Videos
Loading the player ...
  • Offer Profile
  • The Lutz brand stands for fluid handling using drum and container pumps. In the year 1954 the company founder Karl Lutz started making electrical drum and container pumps in Wertheim. In recent years, the brand has developed into a synonym for complete systems designed to handle any fluid filling and transfer job.
Product Portfolio
  • Drum and Container Pumps

      • Pump Sets

          • Pump Set B2 Vario PP

          • For thin-bodied fluids
            such as battery acid, ammonia solution, photographic developer /-fixer, glycols, phosphoric acid, hydrochloric acid and hydrogen peroxide. For filling small quantities from hobbocks, canisters and drums.

            • Motor 200 W internally ventilated
            • Delivery rate: up to 75 l/min
            • Delivery head: up to 7 m wc
            • Viscosity: up to 300 mPas

            Immersion length:
            500, 700 and 1000 mm available from stock

            Pump set consisting of:
            Lutz B2 Vario polypropylene, 1,5m PVC spiral hose 3/4", Lutz-nozzle PP, hose clips, wall bracket.

          • Pump Set B2 Vario SS

          • For thin-bodied fluids
            such as oil-based lubricants, cleaner solvent, plasticizer. For filling small quantities from hobbocks, canisters and drums.

            • Motor 200 W internally ventilated
            • Delivery rate: up to 68 l/min 
            • Delivery head: up to 6,5 m wc
            • Viscosity: up to 300 mPas

            Immersion length:
            500, 700 and 1000 mm available from stock

            Pump set consisting of:
            Lutz B2 Vario stainless steel, 1,5m PVC spiral hose 3/4", Lutz-nozzle PP, hose clips, wall bracket.

          • Pump Set ''Alkalis''

          • For thin-bodied alkalis
            such as sodium chloride, kalihydrate, ammonia solution, formic acid, acetic acid, etc.

            • with motor MI 4, 500 W internally ventilated
            • Delivery rate: up to 85 l/min
            • Delivery head: up to 19 m wc
            • Viscosity: up to 500 mPas

            or optionally

            • with motor MA II 3, 460 W externally ventilated
            • Delivery rate: up to 75 l/min
            • Delivery head: up to 16 m wc
            • Viscosity: up to 500 mPas

            Immersion length:
            1000 and 1200 mm available from stock

            Pump set consisting of:
            Motor MI 4 or MA II 3, Pump tube PP 41-L-SL SS
            polypropylene with stainless steel shaft, 2 m PVC spiral hose 3/4" and hose connections, nozzle PP, hose clips, drum adapter PP.

          • Pump Set ''Acids''

          • For thin-bodied acids
            such as hydrochloric acid, battery acid, ferric (III) chloride, phosphoric acid, chromic acid, citric acid, etc.

            • with Motor MA II 3, 460 W externally ventilated
            • Delivery rate: up to 75 l/min
            • Delivery head: up to 16 m wc
            • Viscosity: up to 500 mPas

            or optionally

            • with Motor MI 4, 500 W internally ventilated
            • Delivery rate: up to 85 l/min
            • Delivery head: up to 19 m wc
            • Viscosity: up to 500 mPas

            Immersion length:
            1000 and 1200 mm available from stock

            Pump set consisting of:
            Motor MI 4 or MA II 3, Pump tube PP 41-L-SL HC 
            polypropylene with Hastelloy-C shaft, 2 m PVC-hose 3/4" and hose connections, nozzle PP, hose clips, drum adapter PP.

          • Pump Set ''Concentrated acids and alkalis''

          • For concentrated acids and alkalis
            such as chloric acid, chromic acid, sulfuric acid, nitric acid, hydrofluoric acid, sodium hypochlorite, etc.

            •  with motor MA II 3, 460 W externally ventilated
            • Delivery rate: up to 75 l/min
            • Delivery head: up to 16 m wc
            • Viscosity: up to 500 mPas

            or optionally

            • with motor MA II 5, 575 W internally ventilated
            • Delivery rate: up to 80 l/min
            • Delivery head: up to 17 m wc
            • Viscosity: up to 800 mPas

            Immersion length:
            1000 and 1200 mm available from stock

            Pump set consisting of:
            Motor MA II 3 or MA II 5, Pump tube
            PVDF 41-L-SL HC polyvinylidenefluoride with Hastelloy-C shaft, 2 m special chemical hose 3/4" and hose connections, nozzle PVDF, hose clips, drum adapter PP.

          • Pump Set ''Mineral oils''

          • For light viscous mineral oil products
            such as Diesel, fuel oil, hydraulic oil, machinery oil, motor oil, etc.

            • with motor MI 4, 500 W internally ventilated
            • Delivery rate: up to 85 l/min
            • Delivery head: up to 19 m wc
            • Viscosity: up to 500 mPas

            or optionally

            • with compressed air motor MD-1, 400 W / 6 bar
            • Delivery rate: up to 90 l/min
            • Delivery head: up to 20 m wc
            • Viscosity: up to 850 mPas

            Immersion length:
            1000 and 1200 mm available from stock

            Pump set consisting of:
            Motor MI 4 or MD-1, Pump tube Alu 41-L-SL aluminium with shaft made of stainless steel, 2 m PVC spiral hose 1" and hose connections, nozzle Alu, hose clips, drum adapter PP.

          • Pump Set ''Solvents''

          • For easily flammable hydrocarbons
            such as ethanol, gasoline, butanol, isopropanol, kerosene, methanol, petroleum, etc.
            • with motor ME II 3, 460 W,
            explosion proof*
            Delivery rate: up to 95 l/min
            Delivery head: up to 14 m wc
            Viscosity: up to 350 mPas

            or optionally

            • with compressed air motor MD-2, 400 W / 6 bar, explosion proof*
            • Delivery rate: max. 110 l/min
            • Delivery head: max. 20 m wc
            • Viscosity: max. 500 mPas

            Immersion length:
            1000 and 1200 mm available from stock

            Pump set consisting of:
            Motor ME II 3 or MD-2, Pump tube SS 41-L-SL
            stainless steel, 2 m solvent hose 3/4" electrically conductive bound with hose connectors brass, nozzle brass, equipotential bounding cable, drum adapter PP (without Ex-plug).

