8 taps, *centertap, *up to 8 gangs,
                    Angle el.[°]: 350
                    linearity [%FS]: 0.3
                    Output Type: R
                    Mounting: servo Ø45
                  • Angle Sensors: CP-2FABSJ

                  • Comment: with backspring & shaft DD cut
                    Option: *without backspring, * dual output, *other electr. Angle
                    Angle el.[°]: 90
                    linearity [%FS]: 03. Jan
                    Environment: IP65
                    Output Type: R
                    Mounting: flange
                • Linear Position Sensors

                    • Linear Position Sensors : LP-10HA

                    • Technology: Hall effect
                      Stroke el.[mm] : 10
                      Output: 0.5 to 4.5 VDc
                      Linearity [%FS]: 1.1
                      Case section [mm]: 22.2
                      Environment: IP65 on the back
                      El. Connection: lead wires & AMP Connector
                    • Linear Position Sensors : LP-10F

                    • Technology: Cond Plastic
                      Stroke el.[mm] : 10
                      Output: R
                      Linearity [%FS]: 1
                      Case section [mm]: 24
                      El. Connection: Pins
                    • Linear Position Sensors : LP-10FB

                    • Technology: Cond Plastic
                      Stroke el.[mm] : 10
                      Output: R
                      Linearity [%FS]: 1
                      Case section [mm]: 24
                      El. Connection: Pins
                    • Linear Position Sensors : LP-20FQ

                    • Technology: Cond Plastic
                      Stroke el.[mm] : 20
                      Output: R
                      Linearity [%FS]: 1
                      Case section [mm]: 8
                      El. Connection: Lead Wires
                    • Linear Position Sensors : LP-100FJS

                    • Technology: Cond Plastic
                      Stroke el.[mm] : 100
                      Output: R
                      Linearity [%FS]: 0.1 / 0.3
                      Case section [mm]: 22.2
                      Environment: IP65
                      El. Connection: Coax Cable
                  • Rotary Encoders

                      • Rotary Encoders: E4T

                      • Category: Incrmental Kit Hollow
                        Resolution /CPR: 100 to 300
                        Case Ø [mm]: 22
                        Line Driver: no
                        Signal: AB
                        Temp.-Range [°C]: -20 to 100
                        Shaft & Bore Ø [mm]: 2 to 6.35
                      • Rotary Encoders : E5

                      • Category: Incrmental Kit Hollow
                        Resolution /CPR: 32 to 5000
                        Case Ø [mm]: 31
                        Line Driver: yes
                        Signal: ABZ
                        Temp.-Range [°C]: -40 to 100 (-25 for CPR 2000+)
                        Shaft & Bore Ø [mm]: 2 to 10
                      • Rotary Encoders : EC35

                      • Category: Motor Commutation
                        Resolution /CPR: 500 to 10\'000
                        Case Ø [mm]: 38
                        Line Driver: Yes
                        Signal: ABZ, UVW
                        Temp.-Range [°C]: -20 to +105
                        Shaft & Bore Ø [mm]: 5 to 10
                      • Rotary Encoders : Hubdisk-1

                      • Category: Disk
                        Resolution /CPR: 32 to 5000
                        Case Ø [mm]: 25.4
                        Shaft & Bore Ø [mm]: 2 to 10
                      • Rotary Encoders : 7S

                      • Category: Incremental Shaft
                        Resolution /CPR: 100, 200, 400
                        Case Ø [mm]: 7
                        Line Driver: Nein
                        Signal: ABZ
                        Temp.-Range [°C]: -10 to +85
                        Shaft & Bore Ø [mm]: 1.5
                    • Reliable Electronic Components

                        • DC-Current Sensors

                            • DC-Current Sensors : RAZP-2000

                            • Measuring range [A]: 2000
                              Error [%]: 0.1
                              Output signal: 0.5 ~ 4.5 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: -
                              Case type: -
                              Mounting: Schraub-
                            • DC-Current Sensors : RAZFL-105FQCG

                            • Measuring range [A]: 1000
                              Error [%]: linearity & hysteresis error: 0.5%
                              Output signal: 0.5~4.5V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: 27
                              Case type: Cable Mounted
                              Mounting: Cable Mounted
                            • DC-Current Sensors : RAZV152-2