          • Pump Set ''Hazardous mediums''

          • For hazardous fluids
            such as acetone, conc. formic acid, ethyl acetate, butyl acetate, conc. acetic acid, nicotine, toluol, styrol, etc.
            • with motor ME II 3, 460 W,
            explosion proof*
            Delivery rate: up to 95 l/min
            Delivery head: up to 14 m wc
            Viscosity: up to 350 mPas

            or optionally

            • with compressed air motor MD-2, 400 W / 6 bar, explosion proof*
            • Delivery rate: up to 110 l/min
            • Delivery head: up to 20 m wc
            • Viscosity: up to 500 mPas

            Immersion length:
            1000 and 1200 mm available from stock

            Pump set consisting of:
            Motor ME II 3 or MD-2, Pump tube SS 41-L-SL
            stainless steel, 2 m universal chemical hose 3/4" electrically conductive bound with hose connectors stainless steel, nozzle stainless steel (1.4571), equipotential bounding cable, drum adapter PP (without Ex-plug).

          • Pump Set ''Solvents'' for complete drum drainage

          • For easily flammable hydrocarbons
            such as ethanol, gasoline, butanol, isopropanol, kerosene, methanol, petroleum, etc.
            • with motor ME II 3, 460 W,
            explosion proof*
            Delivery rate: up to 77 l/min
            Delivery head up to 14 m wc
            Viscosity: up to 500 mPas

            or optionally

            • with compressed air motor MD-2, 400 W / 6 bar, explosion proof*
            • Delivery rate: up to 68 l/min
            • Delivery head: up to 17 m wc
            • Viscosity: up to 700 mPas

            Immersion length:
            1000 and 1200 mm available from stock

            Pump set consisting of:
            Motor ME II 3 or MD-2, Pump tube RE SS 41-L-MS
            stainless steel, 2 m solvent hose 3/4" electrically conductive bound with hose connectors brass, nozzle brass, equipotential bounding cable, drum adapter PP (without Ex-plug).

          • Pump set ''Hazardous mediums'' for complete drum drainage

          • For hazardous fluids
            such as acetone, conc. formic acid, ethyl acetate, butyl acetate, conc. acetic acid, nicotine, toluol, styrol, etc.

            • with motor ME II 3, 460 W, explosion proof*
            • Delivery rate: up to 77 l/min
            • Delivery head: up to 14 m wc
            • Viscosity: up to 500 mPas

            or optionally

            • with compressed air motor MD-2, 400 W / 6 bar, explosion proof*
            • Delivery rate: up to 68 l/min
            • Delivery head: up to 17 m wc
            • Viscosity: up to 700 mPas

            Immersion length:
            1000 and 1200 mm available from stock

            Pump set consisting of:
            Motor ME II 3 or MD-2, Pump tube RE SS 41-L-MS
            stainless steel, 2 m universal chemical hose 3/4" electrically conductive bound with hose connectors stainless steel, nozzle stainless steel (1.4571), equipotential bounding cable, drum adapter PP (without Ex-plug).

        • For Laboratory and Research Sector

            • Battery Pump Lutz B1 for the laboratory and research sector

            • Liquid examples:
              For decanting thin bodied acids, alkalis and chemicals such as battery acid, glycols, phosphoric acid, hydrochloric acid, ammonia water, etc.

              Features:

              • Infinitely variable speed controller for comfortable and safe filling applications
              • Chemical-resistant
              • Sophisticated battery system
              • Battery charger can be used as table unit or can be mounted onto the wall
              • Optimized complete drum drainage
              • Easy to service

              Battery pump set B1
              comprises: Battery motor 9,6 V, pump tube of polypropylene Ø 25 mm, 1,5 m PVC-hose DN 12 and hose nozzle.

              Sealing system:
              Sealless construction (SL)

              Immersion length:
              500, 700 and 1000 mm available from stock

            • Drum pump Lutz B2 Vario for the laboratory and research sector

            • Liquid examples:
              For decanting thin bodied acids, alkalis and chemicals such as battery acid, glycols, phosphoric acid, hydrochloric acid, oil-based lubricants, cleaner solvent.

              Features:

              • Infinitely variable speed controller allows a controlled filling of smaller and larger liquid amounts
              • No grease fillings
              • For the use in small vessels up to 200 liter drums
              • Wide range of applications possible due to sealless construction
              • Serially mounted hanger for storing nozzle and cable at the pump
              • Service-friendly and simple to dismantle

              Sealing system:
              Sealless construction (SL)

              Immersion length:
              500, 700 and 1000 mm available from stock

          • For Non-flammable Liquids

              • Drum pump PP 41 for corrosive and neutral liquids

              • Liquid examples:
                Acids, alkalis, galvanic fluids, phosphates, nitrates, sulphates, chlorates, etc.

                Features:

                • Suitable for corrosive and neutral, thin-bodied up to slightly viscous liquids in non-explosive areas
                • Optional with electric or air driven motors
                • No grease fillings
                • Optimized drum drainage
                • Modular, service friendly design 


                Sealing system:
                Mechanical seal (MS) or sealless construction (SL)

                Type of impeller:
                Radial-flow impeller (L) for high delivery head or
                Axial-flow rotor (R) for high flow rates.

                Immersion length:
                700 mm up to 2000 mm available from stock
                (Special lengths 200-2500 mm on request)

              • Drum pump PVDF 41 for highly corrosive chemicals and neutral liquids

              • Liquid examples:
                Bromic acid, sulphuric acid, nitric acid, dimethyl phthalate, potassium bromate, hydrofluoric acid, etc.

                Features:

                • Suitable for highly corrosive chemicals and neutral liquids in non-explosive areas
                • Optional with electric or air driven motors 
                • No grease fillings
                • Optimized drum drainage
                • Modular, service friendly design


                Sealing system:
                Mechanical seal (MS) or sealless construction (SL)

                Type of impeller:
                Radial-flow impeller (L) for high delivery head or
                Axial-flow rotor (R) for high flow rates.

                Immersion length:
                700, 1000 and 1200 mm available from stock
                (Special lengths 200-2500 mm on request)

              • Drum pump Alu 41 for neutral, non flammable liquids

              • Liquid examples:
                Thin-bodied and slightly viscous mineral oils, Diesel fuel, fuel oil, cooling lubricants, crude oil, glycerine, fatty acids, linseed oil, etc.

                Features:

                • Suitable for neutral, non flammable liquids in non-explosive areas
                • Optional with electric or air driven motors
                • No grease fillings
                • Optimized drum drainage
                • Modular, service friendly design


                Sealing system:
                Mechanical seal (MS) or sealless construction (SL)

                Type of impeller:
                Radial-flow impeller (L) for high delivery head or
                Axial-flow rotor (R) for high flow rates.

                Immersion length:
                700, 1000, 1200 and 1500 mm available from stock
                (Special lengths 200-2500 mm on request)

              • Drum pump SS 41 for corrosive and neutral liquids

              • Liquid examples:
                Alaun, borax, vinegar, freon, diethanolamine, methylene chloride, trichloromethane, etc.

                Features:

                • Suitable for corrosive and neutral liquids in non-explosive areas
                • Optional with electric or air driven motors 
                • No grease fillings 
                • Also available in physiologically safe PURE version


                Sealing system:
                Mechanical seal (MS) or sealless construction (SL)

                Type of impeller:
                Radial-flow impeller (L) for high delivery head or
                Axial-flow rotor (R) for high flow rates.

                Immersion length:
                700 up to 2000 mm available from stock
                (Special lengths 200-2500 mm on request)

              • Drum pump HC 42 for highly corrosive chemicals

              • Liquid examples:
                Bromine, chlorosulfonic acid, chlorine water, hydrofluoric acid, hydrochloric acid, etc.

                Features:

                • Suitable for highly corrosive chemicals in non-explosive areas.
                • Optional with electric or air driven motors 
                • No grease fillings
                • Optimized drum drainage 
                • Modular, service friendly design

                Sealing system:
                Sealless construction (SL)

                Type of impeller:
                Axial-flow rotor (R) for high flow rates.

                Immersion length:
                1000 and 1200 mm available from stock
                (Special lengths 200-2500 mm on request)

            • For Hazardous Liquids

                • Drum pump SS 41 Ex for highly inflammable liquids

                • Liquid examples:
                  Gasoline, solvents, alcohols, amines, benzol, toluene, xylene, paints and lacquers, etc.

                  Features:

                  • Suitable for highly inflammable liquids and for use in hazardous areas
                  • Optional with electric or air driven motors  
                  • No grease fillings
                  • Explosion-proof in compliance with ATEX Directive 94/9/EC

                   
                  Sealing system:
                  Mechanical seal (MS) or sealless construction (SL)

                  Type of impeller:
                  Radial-flow impeller (L) for high delivery head or
                  Axial-flow rotor (R) for high flow rates.

                  Immersion length:
                  700, 1000 and 1200 mm available from stock
                  (Special lengths 200-2500 mm on request)

                • Drum pump HC 42 Ex for highly inflammable chemicals

                • Liquid examples:
                  Buthylchloride, chlorosulfonic acid, gasoline, solvents, alcohols, amines, benzol, toluene, xylene, etc.

                  Features:

                  • Suitable for highly inflammable chemicals and for use in hazardous areas
                  • Optional with electric or air driven motors
                  • No grease fillings
                  • Optimized drum drainage
                  • Modular, service friendly design
                  • Explosion-proof in compliance with ATEX Directive 2014/34/EU, category 1/2


                  Sealing system:
                  Sealless construction (SL)

                  Type of impeller:
                  Axial-flow rotor (R) for high flow rates.

                  Immersion length:
                  1000 and 1200 mm available from stock
                  (Special lengths 200-2500 mm on request)

              • For AdBlue®

                    • Drum pump Lutz B2 AdBlue®

                    • Ideally suited for the transfer of AdBlue® from drums and containers.
                      The infinitely variable speed controller allows a controlled and comfortable filling of smaller and larger liquid amounts.

                      • Variable flow rate for a convenient and safe transfer
                      • All components and materials have been matched for the handling of AdBlue®
                      • Neither lubricants nor mechanical seals inside the pump are used which can cause contamination of Adblue®
                      • The sealless constuction allows dry-running
                      • A complete drum drainage is ensured

                      Universal motor 200 W, 230 V / 50 Hz or Compressed air motor 200 W

                • For Alternative Fuels

                    • Lutz Drum Pump for rape oil and vegetable oil

                    • Pump made of polypropylene

                      Universal motor 500 W, 230 V, 50 Hz, single-pole thermal overcurrent release, double-pole ON/OFF switch, splash water protected in keeping with IP 24, 5 m connection cable with plug.

                      Housing: Polypropylene
                      Nominal diameter: 41 mm
                      Connection: G 1 1/4 male
                      Delivery rate: up to 85 l/min.
                      Delivery head: up to 19 m wc
                      Weight: approx. 4 kg
                      Length: 1200 mm

                      Pump Set
                      Also available as complete pump set with individual hose lengths.

                    • Lutz Drum Pump for diesel and biodiesel

                    • Pump made of aluminium

                      Universal motor 500 W, 230 V, 50 Hz, single-pole thermal overcurrent release, double-pole ON/OFF switch, splash water protected in keeping with IP 24, 5 m connection cable with plug.

                      Housing: Aluminium
                      Nominal diameter: 41 mm
                      Connection: G 1 1/4 male
                      Delivery rate: up to 85 l/min.
                      Delivery head: up to 19 m wc
                      Weight: approx. 4 kg
                      Length: 1200 mm

                      Pump Set
                      Also available as complete pump set with individual hose lengths.

                    • Lutz Drum Pump for rape oil, vegetable oil, biodiesel and diesel

                    • Pump made of stainless steel

                      Universal motor 500 W, 230 V, 50 Hz, single-pole thermal overcurrent release, double-pole ON/OFF switch, splash water protected in keeping with IP 24, 5 m connection cable with plug.
                      Housing: Stainless steel (1.4571)

                      Nominal diameter: 41 mm
                      Connection: G 1 1/4 male
                      Delivery rate: up to 117 l/min.
                      Delivery head: up to 19 m wc
                      Weight: approx. 6 kg
                      Length: 1200 mm

                      Pump Set
                      Also available as complete pump set with individual hose lengths.

                  • For Complete Drum Drainage

                      • Drum pump RE-PP for corrosive and neutral liquids

                      • Liquid examples:
                        Acids, alkalis, galvanic solutions, hydrazine, phosphates, sulfates, nitrates, etc.

                        Features:

                        • Suitable for corrosive and neutral, thin-bodied up to slightly viscous liquids in non-explosive areas.
                        • Optimized drum drainage with a residual quantity of approx. 0,1 litres only
                        • Optional with electric or air driven motors
                        • No grease fillings


                        Sealing system:
                        Mechanical seal (MS)

                        Type of impeller:
                        Radial-flow impeller (L) for high delivery head

                        Immersion length:
                        700, 1000 and 1200 mm available from stock
                        (Special lengths 400-1500 mm on request)

                      • Drum pump RE-SS for corrosive and neutral liquids

                      • Liquid examples:
                        Alaun, borax, Diesel, freon, diethanolamine, methylene chloride, perfume oils, trichloromethane, etc.