                            • Measuring range [A]: 0.04
                              Error [%]: 1
                              Output signal: 1.5 ~ 3.5 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: -
                              Case type: -
                              Mounting: Print-, stehend
                            • DC-Current Sensors : RAZCP

                            • Measuring range [A]: 80
                              Error [%]: 0.1
                              Output signal: 1 ~ 4 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: 5
                              Case type: Durchsteck-SW
                              Mounting: Print-, liegend
                            • DC-Current Sensors : RAZ3-203AQAF

                            • Measuring range [A]: 20
                              Error [%]: 1
                              Output signal: 1.5 ~ 3.5 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: -
                              Case type: -
                              Mounting: Print-, stehend
                            • DC-Current Sensors : RAZCL-603SHBG

                            • Measuring range [A]: 60
                              Error [%]: 0.1% Linearity (Hysteresis: 10mA)
                              Output signal: 0 ~ ±2.5V (3.3V supply: 0 ~ ±1.65V)
                              Supply voltage [V]: 5V (3.3V available)
                              Opening diameter [mm]: 11.5
                              Case type: Durchsteck-SW
                              Mounting: Print-, liegend
                            • DC-Current Sensors : RAZL-1500-FAM

                            • Measuring range [A]: 1000
                              Error [%]: 1
                              Output signal: 0 ~ 4 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: -
                              Case type: -
                              Mounting: Schraub-
                            • DC-Current Sensors : RAZU-2

                            • Measuring range [A]: 60
                              Error [%]: 1
                              Output signal: 1.5 ~ 3.5 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: 10 x 4
                              Case type: Durchsteck-SW
                              Mounting: Print-, liegend
                            • DC-Current Sensors : RAZCH

                            • Measuring range [A]: 80
                              Error [%]: 1
                              Output signal: 1 ~ 4 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: 5
                              Case type: Durchsteck-SW
                              Mounting: Print-, liegend
                            • DC-Current Sensors : RAZL-1500-TAM

                            • Measuring range [A]: 1000
                              Error [%]: 1
                              Output signal: 0 ~ 4 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: -
                              Case type: -
                              Mounting: Schraub-
                            • DC-Current Sensors : RAZC-204CUAN

                            • Measuring range [A]: 200
                              Error [%]: 0.2
                              Output signal: 0.5 ~ 4.5 V
                              Supply voltage [V]: 5 (3.3)
                              Opening diameter [mm]: 5
                              Case type: Durchsteck-SW
                              Mounting: Print-, liegend
                            • DC-Current Sensors : RAZCL-2

                            • Measuring range [A]: 100
                              Error [%]: 1
                              Output signal: 1 ~ 4 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: 11.5
                              Case type: Durchsteck-SW
                              Mounting: Print-, liegend
                            • DC-Current Sensors : RAZC-2

                            • Measuring range [A]: 100
                              Error [%]: 1
                              Output signal: 1 ~ 4 V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: 5
                              Case type: Durchsteck-SW
                              Mounting: Print-, liegend
                            • DC-Current Sensors : RAZCi-603SHBG

                            • Measuring range [A]: 60
                              Error [%]: 0.1% Linearity (Hysteresis: 10/N mA)
                              Output signal: 0 ~ ±2.5V (3.3V supply: 0 ~ ±1.65V)
                              Supply voltage [V]: 3 ~ 5.5V
                              Opening diameter [mm]: -
                              Case type: -
                              Mounting: Print
                            • DC-Current Sensors : RAZC-2-FL500

                            • Measuring range [A]: 500
                              Error [%]: linearity & hysteresis error: 0.5%
                              Output signal: 0.5~4.5V
                              Supply voltage [V]: 5
                              Opening diameter [mm]: 27
                              Case type: Cable Mounted
                              Mounting: Cable Mounted
                          • Power supplies

                          • Pewatron offers a large range of power supplies for all your applications, from cost-effective power supplies to high-end units, and even customised solutions according to your specifications. Our product range covers switching power supplies, dc-dc converters, dc-ac inverters, mains and battery charging units and power supplies for medical technology, photovoltaic units, and LED products.
                              • Desktop : PUP75