                        Features:

                        • Suitable for corrosive and neutral, thin-bodied up to slightly viscous liquids in non-explosive areas
                        • Optimized drum drainage with a residual quantity of approx. 0,1 litres only
                        • Optional with electric or air driven motors
                        • No grease fillings
                        • Also available in physiologically safe version (PURE)
                           

                        Sealing system:
                        Mechanical seal (MS)

                        Type of impeller:
                        Radial-flow impeller (L) for high delivery head

                        Immersion length:
                        700, 1000 and 1200 mm available from stock

                      • Drum pump RE-SS Ex for highly inflammable liquids

                      • Liquid examples:
                        Gasoline, solvents, alcohols, amines, benzene, toluene, xylene, perfume oils, paints and lacquers, etc.

                        Features:

                        • Suitable for highly inflammable liquids and for use in hazardous areas
                        • Optimized drum drainage with a residual quantity of approx. 0,1 litres only
                        • Optional with electric or air driven motors
                        • No grease fillings
                        • Explosion-proof in compliance with ATEX Directive 94/9/EC, category 1/2


                        Sealing system:
                        Mechanical seal (MS

                        Type of impeller:
                        Radial-flow impeller (L) for high delivery head

                        Immersion length:
                        700, 1000 and 1200 mm available from stock
                        (Special lengths 400-2000 mm on request)

                    • For Mixing and Pumping

                        • Drum pump MP-PP for mixing and pumping

                        • Liquid examples:
                          Emulsions, suspensions, dispersions, paints and lacquers

                          Features:

                          • Suitable for mixing and pumping of corrosive and neutral, thin-bodied up to slightly viscous liquids in non-explosive areas
                          • Two functions („pumping“ and „mixing and pumping“) in one unit
                          • Optional with electric or air driven motors
                          • No grease fillings
                          • Modular, service friendly design

                          Sealing system:
                          Mechanical seal (MS) or sealless construction (SL)

                          Type of impeller:
                          Radial-flow impeller (L) for high delivery head or
                          Axial-flow rotor (R) for high flow rates.

                          Immersion length:
                          1000 and 1200 mm available from stock
                          (Special lengths 400-2000 mm on request)

                        • Drum pump MP-SS for mixing and pumping

                        • Liquid examples:
                          Emulsions, suspensions, dispersions, paints and lacquers

                          Features:

                          • Suitable for mixing and pumping of corrosive and neutral, thin-bodied up to slightly viscous liquids in non-explosive areas
                          • Two functions („pumping“ and „mixing and pumping“) in one unit
                          • Optional with electric or air driven motors 
                          • No grease fillings
                          • Modular, service friendly design

                          Sealing system:
                          Mechanical seal (MS)

                          Type of impeller:
                          Axial-flow rotor (R) for high flow rates.

                          Immersion length:
                          1000 and 1200 mm available from stock
                          (Special lengths 600-2500 mm on request)

                        • Drum pump MP-SS Ex for mixing and pumping

                        • Liquid examples:
                          Emulsions, suspensions, dispersions, paints and lacquers

                          Features:

                          • Suitable for mixing and pumping of thin-bodied highly inflammable liquids in hazardous areas.
                          • Two functions („pumping“ and „mixing and pumping“) in one unit
                          • Optional with electric or air driven motors
                          • No grease fillings
                          • Modular, service friendly design
                          • Explosion-proof in compliance with ATEX Directive 2014/34/EU, category 1/2

                          Sealing system:
                          Mechanical seal (MS)

                          Type of impeller:
                          Axial-flow rotor (R) for high flow rates

                          Immersion length:
                          1000 and 1200 mm available from stock

                      • For Container Emptying

                          • Container Pump B50

                          • Liquid examples:
                            Battery acid, ferric sulphate, glycol, phosphoric acid, hydrochloric acid, citric acid, etc.

                            Features:

                            • Suitable for the fast transfer of corrosive and neutral, thin-bodied and slightly viscous liquids from IBC-containers.
                            • High pump capacity
                            • Low speed
                            • Variable immersion depth 
                            • Adjustable container adapter for common dome caps

                            Sealing system:
                            Mechanical seal (MS)

                            Type of impeller:
                            Multistage pump housing with 3 impellers & diffusors.

                            Immersion lengt

                          • Container Pump B200

                          • Liquid examples:
                            Thin-bodied mineral oil products, emulsions, solvents, aqueous solutions, acids and alkalis, vegetable oils, cleansing- and cosmetic care products, disinfectiants

                            Features:

                            • Centrifugal pump with axial impeller in compact design
                            • Directly connected to the bottom outlet valve of the IBC with standard union nut (S60 x 6)
                            • Variable drive concept (different universal- and air-driven motors)
                            • Explosion proof versions for applications in Ex-areas (zone 1 and 2), including check valve
                            • Significantly better hydraulic capacity in comparison to hydrostatic outlet
                        • For Viscous Liquids

                            • Eccentric screw pump HD-E for medium-viscosity liquids

                            • The HD-E simply conveys the benefits of the drum pumps for thin-bodied media to the medium-viscous range.  The pump features an outer tube that is easy to detach, a bearing head with a mechanical seal and a freewheeling shaft with a eccentric screw gear acting as pumping element - all of which is easy to detach and to clean.

                              Liquid examples:
                              Ideal for pumping viscous mineral oils, cosmetic products, foodstuffs, colours, creams, etc.

                              Features:

                              • Suitable for medium-viscosity liquids from 500 to 4000 mPas
                              • Positive displacement pump according to eccentric screw principle 
                              • Light and mobile
                              • Simple and easily dismantled

                              Sealing system:
                              Mechanical seal (MS)

                              Immersion length:
                              1000 mm
                              (Special lengths 600-1500 mm on request) 

                            • Eccentric screw pump B70V-SR 12.1 and 25.1

                            • The B70V-SR is suitable for aqueous to highly-viscous substances with or without fibrous or solid matters. The pump is either operated with Lutz universal motors 230V AC or with compressed air motors.

                              Liquid examples:
                              Ideal for viscous mineral oils, cosmetic products, foodstuffs, resins, emulsions, colours, etc.

                              Features:

                              • For shear sensitive and sticky liquids from 1 to 30.000 mPas
                              • Positive displacement pump with planetary gear according to eccentric screw principle   
                              • Suitable for all Lutz universal motors and compressed air motors
                              • Easy detachable pump tube
                              • Explosion-proof version in compliance with ATEX 2014/34/EU, categorie 1/2

                              Sealing system:
                              Mechanical seal (MS) or packing gland (St)

                              Drive shaft:
                              Torsion shaft (TS) or universal joint shaft (UJ)

                              Immersion length:
                              1000 and 1200 mm

                            • Eccentric screw pump B70V-SR 50.1

                            • The B70V-SR is suitable for aqueous to highly-viscous substances with or without fibrous or solid matters. The pump is either operated with Lutz universal motors 230V AC or with compressed air motors.

                              Liquid examples:
                              Ideal for viscous mineral oils, cosmetic products, foodstuffs, resins, emulsions, colours, etc.