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 75
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 19, 20, 24
                                Dimension LxWxH (mm): 160x58x32 (S & SF Type 134x58x32)
                                Approvals: TÜV / CE / UL / CSA
                                Features: Energy Star V, 3 Pole Class I IEC320-C14 or C6, 2 Pole Class II IEC320-C8
                              • Desktop : PUP220

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 220
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 19, 24, 48
                                Dimension LxWxH (mm): 197x88x44
                                Approvals: TÜV / CB / CE / UL
                                Features: Energy Star V, CEC, 3 Pole Class I IEC320-C14 or IEC320-C6
                              • Desktop : PUP180

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 180
                                Number of Outputs: 1
                                Output Voltage (VDC): 18, 19, 24, 48
                                Dimension LxWxH (mm): 170x85x40.7
                                Approvals: TÜV / CB / CE / UL
                                Features: Energy Star IV, 3 Pole Class I IEC320-C14
                              • Desktop : PUP150N

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 150
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 19, 24
                                Dimension LxWxH (mm): 171x72x40
                                Approvals: Nemko / TÜV / CE / UL
                                Features: Low Standby <1W, 3 Pole Class I IEC320-C14
                              • Desktop : PUP120N

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 120
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 18, 19, 20, 24, 30, 36, 48
                                Dimension LxWxH (mm): 167x65x37
                                Approvals: Nemko / TÜV / CE / UL
                                Features: Energy Star IV, 3 Pole Class I IEC320-C6
                              • Desktop : PMP90

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 60~90
                                Number of Outputs: 1
                                Output Voltage (VDC): 5, 6, 9, 12, 13.5, 15, 18, 19, 24, 48
                                Dimension LxWxH (mm): 130x76x43.7
                                Approvals: TÜV / CE / UL
                                Features: Medical, 3 Pole Class I IEC320-C14
                              • Desktop : PMP60

                              • Input Voltage (VAC): 85~264 Universal
                                Output Power (W): 60
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 11~13, 13~17, 17~21, 21~27, 27~33, 33~39, 46~50, 5/12, 3.3/5/12, 5/12/-12, 5/15/-15, 5/24/12
                                Dimension LxWxH (mm): 147x75x46
                                Approvals: TÜV / CE / UL
                                Features: Medical, 3 Pole Class I IEC320-C14
                              • Desktop : PMP400

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 400
                                Number of Outputs: 1
                                Output Voltage (VDC): 18, 24, 28, 36, 48
                                Dimension LxWxH (mm): 250x120x49.3
                                Approvals: TÜV / CE / FCC / UL
                                Features: Medical; 3 Pole Class I IEC320-C14; Fan Cooling
                              • Desktop : PMP31

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 30
                                Number of Outputs: 1
                                Output Voltage (VDC): 5, 9, 12, 15, 24, 48
                                Dimension LxWxH (mm): 117.8x49.8x32
                                Approvals: TÜV / CE / UL
                                Features: Medical; 3 Pole Class I IEC320-C14; CEC; Energy Star Level V
                              • Desktop : PMP180

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 180
                                Number of Outputs: 1
                                Output Voltage (VDC): 19,24, 28
                                Dimension LxWxH (mm): 197x88x43
                                Approvals: TÜV / CE / FCC / UL
                                Features: Medical, 3 Pole Class I IEC320-C14, 2 Pole Class II IEC320-C8
                              • Desktop : PMP150

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 150
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 19, 24, 27, 48
                                Dimension LxWxH (mm): 207.6x82x49.7
                                Approvals: TÜV / CE / FCC / UL
                                Features: Medical, 3 Pole Class I IEC320-C14
                              • Desktop : PMP120

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 120
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 18, 19, 20, 24, 30, 36, 48
                                Dimension LxWxH (mm): 160x76x43.7
                                Approvals: TÜV / CE / FCC / UL
                              • Open Frame : RPT-60

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 60
                                Number of Outputs: 3
                                Output Voltage (VDC): 5/12/-5, 5/12/-12, 5/15/-15, 5/24/12, 3.3/5/12
                                Dimension LxWxH (mm): 101.6x50.8x29
                                Approvals: TÜV / CB / CE / UL
                                Features: Medical
                              • Open Frame : PU60A

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 60
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 5; 12; 15; 24; 48; 5/12; 5/24; 5/12/-12; 3.3/5.2/12; 5/3.3/12; 5/15/-15; 5/24/-12
                                Dimension LxWxH (mm): 101.6x50.8x30
                                Approvals: TÜV / CE / UL / CSA
                                Features: Optional C case
                              • Open Frame : PU42A

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 40
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 5; 12; 15; 24; 48; 5/12; 5/24; 5/12/-12; 3.3/5/12; 5/3.3/12; 5/15/-15; 5/24/-12
                                Dimension LxWxH (mm): 101.6x50.8x30
                                Approvals: TÜV / CE / UL / CSA
                                Features: Optional C case
                              • Open Frame : PM650

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 650
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 12, 15, 24, 27, 30, 48, 24/12, 24/15, 48/24, 48/12, 48/15, 24/12/3.3, 24/15/3.3, 24/12/5.1, 24/15/5.1, 48/12/3.3, 48/15/3.3, 48/12/5.1, 48/15/5.1
                                Dimension LxWxH (mm): 266.7x127x63.5
                                Approvals: TÜV / CE / UL
                                Features: Medical, Sense, Power Fail, Inhibit, optional B U-Profil, optional C cover
                              • Open Frame : PM60

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 60
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 5, 12, 15, 24, 48, 5/12, 5/24, 5/12/-12, 3.3/5.2/12, 5/3.3/12, 5/15/-15, 5/24/-12
                                Dimension LxWxH (mm): 101.6x50.8x30
                                Approvals: TÜV / CE / UL
                                Features: Medical, optional C cover
                              • Open Frame : PM450

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 450
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 12, 15, 24, 27, 30, 48, 24/12, 24/15, 48/24, 48/12, 48/15, 24/12/3.3, 24/15/3.3, 24/12/5.1, 24/15/5.1, 48/12/3.3, 48/15/3.3, 48/12/5.1, 48/15/5.1
                                Dimension LxWxH (mm): 254x127x63.5
                                Approvals: TÜV / CE / UL
                                Features: Medical, Sense, Power Fail, Inhibit, optional B U-Profil, optional C cover
                              • Open Frame : PM42

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 40
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 5, 12, 15, 24, 48, 5/12, 5/24, 5/12/-12, 3.3/5/12,5/3.3/12, 5/15/-15, 5/24/-12
                                Dimension LxWxH (mm): 101.6x50.8x30
                                Approvals: TÜV / CE / UL
                                Features: Medical, optional C cover
                              • Open Frame : PM301

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 300
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 19, 24, 30, 36, 48
                                Dimension LxWxH (mm): 152.4x76.2x35.1
                                Approvals: TÜV / CE / UL
                                Features: Medical & ITE approvals, operation up to 5000 m, efficiency 92% typical, Power Fail Detect, Inhibit, Standby output 5V/2A (optional 12V/1A), optional B L-Profile, optional C Cover with fan
                              • Open Frame : PM300

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 300
                                Number of Outputs: 1, 2, 3, 4
                                Output Voltage (VDC): 3.3, 5.1, 12, 15, 24, 30, 48, 5.1/12, 5.1/15, 5.1/24, 12/24, 5.1/12/-5, 5.1/12/-12, 5.1/15/-15, 5.1/15/-12, 5.1/12/24, 5.1/12/-12/5, 5.1/15/-15/24, 5.1/12/-12/12, 5.1/12/-15/15, 5.1/12/-12/24, 3.3/5.1/-12/12,
                                Dimension LxWxH (mm): 190.5x114.3x44.45
                                Approvals: TÜV / CE / UL
                                Features: Medical, Sense, Power Fail, Inhibit, optional B U-Profil, optional C cover
                              • Open Frame : PM201