                              Features:

                              • For shear sensitive and sticky liquids from 1 to 20.000 mPas
                              • Positive displacement pump with planetary gear according to eccentric screw principle 
                              • Suitable for all Lutz universal motors and compressed air motors
                              • Easy detachable pump tube
                              • Explosion-proof version in compliance with ATEX Directive 2014/34/EU, category 1/2

                              Sealing system:
                              Mechanical seal (MS) or packing gland (St)

                              Drive shaft:
                              Torsion shaft (TS) or universal joint shaft (UJ)

                              Immersion length:
                              1100 and 1200 mm

                            • Eccentric screw pump B70V-D 12.1 and 25.1

                            • The B70V-D is a powerful eccentric screw pump for semi-viscous or even highly viscous, tough media right up to their flowability limits. Driven by three-phase motors or compressed air motors.

                              Liquid examples:
                              Ideal for viscous mineral oils, cosmetic products, foodstuffs, resins, emulsions, colours, etc.

                              Features:

                              • For semi-viscous or even highly-viscous liquids from 1- 100.000 mPas
                              • Positive displacement pump with bearing flange according to eccentric screw principle
                              • With electrical or air-driven drive motors
                              • Drive motor optionally with integrated frequency converter.
                              • For mobile and  stationary use
                              • Easy detachable pump tube
                              • Explosion-proof version in compliance with ATEX Directive 2014/34/EU, category 1/2

                              Sealing system:
                              Mechanical seal (MS) or packing gland (St)

                              Drive shaft:
                              Torsion shaft (TS) or universal joint shaft (UJ)

                              Immersion length:
                              1000 and 1200 mm

                            • Eccentric screw pump B70V-D 25.2 and 50.1

                            • The B70V-D is a powerful eccentric screw pump for semi-viscous or even highly viscous, tough media right up to their flowability limits. Driven by three-phase motors or compressed air motors

                              Liquid examples:
                              Ideal for viscous mineral oils, cosmetic products, foodstuffs, resins, emulsions, colours, etc.

                              Features:

                              • For semi-viscous or even highly-viscous liquids from 1- 100.000 mPas
                              • Positive displacement pump with bearing flange according to eccentric screw principle
                              • With electrical or air-driven drive motors
                              • Drive motor optionally with integrated frequency converter
                              • For mobile and stationary use
                              • Easy detachable pump tube
                              • Explosion-proof version in compliance with ATEX Directive 2014/34/EU, category 1/2

                              Sealing system:
                              Mechanical seal (MS) or packing gland (St)

                              Drive shaft:
                              Torsion shaft (TS) or universal joint shaft (UJ)

                              Immersion length:
                              1100 and 1200 mm

                            • Eccentric screw pump B70V-D 75.1

                            • The B70V-D 75.1 is a high capacity eccentric screw pump for semi-viscous or even highly viscous, tough media right up to their flowability limits. Driven by three-phase motors or compressed air motors.

                              Liquid examples:
                              Ideal for viscous mineral oils, cosmetic products, foodstuffs, resins, emulsions, colours, etc. 

                              Features:

                              • For semi-viscous or even highly-viscous liquids from 1- 100.000 mPas
                              • Special rotor/stator geometry with 50% increased capacity
                              • Sole eccentric screw drum pump with a capacity up to 75 l/min out of a bung hole drum
                              • With electrical or air-driven drive motors
                              • Drive motor optionally with integrated frequency converter
                              • For mobile and stationary use
                              • Easy detachable pump tube

                              Sealing system:
                              Mechanical seal (MS)

                              Drive shaft:
                              Universal joint shaft (UJ)

                              Immersion length:
                              1100 and 1200 mm

                            • Eccentric screw pump B70V 120.1

                            • The B70V 120.1 is a powerful eccentric screw pump for semi-viscous or even highly viscous, tough media right up to their flowability limits. Driven by three-phase motors (with or without integrated frequency converter).

                              Liquid examples:
                              Ideal for viscous mineral oils, cosmetic products, foodstuffs, resins, molasses, honey, low-viscosity grease, etc.

                              Features:

                              • For highly-viscous media, right to their flowability limits from 1- 120.000 mPas.
                              • Positive displacement pump with bearing latern accordng to eccentric screw principle.
                              • Drive motor optionally with integrated frequency converter.
                              • Orbital welded pump tube (1.4571), minimal dead-space design and polished surface.
                              • Tri Clamp connection acc. DIN 32676.
                              • Hollow type rotor.

                              Sealing system:
                              Mechanical seal (MS)

                              Drive shaft:
                              Universal joint shaft (UJ)

                              Immersion length:
                              1100 mm

                          • For Hygienic Processes

                              • Eccentric screw pump B70V-H-SR Sanitary 12.1 and 25.1

                              • The B70V-H-SR Sanitary is suitable for sheer-sensitive and viscous substances with or without fibrous or solid matters. The pump is operated with Lutz universal motors 230 V AC. 

                                Features:

                                • For liquid foodstuffs, pharmaceutical agents and cosmetic products
                                • Certified and approved according to the latest 
                                  "3-A Sanitary Standards for Centrifugal und Positive Rotary Pumps Number 02-10"
                                • Selected materials according to FDA and 3-A Standard
                                • Welded connections according to hygienic requirements of the EHEDG
                                • Tri-Clamp connection according to DIN 32676 
                                • Suitable for all Lutz universal motors 
                                • Choice of motors, light and easy to carry

                                Sealing system:
                                Mechanical seal (MS), open type spring loaded or optionally closed version. 

                                Drive shaft:
                                Torsion shaft (TS)

                                Immersion length:
                                1100 mm

                              • Eccentric screw pump B70V-H-SR Sanitary 50.1

                              • The B70V-H-SR Sanitary is suitable for sheer-sensitive and viscous substances with or without fibrous or solid matters. The pump is operated with Lutz universal motors 230 V AC. 

                                Features:

                                • For liquid foodstuffs, pharmaceutical agents and cosmetic products
                                • Certified and approved according to the latest 
                                  "3-A Sanitary Standards for Centrifugal und Positive Rotary Pumps Number 02-10"
                                • Selected materials according to FDA and 3-A Standard
                                • NEW! EPDM stator acc. to 3-A standard 18-03 class II, in conformity with EC 1935/2004
                                • Welded connections according to hygienic requirements of the EHEDG
                                • Tri-Clamp connection according to DIN 32676 
                                • Suitable for all Lutz universal motors 
                                • Choice of motors, light and easy to carry

                                Sealing system:
                                Mechanical seal (MS), open type spring loaded or optionally closed version. 