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 200
                                Number of Outputs: 1, 2, 3, 4
                                Output Voltage (VDC): 3.3, 5.1, 12, 15, 24, 30, 48, 5.1/12, 5.1/15, 5.1/24, 12/24, 5.1/12/-5, 5.1/12/-12, 5.1/15/-15, 5.1/15/-12, 5.1/12/24, 5.1/12/-12/5, 5.1/15/-15/24, 5.1/12/-12/12, 5.1/12/-15/15, 5.1/12/-12/24, 3.3/5.1/-12/12,
                                Dimension LxWxH (mm): 177.8x101.6x38.10
                                Approvals: TÜV / CE / UL
                                Features: Medical, Power Fail, Inhibit, optional B U-Profil, optional C cover
                              • Open Frame : PM100

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 100
                                Number of Outputs: 1
                                Output Voltage (VDC): 5, 12, 15, 18, 24, 28, 36, 48
                                Dimension LxWxH (mm): 101.6x50.8x32
                                Approvals: TÜV / CE / UL
                                Features: Medical, optional C cover
                              • Boxed : PU201-C

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 200
                                Number of Outputs: 1, 2, 3, 4
                                Output Voltage (VDC): 3.3, 5.1, 12, 15, 24, 30, 48, 5.1/12, 5.1/15, 5.1/24, 12/24, 5.1/12/-5, 5.1/12/-12, 5.1/15/-15, 5.1/15/-12, 5.1/12/24, 5.1/12/-12/5, 5.1/15/-15/24, 5.1/12/-12/12, 5.1/12/-15/15, 5.1/12/-12/24, 3.3/5.1/-12/12
                                Dimension LxWxH (mm): 177.8x101.6x38.10
                                Approvals: TÜV / CE / UL
                                Features: Power Factor typ. 0.98, Power Fail, Inhibit
                              • Boxed : PSC-100-C

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 100
                                Number of Outputs: 1
                                Output Voltage (VDC): 13.8, 27.6
                                Dimension LxWxH (mm): 127x76.2x31
                                Approvals: TÜV / CB / CE / UL
                                Features: UPS Function with Charger, AC OK TTL, Battery Low Signal, Open Frame available (PSC-100-xx)
                              • Boxed : PM650-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 650
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 12, 15, 24, 27, 30, 48, 24/12, 24/15, 48/24, 48/12, 48/15, 24/12/3.3, 24/15/3.3, 24/12/5.1, 24/15/5.1, 48/12/3.3, 48/15/3.3, 48/12/5.1, 48/15/5.1
                                Dimension LxWxH (mm): 266.7x127x63.5
                                Approvals: TÜV / CE / UL
                                Features: Medical, Sense, Power Fail, Inhibit
                              • Boxed : PM60-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 60
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 5, 12, 15, 24, 48, 5/12, 5/24, 5/12/-12, 3.3/5.2/12, 5/3.3/12, 5/15/-15, 5/24/-12
                                Dimension LxWxH (mm): 101.6x50.8x30
                                Approvals: TÜV / CE / UL
                                Features: Medical
                              • Boxed : PM450-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 450
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 12, 15, 24, 27, 30, 48, 24/12, 24/15, 48/24, 48/12, 48/15, 24/12/3.3, 24/15/3.3, 24/12/5.1, 24/15/5.1, 48/12/3.3, 48/15/3.3, 48/12/5.1, 48/15/5.1
                                Dimension LxWxH (mm): 254x127x63.5
                                Approvals: TÜV / CE / UL
                                Features: Medical, Sense, Power Fail, Inhibit
                              • Boxed : PM42-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 40
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 5, 12, 15, 24, 48, 5/12, 5/24, 5/12/-12, 3.3/5/12,5/3.3/12, 5/15/-15, 5/24/-12
                                Dimension LxWxH (mm): 101.6x50.8x30
                                Approvals: TÜV / CE / UL
                                Features: Medical
                              • Boxed : PM301-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 300
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 19, 24, 30, 36, 48
                                Dimension LxWxH (mm): 173.2x84.2x40.2
                                Approvals: TÜV / CE / UL
                                Features: Medical & ITE approvals, operation up to 5000 m, efficiency 92% typical, Power Fail Detect, Inhibit, Standby output 5V/2A (optional 12V/1A), optional B L-Profile, optional C Cover with fan
                              • Boxed : PM300-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 300
                                Number of Outputs: 1, 2, 3, 4
                                Output Voltage (VDC): 3.3, 5.1, 12, 15, 24, 30, 48, 5.1/12, 5.1/15, 5.1/24, 12/24, 5.1/12/-5, 5.1/12/-12, 5.1/15/-15, 5.1/15/-12, 5.1/12/24, 5.1/12/-12/5, 5.1/15/-15/24, 5.1/12/-12/12, 5.1/12/-15/15, 5.1/12/-12/24, 3.3/5.1/-12/12,
                                Dimension LxWxH (mm): 190.5x114.3x44.45
                                Approvals: TÜV / CE / UL
                                Features: Medical, Sense, Power Fail, Inhibit
                              • Boxed : PM202-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 200
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 18, 24, 28, 36, 48
                                Dimension LxWxH (mm): 127x76x50
                                Approvals: TÜV / CE / UL
                                Features: Medical, Active PFC, Power Fail, Inhibit
                              • Boxed : PM201-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 200
                                Number of Outputs: 1, 2, 3, 4
                                Output Voltage (VDC): 3.3, 5.1, 12, 15, 24, 30, 48, 5.1/12, 5.1/15, 5.1/24, 12/24, 5.1/12/-5, 5.1/12/-12, 5.1/15/-15, 5.1/15/-12, 5.1/12/24, 5.1/12/-12/5, 5.1/15/-15/24, 5.1/12/-12/12, 5.1/12/-15/15, 5.1/12/-12/24, 3.3/5.1/-12/12,
                                Dimension LxWxH (mm): 177.8x101.6x38.10
                                Approvals: TÜV / CE / UL
                                Features: Medical, Power Fail, Inhibit
                              • Boxed : PM1100-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 1100
                                Number of Outputs: 1
                                Output Voltage (VDC): 24, 28, 32, 36, 48
                                Dimension LxWxH (mm): 235x150x61
                                Approvals: TÜV / CE / UL (pending)
                                Features: Medical, Sense, Power Fail, Inhibit, PS Off & DC OK signals,
                              • Boxed : PM100-C