                                Drive shaft:
                                Torsion shaft (TS)

                                Immersion length:
                                1100 mm

                              • Eccentric screw pump B70V-H-D Sanitary 12.1 and 25.1

                              • The B70V-H-D Sanitary is a  powerful eccentric screw pump for shear-sensive and viscous media up to their flowability limits. Driven by three-phase motors with and without integrated frequency converter. 

                                Features:

                                • For liquid foodstuffs, pharmaceutical agents and cosmetic products
                                • Certified and approved according to the latest 
                                  "3-A Sanitary Standards for Centrifugal und Positive Rotary Pumps Number 02-10"
                                • Selected materials according to FDA and 3-A Standard
                                • Welded connections according to hygienic requirements of the EHEDG
                                • Tri-Clamp connection according to DIN 32676 
                                • With three-phase motor 
                                • Quick action coupling between motor and pump tube

                                Sealing system:
                                Mechanical seal (MS), open type spring loaded or optionally closed version. 

                                Drive shaft:
                                Torsion shaft (TS)

                                Immersion length:
                                1100 mm

                              • Eccentric screw pump B70V-H-D Sanitary 25.2 and 50.1

                              • The B70V-H-D Sanitary is a  powerful eccentric screw pump for shear-sensive and viscous media up to their flowability limits. Driven by three-phase motors with and without integrated frequency converter. 

                                Features:

                                • For liquid foodstuffs, pharmaceutical agents and cosmetic products
                                • Certified and approved according to the latest
                                  "3-A Sanitary Standards for Centrifugal und Positive Rotary Pumps Number 02-10"
                                • Selected materials according to FDA and 3-A Standard
                                • NEW! EPDM stator acc. to 3-A standard 18-03 class II, in conformity with EC 1935/2004
                                • Welded connections according to hygienic requirements of the EHEDG
                                • Tri-Clamp connection according to DIN 32676 
                                • With three-phase motor 
                                • Quick action coupling between motor and pump tube

                                Sealing system:
                                Mechanical seal (MS), open type spring loaded or optionally closed version. 

                                Drive shaft:
                                Torsion shaft (TS)

                                Immersion length:
                                1100 mm

                              • Eccentric screw pump B70V-H-D Sanitary 75.1

                              • The B70V-H-D 75.1 Sanitary is a high capacity eccentric screw pump for shear-sensive and viscous media up to their flowability limits. Driven by three-phase motors with and without integrated frequency converter. 

                                Liquid examples:

                                • For liquid foodstuffs, pharmaceutical agents and cosmetic products
                                • Certified and approved according to the latest
                                  "3-A Sanitary Standards for Centrifugal und Positive Rotary Pumps Number 02-10"
                                • Selected materials according to FDA and 3-A Standard
                                • Sole eccentric screw drum pump with a capacity up to 75 l/min out of a bung hole drum
                                • Welded connections according to hygienic requirements of the EHEDG
                                • Tri-Clamp connection according to DIN 32676
                                • With three-phase motor
                                • Quick action coupling between motor and pump tube

                                Sealing system:
                                Mechanical seal (MS), open type spring loaded or optionally closed version. 

                                Drive shaft:
                                Torsion shaft (TS)

                                Immersion length:
                                1100 mm

                            • Flow Meters

                                • Turbine Wheel Flow Meter TR

                                • Easy handling, compact built and a quick assemble to all drum and container pumps: The Lutz flow meter TR in PP or PVDF. A manageable meter which you can count on in all situations. The flow meter TR measures thin-bodied, non-inflammable liquids accurately, fast and efficiently.
                                  • Proven radial turbine technology
                                  • Can be combined with all drum and container pumps
                                  • Wide measuring range
                                  • Also for low flow rates
                                  • For thin-bodied, non-inflammable liquids
                                  • Display of partial and total volumes
                                  • Sub-total can be reset
                                  • Durable lithium battery
                                  • Easy calibration
                                  • Available in Polypropylene (PP) and Polyvinylidenfluoride (PVDF)
                                • Nutating Disc Flow Meter TS

                                • The first mobile flow meter with touch screen display will convince you with its simple requirements-oriented display and usability, multilingual interface and compact design.
                                  With plain-text instructions, system reports and help texts, as well as monitoring functions, its user controls practically eliminate errors. Manual operation is just as possible as external control.
                                  • Nutating disc principle
                                  • Optionally with or without volume preselection
                                  • Touch-screen display with multi-lingual operating menu
                                  • Comprehensive monitoring and safety functions
                                  • Unmistakeable plug-type connectors
                                  • Communication module for external control / data evaluation via standard interfaces
                                  • Available in plastic (PPO, PPS) or metal (SS, HC)
                                  • Explosion-proof versions in compliance with ATEX Directive 94/9/EC
                                • Oval Gear Flow Meter HDO

                                • Well-tried and recognised: The modular flow meter system HDO is particularly suited for industrial measurement of flow volumes of aqueous to highly viscous liquids – even at high pressures and temperatures. A significant feature of this series is the large measuring range at an almost constant measurement error limit.
                                  In addition, the flow meters operate independently of turbulences, vortexes and other disturbances in the flow profile.
                                  • Proven and reliable oval gear principle
                                  • For high flow volumes, temperatures and pressures
                                  • For thin bodied to highly viscous liquids
                                  • Optionally with or without volume preselection
                                  • Touch-screen display with multi-lingual operating menu
                                  • High accuracy
                                  • Low frictional resistance
                                  • Comprehensive monitoring and safety functions
                                  • Available in plastic (PPS) or metal (Aluminium, Stainless steel)
                                  • Explosion-proof versions in compliance with ATEX Directive 94/9/EC
                              • Double Diaphragm Pumps

                                  • Double diaphragm pump DMP 1/4'' non-metallic

                                  • Fields of application:
                                    For the laboratory sector, small plants, requirements with small delivery volume at relatively high pressure.

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Can safely run dry 
                                    • Self-priming dry or wet
                                    • Centre block made of corrosion-free plastic
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 16 l/min
                                    • Explosion-proof version in compliance with ATEX Directive 2014/34/EU, category 2

                                    Types: 

                                    • DMP 1/4" PP for neutral and aggressive liquids
                                    • DMP 1/4" PVDF for highly aggressive liquids
                                    • DMP 1/4" PA for highly inflammable liquids
                                  • Double diaphragm pump DMP 3/8'' non-metallic

                                  • Fields of application:
                                    drum and small tank transfer, pickling solutions, chemical feed, etc.

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Optional with Max-Pass™- valve system
                                    • Can safely run dry
                                    • Self-priming dry or wet
                                    • Centre block made of corrosion-free plastic
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 156 l/min

                                    Types:

                                    DMP 1" PP for neutral and aggressive liquids
                                    DMP 1" PVDF for highly aggressive liquids

                                  • Double diaphragm pump DMP 1/2'' non-metallic

                                  • Fields of application:
                                    Filter press, tank cleaning systems, pigments and resins, etc.

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Can safely run dry
                                    • Self-priming dry or wet
                                    • Centre block made of corrosion-free plastic
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 492 l/min

                                    Types:

                                    • DMP 1 1/2" PP for neutral and aggressive liquids
                                    • DMP 1 1/2" PVDF for highly aggressive liqu
                                  • Double diaphragm pump DMP 1/2'' metallic

                                  • Fields of application:
                                    Filter press, tank cleaning systems, pigments and resins, etc.

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Can safely run dry
                                    • Self-priming dry or wet
                                    • Centre block made of corrosion-free plastic
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 435 l/min
                                    • Explosion-proof version in compliance with ATEX Directive 2014/34/EU, category 2

                                    Types:

                                    • DMP 1 1/2" Aluminium for neutral and inflammable liquids
                                    • DMP 1 1/2" Stainless steel for neutral, aggressive and highly inflammable liquids
                                  • Double diaphragm pump DMP 1'' non-metallic

                                  • Fields of application:
                                    drum and small tank transfer, pickling solutions, chemical feed, etc.

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Optional with Max-Pass™- valve system
                                    • Can safely run dry
                                    • Self-priming dry or wet
                                    • Centre block made of corrosion-free plastic
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 156 l/min


                                    Types:

                                    DMP 1" PP for neutral and aggressive liquid

                                  • Double diaphragm pump DMP 1'' metallic

                                  • Fields of application:
                                    drum and small tank transfer, pickling solutions, chemical feed, etc. 

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Can safely run dry
                                    • Self-priming dry or wet
                                    • Few, easily accessible construction parts 
                                    • Flow rate up to 182 l/min
                                    • Explosion-proof version in compliance with ATEX Directive ATEX 2014/34/EU, category 2

                                    Types:

                                    • DMP 1" Aluminium for neutral and inflammable liquids
                                    • DMP 1" Stainless steel for neutral, aggressive and highly inflammable liquids
                                  • Double diaphragm pump DMP 1 1/2'' non-metallic

                                  • Fields of application:
                                    Filter press, tank cleaning systems, pigments and resins, etc.

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Can safely run dry
                                    • Self-priming dry or wet
                                    • Centre block made of corrosion-free plastic
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 492 l/min

                                    Types:

                                    • DMP 1 1/2" PP for neutral and aggressive liquids
                                    • DMP 1 1/2" PVDF for highly aggressive liquids
                                  • Double diaphragm pump DMP 1 1/2'' metallic

                                  • Fields of application:
                                    Filter press, tank cleaning systems, pigments and resins, etc.

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Can safely run dry
                                    • Self-priming dry or wet
                                    • Centre block made of corrosion-free plastic
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 435 l/min
                                    • Explosion-proof version in compliance with ATEX Directive 2014/34/EU, category 2


                                    Types:

                                    • DMP 1 1/2" Aluminium for neutral and inflammable liquids
                                    • DMP 1 1/2" Stainless steel for neutral, aggressive and highly inflammable liquids
                                  • Double diaphragm pump DMP 2'' non-metallic

                                  • Fields of application:
                                    Paint, latex, ceramic slip, slurries, polymers, tank car fill and empty, foods, etc.

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Can safely run dry
                                    • Self-priming dry or wet
                                    • Centre block made of corrosion-free plastic
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 681 l/min

                                    Types:

                                    • DMP 2" PP for neutral and aggressive liquids
                                    • DMP 2" PVDF for highly aggressive liquids 
                                  • Double diaphragm pump DMP 2'' metallic

                                  • Fields of application:
                                    Paint, latex, ceramic slip, slurries, polymers, tank car fill and empty, foods, etc.

                                    Features:

                                    • Absolutely lube-free and non stalling operation
                                    • Can safely run dry
                                    • Self-priming dry or wet
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 719 l/min
                                    • Explosion-proof version in compliance with ATEX Directive 2014/34/EU, category 2

                                    Types:

                                    • DMP 2" Aluminium for neutral and inflammable liquids
                                    • DMP 2" Stainless steel for neutral, aggressive and highly inflammable liquids
                                  • Double diaphragm pump DMP 3'' metallic

                                  • Fields of application:
                                    Paint, latex, ceramic slip, slurries, polymers, tank car fill and empty, etc.

                                    Features:

                                    • Absolutely lube-free and non stalling operation 
                                    • Can safely run dry
                                    • Self-priming dry or wet 
                                    • Few, easily accessible construction parts
                                    • Flow rate up to 954 l/min

                                    Types:

                                    • DMP 3" Aluminium for neutral and inflammable liquids 
                                    • DMP 3" Stainless steel for neutral, aggressive and highly inflammable liquids
                                • Centrifugal Pumps

                                    • Vertical Centrifugal Pumps

                                        • Immersion centrifugal pump B50

                                        • Fields of application:
                                          Suitable for recirculation of chemicals and etchants, emtying of containers and basins, etc.

                                          Features:

                                          • Suitable for the fast transfer of corrosive and neutral, thin-bodied and slightly viscous liquids 
                                          • High pump capacity
                                          • Smooth running 
                                          • Low space requirement 
                                          • Fast assembly

                                          Sealing system:
                                          Mechanical seal (MS)

                                          Type of impeller:
                                          Multistage pump housing with 3 impellers & diffusors

                                          Immersion length:
                                          1100 mm

                                        • Immersion centrifugal pump B6

                                        • Fields of application:
                                          Suitable for feed and recirculation of chemicals and solution in the chemical industry, surface treatment and water decontamination, etc.

                                          Features:

                                          • Ideal for the transfer of corrosive and neutral, aqueous to slightly viscous liquids
                                          • For stationary or mobile use
                                          • Housing made of plastic (PP) or metal (stainless steel)
                                          • 4 sizes for differing pump capability
                                          • Driven by IEC-norm motors

                                          Sealing system:
                                          Mechanical seal (MS)

                                          Immersion length:
                                          400 - 3000 mm

                                        • Vertical centrifugal pump B80 HME

                                        • Fields of applications:
                                          Centrifugal pump for dry-well installation featuring a bearing-less cantilever design with direct-coupled IEC motor. Specially designed for a plant engineering and confined spaces.

                                          The B80 HME series can be operated beside the container in a dry-well installation. Liquid flowing up inside the shaft guide tube returns to the container via an overflow line. Pumps in dry-well installations allow easier access to carry out maintenance and repair work.