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 100
                                Number of Outputs: 1
                                Output Voltage (VDC): 5, 12, 15, 18, 24, 28, 36, 48
                                Dimension LxWxH (mm): 101.6x50.8x32
                                Approvals: TÜV / CE / UL
                                Features: Medical, Option C case
                              • Boxed : PBSN6501

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 650
                                Number of Outputs: 1
                                Output Voltage (VDC): 48
                                Dimension LxWxH (mm): 266.7x127x63.5
                                Approvals: TÜV / CE / UL
                                Features: PFC, Sense
                              • Boxed : HDP-190

                              • Input Voltage (VAC): 90~264 Universal Output Power (W): 190 Number of Outputs: 2 Output Voltage (VDC): 2.8/3.8 Dimension LxWxH (mm): 215x115x36 Approvals: TÜV / CB / CE / UL Features: PFC, Conformal Coating, High Efficiency up to 86%, Suitable for moving sign applications
                              • U and L Bracket : PU450-B

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 450
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 12; 15; 24; 27; 30; 40; 48; 55; 24/12; 24/15; 48/24; 48/12; 48/15; 24/12/3.3; 24/15/3.3; 24/12/5.1; 24/15/5.1; 48/12/3.3; 48/15/3.3, 48/12/5.1; 48/15/5.1
                                Dimension LxWxH (mm): 254x127x63.5
                                Approvals: TÜV / CE / UL
                                Features: Sense, Power Fail, Inhibit
                              • U and L Bracket : PU202-B

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 200
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 18, 24, 28, 36, 48
                                Dimension LxWxH (mm): 127x76x38.10
                                Approvals: TÜV / CE / UL
                                Features: Active PFC, Power Fail, Inhibit
                              • U and L Bracket : PU201-B

                              • Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 200
                                Number of Outputs: 1, 2, 3, 4
                                Output Voltage (VDC): 3.3, 5, 12, 15, 24, 30, 48, 5.1/12, 5.1/15, 5.1/24, 12/24, 5.1/12/-5, 5.1/12/-12, 5.1/15/-15, 5.1/15/-12, 5.1/12/24, 5.1/12/-12/5, 5.1/15/-15/24, 5.1/12/-12/12, 5.1/12/-15/15, 5.1/12/-12/24, 3.3/5.1/-12/12
                                Dimension LxWxH (mm): 177.8x101.60x38.10
                                Approvals: TÜV / CE / UL / CSA
                                Features: Power Fail, Inhibit
                              • U and L Bracket : PM650-B