                                          Features:

                                          • Direct-coupled featuring in bearing-less cantilever design 
                                          • Radial and axial fixed drive elements in two-piece motor mounting
                                          • Housing made of reinforced plastic (PP or PVDF) 
                                          • Vapour seal to protect driving elements
                                          • Shaft sleeve made of plastic
                                          • Driven by IEC standard motor

                                          Sealing system:
                                          Static-dynamic vapour seal

                                          Installation leng

                                        • Immersion centrifugal pump B80 KME

                                        • Fields of applications:
                                          Cost-effective, compact immersion centrifugal pump with plain bearing and directly-coupled IEC motor. Ideal for the low to medium performance segment.

                                          Features:

                                          • Direct-coupled pump featuring an extremely compact design 
                                          • Radial and axial fixed drive elements in two-piece motor mounting 
                                          • Housing made of reinforced plastic (PP or PVDF) 
                                          • Plain bearings made of PTFE/Al2O3 or SiC/SiC
                                          • Vapour seal to protect driving elements 
                                          • Shaft sleeve made of plastic 
                                          • Driven by IEC standard motor

                                          Sealing system:
                                          Static-dynamic vapour seal

                                          Immersion depth:
                                          600 - 1500 mm

                                        • Immersion centrifugal pump B80 KGK G1/G2

                                        • Fields of applications:
                                          Powerfull and robust immersion centrifugal pump with plain bearing, support stand mounted on roller bearings and IEC standard motor. The KGK G1/G2 series is designed for medium to high pump capacities under continiuous operation.

                                          Features:

                                          • Robust bearing housing with lifetime-greased roller bearings 
                                          • Independent support of motor and pump
                                          • Housing made of reinforced plastic (PP or PVDF)
                                          • Plain bearings made of PTFE/Al2/O3 or SiC/SiC (optional with external flushing) 
                                          • Vapour seal to protect driving elements (optional with fluid barrier or as mechanical seal) 
                                          • Version "G" with GRP-coated shaft guide tube and rising tube
                                          • Driven by IEC standard motor as per energy efficiency class IE 3 in accordance with EU regulations 640/2009 and 04/2014 

                                          Sealing system:
                                          Static-dynamic vapour seal or mechanical seal

                                          Immersion depth:
                                          500 - 4000 mm and additional suction pipe extension up to 2000 mm

                                        • Immersion centrifugal pump B80 KGK G3

                                        • Fields of applications:
                                          Powerfull and robust immersion centrifugal pump with plain bearing, support stand mounted on roller bearings and IEC standard motor. The B80 KGK G3 series is available in single- or two-stage versions equipped with one or two impellers for high pump capacities.

                                          Multi-stage pumps are used to increase the delivery pressure while retaining the compact dimensions of the hydraulic system and are used in particular for processes involving high delivery pressures und low delivery rates. The minimal space required compared with similar single-stage pumps with larger impeller diameters is particularly advantageous for restricted installation conditions.

                                          Features:

                                          • Robust bearing housing with oil-lubricated roller bearings
                                          • Independent support of motor and pump
                                          • Housing made of reinforced plastic (PP or PVDF)
                                          • Plain bearings made of PTFE/Al2/O3 or SiC/SiC (optional with external flushing)  
                                          • Vapour seal to protect driving elements (optional with fluid barrier or as mechanical seal)
                                          • Version "G" with GRP-coated shaft guide tube and rising tube
                                          • Driven by IEC standard motor as per energy efficiency class IE 3 in accordance with EU regulations 640/2009 and 04/214


                                          Sealing system:
                                          Static-dynamic vapour seal or mechanical seal

                                          Immersion depth:
                                          500 - 4000 mm and additional suction pipe extension up to 2000 mm

                                      • Horizontal Centrifugal Pumps

                                          • Magnetic drive centrifugal pump TMB

                                          • Fields of application:
                                            Ideal for low pump capacities in small systems and apparatus engineering.

                                            Features:

                                            • Driven by magnetic coupling
                                            • Pump capacity up to 65 l/min and 8 m delivery head
                                            • Covers densities up to 1.1 kg/dm3 and viscosities up to 20 mPas
                                            • Volute casing material PP (GF) or ECTFE (CF)
                                            • Connections in BSP-thread or hose connections

                                            Bearing system:

                                            • "N" (Rulon®) corossion resistant
                                          • Magnetic drive centrifugal pump AM

                                          • Fields of application:
                                            Suitable for small to medium pump capacities in the plant and apparatus construction.

                                            Features:

                                            • Driven by magnetic coupling
                                            • Pump capacity up to 200 l/min and 12 m delivery head
                                            • Covers densities up to 1.8 kg/dm3 and viscosities up to 40 mPas
                                            • Volute casing material PP (GF) or ECTFE (CF)
                                            • Explosion-proof version GX in compliance with ATEX Directive 2014/34/EU, category 2

                                            Bearing system:

                                            • „R“ (HD carbon) able for limited dry running
                                            • „X“ (silicon carbide) adequate for solids
                                            • „N“ (Rulon®) corossion resistant
                                          • Magnetic drive centrifugal pump TMR G2

                                          • Fields of application:
                                            Designed for medium to high pump capacities

                                            Features:

                                            • Driven by magnetic coupling with magnetic self-alignment system
                                            • Pump capacity up to 30 m³/h and 30 m delivery head
                                            • Covers densities up to 1.8 kg/dm3 and viscosities up to 150 mPas
                                            • Volute casing material PP (GF) or ECTFE (CF)
                                            • Connections in BSP/NPT thread or ISO/ANSI-flange
                                            • Explosion-proof version GX in compliance with ATEX Directive 2014/34/EU, category 2

                                            Bearing system:

                                            • „R“ (HD carbon) able for dry running
                                            • „X“ (silicon carbide) adequate for solids
                                            • „N“ (Rulon®) corossion resistant
                                          • Magnetic drive centrifugal pump TMR G3

                                          • Fields of application:
                                            Designed for high pump capacities

                                            Features:

                                            • Driven by magnetic coupling with magnetic self-alignment system
                                            • Pump capacity up to 48 m³/h and 42 m delivery head
                                            • Covers densities up to 1.8 kg/dm3 and viscosities up to 150 mPas
                                            • Volute casing material PP (GF) or ECTFE (CF)
                                            • Connections in BSP/NPT thread or ISO/ANSI-flange
                                            • Explosion-proof version GX in compliance with ATEX Directive 2014/34/EU, category 2

                                            Bearing system:

                                            • „R“ (HD carbon) able for dry running
                                            • „X“ (silicon carbide) adequate for solids
                                            • „N“ (Rulon®) corossion resistant