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 650
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 12, 15, 24, 27, 30, 48, 24/12, 24/15, 48/24, 48/12, 48/15, 24/12/3.3, 24/15/3.3, 24/12/5.1, 24/15/5.1, 48/12/3.3, 48/15/3.3, 48/12/5.1, 48/15/5.1
                                Dimension LxWxH (mm): 266.7x127x63.5
                                Approvals: TÜV / CE / UL
                                Features: Medical, Sense, Power Fail, Inhibit
                              • U and L Bracket : PM450-B

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 450
                                Number of Outputs: 1, 2, 3
                                Output Voltage (VDC): 12, 15, 24, 27, 30, 48, 24/12, 24/15, 48/24, 48/12, 48/15, 24/12/3.3, 24/15/3.3, 24/12/5.1, 24/15/5.1, 48/12/3.3, 48/15/3.3, 48/12/5.1, 48/15/5.1
                                Dimension LxWxH (mm): 254x127x63.5
                                Approvals: TÜV / CE / UL
                                Features: Medical, Sense, Power Fail, Inhibit
                              • U and L Bracket : PM400-B

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 400
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 18, 24, 28, 36, 48
                                Dimension LxWxH (mm): 177.8x101.6x39.6
                                Approvals: TÜV / CE / UL
                                Features: Medical, Active PFC, Inhibit, Power Fail, PS Off, DC OK, Sense, 5V/100mA Standby Output
                              • U and L Bracket : PM301-B

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 300
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 19, 24, 30, 36, 48
                                Dimension LxWxH (mm): 172.4x84.0x40.2
                                Approvals: TÜV / CE / UL
                                Features: Medical & ITE approvals, operation up to 5000 m, efficiency 92% typical, Power Fail Detect, Inhibit, Standby output 5V/2A (optional 12V/1A), optional B L-Profile, optional C Cover with fan
                              • U and L Bracket : PM300-B

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 300
                                Number of Outputs: 1, 2, 3, 4
                                Output Voltage (VDC): 3.3, 5.1, 12, 15, 24, 30, 48, 5.1/12, 5.1/15, 5.1/24, 12/24, 5.1/12/-5, 5.1/12/-12, 5.1/15/-15, 5.1/15/-12, 5.1/12/24, 5.1/12/-12/5, 5.1/15/-15/24, 5.1/12/-12/12, 5.1/12/-15/15, 5.1/12/-12/24, 3.3/5.1/-12/12,
                                Dimension LxWxH (mm): 190.5x114.3x44.45
                                Approvals: TÜV / CE / UL
                                Features: Medical, Sense, Power Fail, Inhibit
                              • U and L Bracket : PM202-B

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 200
                                Number of Outputs: 1
                                Output Voltage (VDC): 12, 15, 18, 24, 28, 36, 48
                                Dimension LxWxH (mm): 127x76x38.10
                                Approvals: TÜV / CE / UL
                                Features: Medical, Active PFC, Power Fail, Inhibit
                              • U and L Bracket : PM201-B

                              • Application: MEDICAL
                                Input Voltage (VAC): 90~264 Universal
                                Output Power (W): 200
                                Number of Outputs: 1, 2, 3, 4
                                Output Voltage (VDC): 3.3, 5.1, 12, 15, 24, 30, 48, 5.1/12, 5.1/15, 5.1/24, 12/24, 5.1/12/-5, 5.1/12/-12, 5.1/15/-15, 5.1/15/-12, 5.1/12/24, 5.1/12/-12/5, 5.1/15/-15/24, 5.1/12/-12/12, 5.1/12/-15/15, 5.1/12/-12/24, 3.3/5.1/-12/12,
                                Dimension LxWxH (mm): 177.8x101.6x38.10
                                Approvals: TÜV / CE / UL
                                Features: Medical, Power Fail, Inhibit